birddog X120 User manual

October 2023
USER GUIDE
X120

Table of Contents
Welcome to BirdDog! .................................................................................................3
Using This Manual........................................................................................................3
First Step ......................................................................................................................... 3
BirdDog X120 Overview............................................................................................4
Welcome to the Future .............................................................................................5
What’s in the Box? .......................................................................................................6
Optional Accessories .................................................................................................6
Quick Start Guide........................................................................................................ 7
Basic Connections.......................................................................................................................7
Power Up........................................................................................................................................ 7
Computer, say hello to the X120 ..........................................................................................7
Basic Conguration....................................................................................................................8
Camera Connections................................................................................................. 12
Remote Controller...................................................................................................... 14
Using the IR Controller ............................................................................................................ 15
Using Presets............................................................................................................................... 17
Powering the X120 .................................................................................................... 20
Video Output .............................................................................................................. 20
Using the Camera Menus.........................................................................................21
Camera Menus............................................................................................................. 21
White Balance Menu ............................................................................................................... 22
Picture Menu.............................................................................................................................. 22
Lens Menu ....................................................................................................................................23
Pan Tilt Zoom Menu................................................................................................................. 24
System Menu.............................................................................................................................. 24
Status Menu................................................................................................................................ 25
Web Conguration Panel ........................................................................................26
Password Management.......................................................................................................... 26

BirdUI Layout................................................................................................................27
Dashboard .................................................................................................................... 28
Network..........................................................................................................................29
NDI Network Settings.............................................................................................................. 31
System.............................................................................................................................32
System Update.......................................................................................................................... 32
Access Manager Conguration............................................................................................33
UI Mode .........................................................................................................................................33
AV Setup ....................................................................................................................... 34
Encode Settings ........................................................................................................................ 34
Cam Control..................................................................................................................36
Preset Tab.....................................................................................................................................37
Exposure Tab...............................................................................................................................37
White Balance Tab ....................................................................................................................38
Picture Tab ...................................................................................................................................38
Colour Matrix Tab......................................................................................................................39
Advanced..................................................................................................................................... 40
Receiving NDI® Video...............................................................................................41
NDI® Camera Control .............................................................................................. 42
IP Connection............................................................................................................................. 42
Remote Controller..................................................................................................... 42
Controlling Your Camera Via Other Protocols ............................................... 43
Camera Initial Setting Status Information....................................................................... 43
VISCA over IP Control............................................................................................................. 44
Setting the DIP Switch............................................................................................................ 45
Using RS-232 (VISCA)............................................................................................................. 47
Using RS422(VISCA) / RS485 (PELCO P/D)................................................................... 49
PELCO P/D Keyboard RS485 Connection.......................................................................52
Operating Multiple Cameras using RS-232 and 422/485..........................................55
Camera Dimensions ...................................................................................................56
Glossary..........................................................................................................................57

1
Copyright
Copyright 2023 BirdDog Australia all rights reserved. No part of this manual may be copied, reproduced, translated,
or distributed in any form or by any means without prior consent in writing from our company.
Trademark Acknowledgement
and other BirdDog trademarks and logos are the property of BirdDog Australia. Other trademarks,
company names and product names contained in this manual are the property of their respective owners.
•Microsoft, Windows, ActiveX, and Internet Explorer are registered trademarks of Microsoft Corporation
in the U.S. and/or other countries.
•HDMI, the HDMI logo and High-Denition Multimedia Interface are the trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and other countries.
•Other trademarks, company names and product names contained in this manual are the property of
their respective owners.
•NDI® is a registered trademark of NewTek, Inc.
Important Information
Legal Notice
To ensure account security, please change the password after your rst login. You are recommended to set a
strong password (no less than eight characters).
The contents of this document are subject to change without prior notice. Updates will be added to the new
version of this manual. We will readily improve or update the products or procedures described in the manual.
Best eort has been made to verify the integrity and correctness of the contents in this document, but no statement,
information, or recommendation in this manual shall constitute formal guarantee of any kind, expressed or implied.
We shall not be held responsible for any technical or typographical errors in this manual.
The product appearance shown in this manual is for reference only and may be dierent from the actual appearance
of your device. Due to uncertainties such as physical environment, discrepancy may exist between the actual
values and reference values provided in this manual.
Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Warnings
•If the product does not work properly, please contact your dealer. Never attempt to disassemble the
camera yourself. (We will not assume any responsibility for problems caused by unauthorized repair
or maintenance.)
•This installation should be made by a qualied service person and should conform to all the local codes.
•When shipping, the camera should be packed in its original packaging.
•Ensure the power supply voltage is correct before using the camera.
•Do not drop the camera or subject it to physical shock.
•If the camera will not be used for an extended period of time, attach the lens cap to protect the lens.
•Do not aim the camera lens directly at the sun. This may cause irreversible damage to the camera.

