Big Lots L-GZ136PST-8 User manual

IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care directions before
attempting to assemble.
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightening.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the
structure.
5. Never barbecue under this gazebo or use lanterns that contain naked flames.
6. This package contains small items and plastic bags that should be kept away from children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so before use so
as to avoid collapsing or damage to the item, which could result in injury.
8. WARNING: Keep all flame and heat sources away from this tent fabric. This tent is made with fabric that
meets CPAI – 84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous
contact with any flame source. The application of any foreign substance to the tent fabric may render the
flame-resistant properties ineffective.
10'x10' Bamboo Gazebo Instruction Manual
Item #: L-GZ136PST-8

Screen 1 A 4
Screen 2 B 4
Top Pole Connector C 4
Pole D 4
Corner Top Pole(1) E 4
Corner Top Pole(2) E1 4
Middle Top Pole F 4
Big Center Connector G 1
Small Center Connector H 1
Hook I 1
Small Top Pole J 4
Big Canopy K 1
Small Canopy L 1
Mosquito Netting M 1
Parts List
AA 6X20 Flat Bolt 16 PCS
BB M6 Washer 52 PCS
CC M6X12 Bolt 16 PCS
DD M6X40 Bolt 12 PCS
EE M6 Nut 12 PCS
WW M6 Wrench 1 PC
Hardware Pack 1

Fig.1: Inert Screen 2 (B) into Screen 1 (A), fully tighten by M6X15 Flat Bolt (CC) and M6 Washer (BB). Then
attach Top Pole Connector (C) to Screen 1 (A) and Screen 2 (B) by (CC) and M6 Washer (BB).
Fig.2: Attach the assembled Screen to Pole (D) by M6X15 Flat Bolt (AA) and M6 Washer (BB).
Fig.3: Connect Corner Top Pole(1) (E) and Corner Top Pole(2) (E1), then attach Corner Top Pole (E1) to the top of
Pole (D) by M6X45 Bolt (DD), M6 Washer (BB) and M6 Nut (EE).
Fig.4: Put Hook (I) to Big Top Connector (G), then insert Corner Top Pole
(E) and Middle Top Pole (F) into Big Center Connector (G).
Fig.5: Attach Middle Top Pole (F) to Top Pole Connector (C) by M6X45
Bolt (DD), M6 Washer (BB) and M6 Nut (EE).
Fig.6: Insert Small Top Pole (J) into Small Center Connector (H).
Fig.7: Put Big Canopy (K) onto the Big Top, do not fold, then attach the
Small Top to Middle Top Pole (F) by M6X45 Bolt (DD), M6 Washer (BB)
and M6 Nut (EE).

Now your gazebo is ready for use.
Fig.8: Put the Small Canopy (L) to the Small
Top, then unfold Big Canopy (K), hang up
Mosquito Netting (M) to Screen 1 (A) and
Screen 2 (B) by Plastic Tie (FF).
Fig.9: Fix the gazebo by Φ8X180MM Stake
(GG).
FF Plastic Tie 40 PCS
GG Φ8X180MM Stake 12 PCS
Hardware Pack 2

USE & CARE
1. This Gazebo is not a permanent structure and should be disassembled & stored away after use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must not be left erect in windy conditions.
WARNINGS
1. Assembly Instructions must be followed.
2. Pegs and ropes supplied must be used to hold this gazebo in place when upright.
3. Keep children and pets away from the assembly area.
4. Verify that all nuts and bolts are tightly secured before and during use.
5. Warranty does not cover damage due to extreme weather conditions.