Suntec Wellness CoolBreeze 12000 TV User manual

CoolBreeze 12000 TV
Operation Manual

READ AND SAVE THESE INSTRUCTIONS
WARNING! To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device. To reduce
the risk of fire or electrical shock, do not expose to water or rain.
Caution: read and follow all instructions before operating fan. Do not use fan if any part is damaged or missing.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
 READ ALL INSTRUCTIONS BEFORE USING
 Use fan only for intended use, as described in instruction manual.
 To protect against electrical shock, do not immerse unit, plug, or cord in water or spray with liquids.
 Close supervision is necessary when any appliance is used by or near children.
 Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and
before cleaning.
 Never insert fingers, pencils or any other objects through the grille when fan is running.
 Disconnect fan before cleaning.
 Make sure fan is on a stable surface when operating to avoid chance of overturning.
 Do not use the fan in a window. Rain may cause an electrical hazard.
 Do not operate in the presence of explosive and/or flammable fumes.
 Do not place fan or any parts near an open flame, cooking or other heating appliances.
 Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been dropped or
damaged in any manner.
 Do not let cord hang over table or counter or touch hot surfaces.
 To disconnect, grip plug and pull from wall outlet. Never yank on cord.
 Always use on a dry surface.
 This product is intended for household use only and not for commercial or industrial use.
 Do not use fan near curtains, plants, window treatments, etc.
 This appliance is not intended for use by the persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
POWER CORD SAFETY TIPS
1. Never pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance
should be serviced and the power cord replaced. Please return it to our Service Department or to an authorized service
representative.
5. Never wrap the cord tightly around the appliance, as this could cause the appliance to fray and break.
DO NOT OPERATE APPLIANCE IF THE POWER CORD SHOWS ANY DAMAGE, OR WORKS INTERMITTENTLY AND
STOPS WORKING.
IMPORTANT: During the first few minutes of initial use, a slight odor may be noticeable. This is normal and will quickly
disappear.
※RATING: 230V~ 50Hz 38W
※BEFORE USING THIS PRODUCT，PLEASE CAREFULLY READ SAVE OPERATION MANUAL.
NAMES OF ALL PARTS
1. Button;
2. Head cover;
3. LCD display;
4. back enclosure;
5. Grille;
6. Front enclosure;
7. Stand column;
8. Base;
9. Remote controller;

ASSEMBLY METHOD:
1. Take out the base from the packing,Assemble the base together
2. Pass the power cord through the assembled base. And install the base to the stand column with the 4 butterfly screw.
3. See the following picture ,put the power cord in the hook.
Operation method:
LCD display:
Remote control:
: Nature wind
: Oscillation
: Sleeping wind
: Power
:Speed
;Timer
:Oscillation
:Nature wind and sleeping wind selection

Button:
1. Power: plug in the plug, and press , the fan will work in “ middle” speed. The light of the power and speed will
illuminate, the LCD will display the related status, and press again, the appliance will stop working, and all lights are
shut up.
2. Speed: When the appliance is working press this button you can select your desired wind’s speed , it have 3 speeds
(low , middle , and high), the LCD will display the related status.
3. Osc: Press this button, you can set the oscillation function, the light of button will illuminate, the LCD will
display the related status, press it again , the appliance will stop oscillation , the related light will shut up.

4. Timer: Press this button, you can set your desired time(1.2.4.8), and the button of it will illuminate, the LCD will
display the relate the status.
5. Nature wind and sleeping wind selection: Press this button , you can select Nature wind or Sleeping wind , the LCD
will display the related status.
About the remote control:
1. when you use the remote control for the first time, Pull out the insulation pad which is located in the back of the remote.
2. the remote control works within 5m,, if the remote does not face to the appliance’s signal receiver, the distance will be
short. So the remote should be face to the signal receiver.
3. Do not put anything between the remote and the signal receiver.
4. if you use the appliance in the room which have some high power appliance is working , the remote maybe not working.
5. when you do not use the appliance for a long time please take out the battery.
6. changing the battery as following picture.
7. after you use the remote control you can store it in the storage which is back of the products.
NOTE:
1. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
2. The product is for household use only.

CARE AND CLEANING
This appliance requires little maintenance and contains no user serviceable parts. Do not try to fix it yourself. Refer it to qualified
service personnel if servicing is needed.
The fan is permanently lubricated and will not require additional lubrication for the life of the fan.
TO CLEAN: Before cleaning, turn fan off and unplug from electrical outlet. Wipe off excess dust with a lint-free cloth. To ensure
adequate air circulation to the motor, keep vents located at the rear of the motor housing free from dust accumulation. A vacuum
cleaner hose can be used to clean these vents. Do not immerse fan in water or any other liquid.
TO STORE: Make sure to disassemble and clean the fan before storing. Retain the original packaging for the purpose of storing
the fan. Always store fan in a dry place. Never store it while it is still plugged in. Never wrap the cord tightly around the fan, and
do not put any stress on the cord where it enters the fan housing, as it could cause the cord to fray and break.
when you store the appliance please take out the battery from the remote control.
NOTE CONCERNING PROTECTION OF ENVIRONMENT
This product must not be disposed of via normal household waste after its service life, but must be taken to a
collection station for the recycling of electrical and electronic devices. The symbol on the product, the
operating instructions or the packaging indicate such disposal procedures. The materials are recycable in
accordance with their respective symbols. By means of re-use, material recycling or any other form of
recycling old appliances you are making an important contribution to the protection of our environment. Please
ask your local council where your nearest disposal station is located.
© 2011 KLIMATRONIC
®
CoolBreeze
SUNTEC WELLNESS GMBH / HOLZSTRASSE 2 / 40 221 DÜSSELDORF / DEUTSCHLAND