2
Maintenance Precautions
•If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a rubber
dust blowing ball.
•If there is grease or a dust stain on the front glass surface, clean the glass surface gently from the
center outward using anti-static gloves or an oil-free cloth. If the grease or the stain still cannot be
removed, use anti-static gloves or an oil-free cloth dipped with detergent and clean the glass surface
gently until it is removed.
•Do not use organic solvents, such as benzene or ethanol when cleaning the front glass surface.
Regulatory Compliance
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential/commercial installation/environment.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
•This device may not cause interference.
•This device must accept any interference, including interference that may cause undesired operation
of the device.
•This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with 20 cm between the radiation and your body.
• IC 5150-5250 MHz restricted to indoor use only statement.
• Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC.

3
Welcome to BirdDog!
Thank you for purchasing your X120 camera. If you have any questions regarding the camera, please contact your
authorized dealer.
Our website also has a User Stories page to help inspire you to get the most out of your camera.
Using This Manual
Your X120 is a powerful and sophisticated device, so please read this manual before use and retain for future
reference.
If you are new to the world of NDI® or BirdDog cameras, begin with the Quick Start Guide. This will give you a good
introduction to the setup of your new camera.
Tip
When viewing the diagrams in this manual, use the zoom controls in your browser or PDF reader to reveal more
detail.
First Step
Firmware Upgrade
Before you use your new X120, it’s a good idea to upgrade to the lastest rmware. We are always adding new
features and improving the performance of our products, so installing the latest rmware will provide you with the
best user experience.
To upgrade the rmware, please follow the Firmware Upgrade Instructions located in your rmware download
folder and perform upgrade process.
The latest rmware les are available for download here: Firmware Updates
We’re Invested In Your Success
We pride ourselves on being approachable and easily contactable. We’d love to hear from you.
Dan Miall
Co-Founder and CEO
dan@bird-dog.tv

4
BirdDog X120 Overview
Core Features
The X120 is the world’s rst NDI® HX Wi-Fi Production PTZ. Features are as follows:
•Resolution: Up to 1080P60.
•Lens: 5.2-104mm, 49mm lter ring.
•Zoom: Optical 20X Digital: 16X.
•Shutter Speed: 1/1 – 1/10,000 sec.
•Video Format Support: 1080p 60, 59.94, 50, 29.97, 25; 720p 60, 59.94, 50, 29.97, 25.
•Video Output: NDI® HX2 and HX3, 3G - SDI, HDMI and USB-C (UVC/UAC)
•Power: DC 12V, PoE+(IEEE802.3at).
•Network Interface: WiFi 5, 1GbE.
•PTZ: ±350-degree continuous pan, ±120-degree continuous tilt.
•Bi-colour full 360 degree viewable Mohawk Tally display.
•Rear camera illuminated numbering system.
•Onboard OLED display: 5-line, RGB color.
•128 presets, Speed up to 150 degrees/sec.
•Standard mounting and ceiling mounting with E-Flip function.
•Control protocols include RS-232 control, RS-422/485 control, VISCA-over-IP, NDI® Control, IR
Remote Controller.
•Presets store camera directions and image parameters. (Up to 6 presets on remote controller or 128
presets via protocol programming).
•Image parameter setting restore with presets and quick access operation.

5
Welcome to the Future
What is NDI®?
Your new X120 camera has been designed to support the cutting edge NDI® video transmission standard.
NDI® (Network Device Interface) is a high-quality, low-latency, frame-accurate standard that enables compatible
devices to communicate, deliver, and receive high denition video over your existing Gigabit Ethernet network.
Operating bi-directionally, NDI® devices can be auto-detected, powered and controlled over the same Ethernet
cable used to send the video and audio. If you have a Gigabit network, you have the potential for a streamlined,
interconnected, video production environment.
With the introduction of NDI® 5, you can now securely share network sources between remote sites anywhere in
the world - on a single network port. Even a smartphone can be a NDI® source.
Transitioning to NDI® can also occur gradually. Existing SDI or HDMI signals can easily be converted to an NDI®
stream and piped where required on your network and converted back only at the neccessary endpoints.
BirdDog has been on the NDI® journey since the very beginning, and your new NDI® HX Wi-Fi capable X120 is just
one of our products designed to take advantage of the features and potential of NDI®.
For more information on NDI®, please refer to this page on our website.

