Bigassfans AirEye User manual

Quick Installation Guide
AirEye®
READ AND SAVE
THESE INSTRUCTIONS
Operating Instructions and Maintenance:
bigfans.com/support
TECHNICAL SPECIFICATIONS
Fan Size Motor
Size
Max RPM
@ 115 V
Fan
Weight*
100 V 115 V 120 V
Current Power Current Power Current Power
20 in.
(508 mm) 1/3 hp 1300 32 lb (14.5 kg) 5.0 A 317 W 4.7 A 326 W 4.5 A 326 W
24 in.
(610 mm) 1/3 hp 1300 38 lb (17.2 kg) 5.4 A 348 W 4.8 A 334 W 4.8 A 351 W
30 in.
(762 mm) 1/3 hp 1300 45 lb (20.4 kg) 5.3 A 335 W 4.9 A 345 W 4.7 A 347 W
*Includes fan motor, blades, and cage assembly.
Fan Size Motor
Size
Max RPM
@ 115 V
Fan
Weight*
220 V 235 V 240 V
Current Power Current Power Current Power
20 in.
(508 mm) 1/3 hp 1300 32 lb (14.5 kg) 3.0 A 394 W 3.1 A 389 W 3.2 A 376 W
24 in.
(610 mm) 1/3 hp 1300 38 lb (17.2 kg) 3.1 A 380 W 3.0 A 393 W 3.1 A 393 W
30 in.
(762 mm) 1/3 hp 1300 45 lb (20.4 kg) 3.0 A 364 W 3.0 A 379 W 3.0 A 380 W
CAUTION: To reduce risk of personal injury, use only with mounting assembly models 007180, 007262,
009182, 007265, and 008001 manufactured by Big Fans.
AirEye 100–120 VAC, 1Ф, 50/60 Hz
AirEye 200–240 VAC, 1Ф, 50/60 Hz
*Includes fan motor, blades, and cage assembly.

1. MOTOR
Make sure fan mount has been installed as specified in the mounting instructions.
To adjust motor angle, loosen main mounting bolt and angle adjustment bolt.
30 ft·lb (40.7 N·m)
7 ft·lb (9.5 N·m)
1/2-13 x 1-1/2" Main Mounting Bolt
1/4-20 x 1-1/4" Angle Adjustment Bolt
1/2" Lock Washer
1/2-13 Nut
1/4" Flat Washer
1/4-20 Nylock Nut
PARTS AND HARDWARE
Angle Adjustment
Hardware
(4) Flange
Nuts**
*Pre-mounted to blade assembly.
**Pre-mounted to motor thru-bolts.
***Install if included.
****Not included for all regions. Install if included.
Safety cable not shown.
(4) Keyhole
Mounting Slots
Blade Assembly
(2) Set
Screws*
(4) Safety Hinge Pins
Front Guard
Main Mounting
Hardware
Harmonics Filter****
Hinge Pin Eyelets
(4) Motor Thru-
Bolts
Rear Guard
Blade Assembly
Retainer***

2. REAR GUARD
Align Mounting Slots
Secure Guard
2.5 ft·lb (3.4 N·m)

3. BLADE ASSEMBLY
Ensure blade assembly is fully seated onto shoulder of shaft and set screws are aligned to flats of shaft.
5/32"
(4 mm)
20 ft·lb (27.1 N·m)
Install if included.

4. FRONT GUARD
Align Eyelets
Fasten Hinge Pins
Start with topmost hinge.

6. HARMONICS FILTER (SELECT REGIONS ONLY)
Install if included with your fan.
5. SAFETY CABLE
Do not attach safety cable to fan mount under any circumstances.

ELECTRICAL CONNECTIONS: FAN WITH OCCUPANCY SENSOR
ELECTRICAL CONNECTIONS: FAN ONLY
Power Cord
Controller or Automation
and Multi-Fan Kit
Power Cord
Controller or Automation
and Multi-Fan Kit
Occupancy
Sensor

© 2020 DELTA T LLC ALL RIGHTS RESERVED.
AIE-INST-321-ENG-01 REV A 07/02/2020
Conforms to UL 507: Electric Fans
Certified to CSA C22.2 No. 113: Fans & Ventilators
ELECTRICAL CONNECTIONS: FAN WITH OCCUPANCY SENSOR AND HARMONICS FILTER
ELECTRICAL CONNECTIONS: FAN WITH HARMONICS FILTER
Power Cord
Controller or Automation
and Multi-Fan Kit
Harmonics Filter
Controller or Automation
and Multi-Fan Kit
Power Cord
Harmonics Filter
Occupancy
Sensor