Bilt Trinity TBFZ-0906 User manual

OWNER’S MANUAL
TRINITY 5-TIER NSF 36" x 18" x 72"
WIRE SHELVING RACK w/WHEELS
Model # TBFZ-0906 / TBFPBK-0906
Important / Important / Importante
DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE| DESCARGUE LAAPLICACIÓN GRATUITA
Directives intelligentes
Instrucciones Inteligentes
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D

Your TRINITY 5-Tier NSF Wire Shelving Rack w/Wheels should include the following parts. Please
inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
You will NOT need additional tools for assembly.
PARTS LIST
BOTTOM POLE (4)
Threaded Insert (4)
is pre-installed
SLIP SLEEVE
(44) + (4) extra
CASTER (w/wrench)
(2 locking, 2 non-locking)
For mobile option
FEET LEVELER (4)
For stationary option
TOP POLE (4)
End Cap (4) and
Pole Connector
are pre-installed
SHELF (5)
SIDEBAR (1)
(Accessory) “S” HOOK (6)
(Accessory)
© 2020 TRINITY - 800.985.5506
1
ABC D
EFGH
Note: The black circular plastic spacers in between Shelves are used only for packaging
purposes. They are NOT needed. Please discard.

A (4)
© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
STEP 2: SLIP SLEEVES
Screw each FEET LEVELER (F) into the bottom of
each BOTTOM POLE (A). Turn clockwise to screw
in place.
STEP 1: Mobile Option
Screw each CASTER (E) into the bottom of each
BOTTOM POLE (A). Turn clockwise to screw in
place. Make sure the Locking Casters are on the
same side.
Use the provided caster wrench to tighten
completely. Failure to do as instructed could
result in the caster stem breaking.
For easiest assembly, do not attach the TOP (B) and
BOTTOM (A) POLES until instructed. Once connected,
these will be the posts for the Rack.
Note that each POLE (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on the POLE (A+B).
On the BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D)
at the desired level. Please make sure the arrow faces up
and that the word “TOP” is right side up. Do this for each
BOTTOM POLE (A) and make sure that the heights are
identical for BOTTOM POLE (A).
Slide the pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto the BOTTOM POLE (A). DO
NOT place more than one pair on each POLE (A) at a time.
STEP 1: Stationary Option
A (4) D (8)
* For safety and stability, the lowest SHELF (C) should be lower than the 3rd notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES (D)—this is normal.
E (4) F (4)

© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
3
STEP 3: INSTALLING BOTTOM SHELF
Place SHELF (C) on its side and slide the (4) BOTTOM POLES (A)
through the holes in the SHELF (C). Make sure that the SHELF
(C) corner cylinders are positioned over the SLIP SLEEVES (D).
Stand the unit upright.
*Note: The level side of the SHELF (C) is the TOP side (the
TRINITY logo on the corner cylinders should be right-side up.)
**Use a rubber mallet, if needed, to secure the SHELF (C).
***For convenience, place BOTTOM POLES (A) with Locking
Casters on the long side of the shelf if the rack will be pushed
against a wall OR if the rack is frequently rolled around like a
cart place BOTTOM POLES (A) with Locking Casters on the side
being pushed or pulled.
C (1)
STEP 4: INSTALLING SHELVES
On POLE (A), place 1 pair of SLIP SLEEVES (E) at the desired
distance between SHELVES (C). Please make sure the arrow
faces up and that the word “TOP” is right side up. Do this for
each POLE (A), and make sure that the heights are identical
for each POLE (A).
Lower SHELF (C) over the BOTTOM POLES (A) so that the
corner cylinders of the SHELF (C) are positioned over the SLIP
SLEEVES (D).
If SIDEBAR (G) placement is desired between SHELVES (C),
please skip to STEP 7 to complete the SIDEBAR (G)
installation before continuing
Repeat Step 4 to install other SHELVES (C) as desired.
**Use a rubber mallet, if needed, to secure the SHELVES (C).
D (8) C (1)