6
What’s in the Box?
NOTE: There are three models of X120 camera with dierent color scheme and features.
Optional Accessories
Depending on your requirements, you may need to purchase these optional accessories. Please browse to this
page on our website for all your accessory needs.
1 x BirdDog X120
1 x IR Remote Controller
(3V CR2032 Coin Lithium Battery Required)
1 x camera Power Adaptor
1 x bag of Camera Mounting Screws and Tally
Light Number Inserts
1 x USB to 3.5mm Audio Cable
RS232 8 pin mini DIN to Phoenix terminal block
Wall Mount
Ceiling Mount
RJ45 to RS422 adaptor cable

7
Quick Start Guide
If you are new to the world of NDI® or BirdDog cameras, please follow this quick start guide to become familar with
the basic setup of your new camera. You can also view a similar online video.
Be sure to check the many helpful product videos on our YouTube page.
Basic Connections
Power
To start using your new camera, you’ll have to decide how you are going to power the device. You have two choices.
You can use PoE+ (Power over Ethernet) or, if your network doesn’t support PoE+, you can use the included 12VDC
power adaptor. If available, PoE is the easier choice, since you can use the same Ethernet cable to power and control
the camera, as well as send the video. For the purposes of this quick start guide, we’ll use the power adaptor, so
plug the jack into the 12VDC power port on the back of the camera.
Network
Since we’re supplying power via the adaptor, the NDI®/PoE Ethernet connection will be used purely for NDI®
video. Let's keep things simple and plug an Ethernet cable directly from your computer into the camera NDI®/PoE
Ethernet port.
Power Up
Once you’ve made the power and Ethernet connections, turn on the adapter power. When rst powered up, the
camera will perform it’s initialization routine by rotating to the left and then centering again. When this is nished,
the indicator light on the front of the camera will display green (and occassionally amber) and the camera is ready
to be accessed.
Computer, say hello to the X120
Since we're connecting your camera directly to your computer, we need to congure the network settings of your
computer to allow communication with the camera.
Navigate to the Network Properties in your computer preferences and make the following settings.
Select Use the following IP address: and enter an IP address. The default IP address of the camera is 192.168.100.100,
so we need to enter an address where the rst three numbers are the same as the camera IP address, i.e., 192.168.100
but the last number is dierent, in the range of 0 - 255, that is not currently assigned. Usually numbers less than
200 are more likely to be available. The subnet mask can be set as shown.
The X120 and the computer are now congured on the same subnet and should be able to communicate with each
other.

8
Basic Conguration
NDI® Tools
NDI® Tools is a free suite of applications designed to introduce you to the world of IP video and is available here.
Once installed, launch the Studio Monitor (Video Monitor, if using a Mac) application. This simple application allows
you to view all NDI® sources on your network. Right click on the Studio Monitor window to view your camera as
an NDI® source. In the example to the right, three cameras and a desktop computer are shown as NDI® sources.
Tip
By default, the displayed sources have names that include the last ve digits of your
camera MAC address which is displayed on the bottom of the camera.
Clicking on your camera in the source list will display the image from your camera
with the default automatic settings.
The BirdUI
BirdDog cameras have a web interface (BirdUI) that is displayed by your computer brower and can be used to
congure your camera remotely.
1. Click on the gear icon on the bottom right of the Studio Monitor window.
2. In the displayed window, type the default password ‘birddog’ (all lower case) and click the OK button. The
Dashboard window is displayed.
The Dashboard shows important basic camera settings. For now, check that the displayed Status is Active and
take note of the frame rate that is currently output from the camera (displayed under NDI® connection info).
This frame rate should be set identically for all cameras according to the requirements of your production.
Let’s see how to change this and other important camera settings.

