BigTimeClocks XL-44R User manual
!
Page of 21
MODEL # XL-44R
2020 USER’S MANUAL
BIGTIMECLOCKS
•Use remote control keys to select function.(Clock mode, alarm setting, rotating display mode, temperature
setting).
1. GENERAL
®
•PRESS CLOCK in any display to show time.
•PRESS Display to show date, time and temperature in a rotating sequence.
•Press MUTE to turn the remote control key tone “on” or “off”. If there is a beep, sound is turned on.If there is
no sound, sound is muted.
•PRESS to set alarms. The first two digits will flash. You can set up to 16 alarms.
•Enter the alarm group to be set (1 to 16), then press to save data.
•PRESS, the start/stop button to activate or turn off an alarm (if “off” the display will show “- -”)
•PRESS again to enter the alarm time setting. PRESS to switch from hours to minutes and once
more to save data.
•PRESS Start/Stop to select the alarm buzzing duration: 15s,30s or 60s. The alarm will then self-shut.
•PRESS once more to exit and save your settings.
•PRESS Start/Stop to select a rotating display mode (time, date, temperature) or a fixed time display mode.
4. ALARM / TIME BREAKS
5. ROTATING DISPLAY
•PRESS in clock display mode to set year, press once more to set the date and once more to set the
time
•PRESS once more to exit and save your settings.
2. DATE & TIME
!
Page of 22
PRESS F/C to change from Fahrenheit to Celsius temperature values.
10. REMOTE
•Press Brightness key to choose one of six brightness levels
9. BRIGHTNESS
6. TEMPERATURE
7. 12/ 24hrs DISPLAY
PRESS AM/PM-12/24 to change the time display from 24hrs to 12hrs (am / pm) and vice versa. In 12-hour
mode an AM/PM LED indicator will turn on (this light is off in 24 hour mode).
8. KEYPAD
•Use the numerical keypad when setting all values.
• Press the "0" key in time display mode to turn on an hourly alarm. A light indicator will turn on when the
function is activated. The hourly alarm is automatically set between 7:00am and 9:00pm only.
Table of contents