ASSEMBLY INSTRUCTIONS
© 2020 TRINITY - 800.985.5506 4
Screw the TOP POLE (B) into the BOTTOM
POLE (A). The tops of these poles are
indicated by the BLACK END CAP.
STEP 5: INSTALLING TOP POLES
B (4)
STEP 6: INSTALLING SHELVES
On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired
distance between SHELVES (C). Please make sure the arrow
faces up and that the word “TOP” is right side up. Do this for
each POLE (A+B), and make sure that the heights are
identical for each POLE (A+B).
Lower SHELF (C) over the TOP POLES (B) so that the corner
cylinders of the SHELF (C) are positioned over the SLIP
SLEEVES (D).
If SIDEBAR (G) placement is desired between SHELVES (C),
please skip to STEP 7 to complete the SIDEBAR (G)
installation before continuing
Repeat Step 6 to install other SHELVES (C) as desired.
**Use a rubber mallet, if needed, to secure the SHELVES (C).
D (24) C (3)

5© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
Attach 2 pairs of SLIP SLEEVES (D) at the desired level
on 2 POLES (A+B). Make sure that the heights are
identical for both POLES (A+B).
Slide in the SIDEBAR (G) so that the cylinders of
the SIDEBAR (G) are positioned over the SLIP SLEEVES
(D). Attach “S” HOOKS (H) either to the
SIDEBAR (G) or anywhere else on the sides of
any SHELF (C).
STEP 7: INSTALLING SIDEBAR & HOOKS (OPTIONAL)
G (1) H (6)D (4)

© 2020 TRINITY - 800.985.5506 6
TRINITY Customer Service provides the following replacement parts:
SERVICE PARTS LIST –TBFZ-0906 Chrome Color
Part Number Description Part Number Description
1) ZSV-03-007-3618 Shelf 7) XBK-98-003-2538 Feet Leveler
2) XBK-01-011-2543 Slip Sleeve 8) XXX-97-002-0001 Wrench
3) ZSV-04-006-3600 Top Pole 9) ZSV-99-008-4010 Locking Caster
4) ZSV-01-013-2523 Pole Connector 10) ZSV-02-008-0001 “S” Hook
5) ZSV-04-008-3600 Bottom Pole 11) ZSV-02-007-0006 Sidebar
6) ZSV-99-007-4010 Non-locking Caster 12) XBK-23-004-2517 Endcap
2
1
3
4
5
6
87
10
11
9
12

© 2020 TRINITY - 800.985.5506
7
TRINITY Customer Service provides the following replacement parts:
SERVICE PARTS LIST –TBFPBK-0906 Black Color
Part Number Description Part Number Description
1) PBK-03-007-3618 Shelf 7) XBK-98-003-2538 Feet Leveler
2) XBK-01-012-2543 Slip Sleeve 8) XXX-97-002-0001 Wrench
3) PBK-04-006-3600 Top Pole 9) ZSV-99-008-4010 Locking Caster
4) ZSV-01-013-2523 Pole Connector 10) PBK-02-008-0001 “S” Hook
5) PBK-04-008-3600 Bottom Pole 11) PBK-02-007-0006 Sidebar
6) ZSV-99-007-4010 Non-locking Caster 12) XBK-23-004-2517 Endcap
2
1
3
4
5
6
87
10
11
9
12