9
NDI Encode Settings
Bitrate Management
Because you’re sending NDI® video over your computer network, you may need to be mindful of the amount of
bandwith your video will consume. By setting Bitrate Management to NDI MANAGED, the target bitrate will be set
in accordance with the NDI® standard. This will achieve an optimum balance between bandwith consumption and
video quality. In this mode, the video bitrate will be around 120- 140 Mbps. If you do opt for Manual management,
you may select a target bitrate within a range of 60-360 Mbps. Do this with care, as the actual bitrate may be
greater, straining the capacity of the network and the receiving device, and lower settings may result in reduced
image quality.
NDI Video Format
Here you can set the frame rate of the camera to match that of your production. All cameras should be set to the
same frame rate.
NDI Group
NDI® supports Grouping which allows you to hide the visibility of video sources to viewers that are not part of the
group. If disabled, the video source is public and viewable by any receiver on your network.
Stream Name
Give the output video stream of the camera a memorable name to make identication easier on NDI® receiving
devices.
NDI Audio
You can choose to embed audio from the audio input connector into the NDI® stream or mute it.
NDI Failover Source
If the selected HDMI source is interrupted for any reason, the X120 can automatically switch to a pre-determined
alternative NDI® source. Select an available NDI® source for the failover function from the
Available NDI® sources
dropdown list. Pressing the Refresh button will add new sources to the list, whereas pressing Reset will populate the
list with only active NDI® sources. Click the Apply button to apply your failover source change.

10
Ethernet Network Conguration
For the nal part of this quick start guide, let’s set up the network conguration of your camera so it can work with
your wider network.
Most computer networks provide for both automatic and manual conguration of network devices and the X120
can accomodate both.
Static or DHCP
Here you can set the network conguration to either DHCP (default) or Static. DHCP simplies the management of
IP addresses on networks. No two hosts can have the same IP address, so assigning them manually can potentially
lead to errors. If your network is set up for DHCP, this is generally the best conguration to choose.
If you do choose to go with a Static IP address, you’ll need to add the IP Address, Subnet Mask and Gateway
Address information according to the requirements of your network.
DHCP Timeout, Fallback IP address, Fallback Subnet Mask
You can set the timeout period during which the X120 will look for a DHCP IP address. After this period, the camera
will default to the designated fallback IP address.
This can be useful if you use your camera in other network environments. For example, if a DHCP server is available
in your normal oce or studio application, the camera will use the DHCP supplied IP address. If you then use the
camera in another application without a DHCP server, your camera will always default to the known fallover IP
address.
BirdDog Name
You can give your camera a meaningful name to make identication easier when viewing NDI® sources on a
receiver such as a TriCaster, vMix or Studio Monitor. Be sure to make the name unique, as no two devices on the
network should have the same name. The name can be any combination of 'a-z, 0-9, and –‘.
After renaming your camera, navigate back to the Dashboard and click REBOOT DEVICE. The camera will re-
initialize and you’ll be good to go.
NOTE: Your computer will need to have ‘Bonjour’ services loaded in order to access the unit via it’s user dened
name. Apple devices come pre-installed with Bonjour, while Windows devices need a plugin available from here.

11
Wi-Fi Network Conguration
1. Select the Wi-Fi Network tab.
1. Click the Wi-Fi On button to enable Wi-Fi operation.
2. Select your network.
3. Complete the rest of the Wi-Fi conguration as for Ethernet Network Conguration above.
4. Click the Apply button to save your changes.
You’re Done!
That concludes our quick start guide for the X120. Your camera has many other features, so to get the most out of
your camera, please review the rest of this manual.
To learn about more advanced camera options, such as exposure, white balance and colour management, please
refer to here in this manual.

12
Camera Connections
1. NDI® HX Ethernet Port
For NDI® HX output. Supports PoE+(IEEE802.3at).
2. Wi-Fi Antenna
3. 12V DC Power Port
Connect the supplied DC power adaptor.
4. HDMI Output
5. 3G-SDI Output
6. RS-232/422 Control Port (RJ45)
RJ45 to RS-232/422 convertor cable is provided.
7. USB-C Port
For USB video
8. Wi-Fi Antenna
9. Tally Light
10. Lens
20x zoom lens.
11. Power LED Indicator

13
Turns green when the camera is connected to power outlet. When the power is turned on, it takes about 15
to 30 seconds to display the image after LED turns on. Flashes orange when the camera receives commands
from the infrared remote controller.
12. OLED Display
Displays camera host name, Ethernet IP address and Wi-Fi IP address.
13. Fixed Mounting Holes
For original wall/ceiling mount bracket
14. Tripod mounting holes
15. Base DIP Switch
Used for setting the camera conguration. For details, refer to Setting the DIP Switch.