© 2020 TRINITY - 800.985.5506 8
WARNINGS
Weight capacity per Shelf on Feet Levelers 800 lb (evenly distributed)
Weight capacity per Shelf on Casters 160 lb (evenly distributed)
Total weight capacity of Shelving Rack
(evenly distributed)
800 lb (on Casters)
4000 lb (on Feet Levelers)
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•This item is not recommended for outdoor use.
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed
could result in the caster stem breaking thereby causing the shelving rack to collapse.
3. The warnings, cautions, and instructions discussed in this manual cannot cover all possible
conditions or situations that may occur. The user must always be aware of their environment
and ensure that they use the product in a safe and responsible manner.
4. Do NOT modify the product in any way. Unauthorized modification may impair the function
and/or safety of the product, and may affect the life of the product. Any modifications will void
product warranty.
5. Check for damaged parts.Before using this product, carefully check that all parts are in good
condition, and that the product will operate properly and perform its intended function. Check
for damaged parts and any other conditions that may affect the operation of this product.
Replace damaged or worn parts, and never use this product with a damaged part.
6. Do NOT overload the product.
7. Do NOT roll the product on an uneven surface. Only move the product on a smooth surface.
Rolling over rough or uneven surface may cause casters to break or items on the product to fall,
resulting in injury and / or damage.
8. Do NOT allow children to climb or play around the product. Tipping may occur causing injury.
9. Load the product evenly and place the heaviest items on the lower shelves.

© 2020 TRINITY - 800.985.5506
9
Thank you for purchasing a TRINITY 5-Tier NSF Wire Shelving Rack w/Wheels. In order to
register your product and receive streamlined customer service, please fill out the following
Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product
Registration Form online at www.trinityii.com or (3) scan and email the form to
[e-mail]. Include a copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION

1 YEAR LIMITED WARRANTY
TRINITY 5-Tier NSF Wire Shelving Rack w/Wheels
Model # TBFZ-0906 / TBFPBK-0906
Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the
TRINITY 5-Tier NSF Wire Shelving Rack w/Wheels(“Product”) that each Product shall be free from defects in
workmanship and materials for a period of 1 year from the date of original purchase. Trinity’s obligation
under this warranty shall be limited to repair or replacement of, or adequate compensation for the Product
which shall not be greater than the amount of the purchase price of the Product, at the option of Trinity,
during the warranty period. All replaced parts and Products become the property of Trinity and must be
returned to Trinity.
This warranty excludes normal wear and tear of the Product and its parts or components, and damage arising
from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or
alteration by any one other than Trinity. The warranty period of 1 year shall not be extended or renewed by
the repair or replacement of, or compensation for, the Product. Any warranty implied by applicable law is
limited in duration to one year from the date of purchase and is subject to the same conditions and
limitations as is provided for our express warranty.
Except as set forth herein, and to the extent of applicable there are no warranties on this Product either
express or implied, and Trinity disclaims all warranties including, but not limited to, any implied warranties of
merchantability, infringement or fitness for a particular purpose. No warranty or guarantee given by any
person, firm, or corporation with respect to this product shall be binding on Trinity.
If your Product is defective or otherwise requires service or parts, please call TRINITY Customer Service toll-
free at [phone], between 5:00 a.m. and 5:00 p.m., PST. Please tell us which model you purchased,
the date of the purchase, and the problem with your Product. A copy of your original purchase receipt must
accompany your service request.
LIMITATION OF REMEDIES AND LIABILITY
Trinity (and its employees, officers, members, managers, affiliates and assigns) shall not be liable for any
incidental, consequential, special, indirect, remote, special or punitive damages for breach of any warranty,
express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and
attorneys’ fees, which arise out of the purchase, use or inability to use the Product, whether arising out of
contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As
noted above, to the extent damages are allowed by our express warranty or by applicable law, those
damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser
assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others
and their property arising out of the use, misuse, or inability to use this Product. This limited warranty shall
not extend to anyone other than the original purchaser of this product, is nontransferable and states your
exclusive remedy.
Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive
damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
© 2020 TRINITY - 800.985.5506 10

TRINITY Customer Service
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
Monday through Friday
5:00 AM –5:00 PM (PST)
www.trinityii.com
QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
Please feel free to contact us. There are no questions too small, or
any problems too big. We’re committed to providing our customers
with the highest level of service.
CONTACT US