14
Remote Controller
1. Power
•Power ON the camera to turn the camera in
operation status.
•Power OFF the camera to turn the camera in
standby status.
•When the camera is powered OFF, the camera
turns to the back and would be on standby
mode.
•When the camera is powered ON, the camera
turns to the front.
•Powering the camera ON/OFF would not
restart the camera.
2. Camera IR ID Selector for Remote Control.
3. AI Features, available when AI button (13#) is
pressed. (Not activated).
4. Positioning Function and Number Buttons
•Preset Position Calling and Setting
5. Value adjusting + for Feature Item NO.11.
6. Preset button, to set preset position.
7. Zoom. Telescope and Wide with slow speed.
8. Auto Framing. (Not activated).
9. Direction Control
•PAN-TILT direction control
•OSD menu navigator
•HOME: Home position, conrm button, Enter
button.
10. FOCUS
•Manual Focus, Far, Near
•Auto Focus
11. Features Direct Control, work with Value Adjust key + and – to make the feature adjustments.
•Gain, Image gain adjustments
•Color, Image color saturation adjustments
•Con., Image contrast adjustments
•WB.R, Image White Balance Red adjustments
•PT S., Pan/Tilt Speed adjustments

15
•Zoom S., Zoom Speed adjustments
•Preset S., Preset Speed adjustments
•WB.B, Image White Balance Blue adjustments
•Black L., Image Black Level adjustments
•Freeze, To get a frozen image.
•B Light, Back Light compensation
•OPW, One Push White Balance
12. Video Format Switching, Work under Fn button.
•You can change the video format by keep pressing the button. (When video format is changed, the
camera would restart and the screen turns black for few seconds.)
13. MENU, On screen menu display ON/OFF
14. FN Function Mode key
•Press and hold the Fn key, and press one of the function buttons that printed in color brown.
15. Reset button, to cancel preset that has been set.
16. Zoom. Telescope and Wide with fast speed.
17. One Push AF - Press once to focus.
NOTE Battery not included with remote controller.
Using the IR Controller
Pan/Tilt and Zoom Operation
Panning and Tilting
1. Press the POWER switch.
The camera will turn on and perform the pan/tilt reset operation automatically.
2. Press the arrow button to pan or tilt the camera.
While checking the picture on the screen, press the desired arrow button.
•To move the camera in short increments, press the button just for a moment.
•To move the camera in long increments, press and hold the button.
•To move the camera diagonally, press the “←, →” button while holding down the “↑, ↓” button.
•Restore to starting position, press the HOME button.

16
•If the camera moves in a dierent direction from the one that you intended, be aware that the camera
is set so that the image output from the camera is rotated toward the right whenever you press the "
→” button.
•To face the camera toward the opposite direction:
You might wish to face the camera towards the opposite direction from that of the button you pressed,
for example, when you change the direction of the camera while checking the picture on the screen.
In such a case, press and hold the Fn key, then press the 2 (REV) button.
•To reset the setting, press and hold the Fn key, then press the 1 (STD) button.
NOTE: The above setting only changes the signal emitted from the infrared remote controller, and does not change
the setting of the camera itself. Therefore, repeat the setting for each infrared remote controller if you are using
more than one infrared remote controller.
When the STANDBY lamp is blinking
If the camera is moved forcibly, or a nger or other object interferes with camera movement, the camera may fail
to memorize the pan/tilt position.
Press the PAN-TILT RESET button to reset the pan/tilt position.
Zooming
Button (Slow Zoom) [T] - Zoom-IN and [W] - Zoom-OUT slowly
Button (Fast Zoom) [T] - Zoom-IN and [W] - Zoom-OUT quickly
Operating Multiple Cameras with IR Controller
1. Set the DIP Switch on the rear panel of the camera to the number of camera you want to operate to 1, 2 or 3.
(See DIP Switch setting instruction).
2. Press one of the Camera IR ID button on the IR remote controller, the button will be illuminated, that means the
camera that is set to IR ID Number will respond to the IR controller.
3. Always rstly check if the IR ID is set correctly same as the IR ID set on the camera when the camera is not
responding to the IR controller. Then, you can operate the camera(s) specied by number. Every time you
operate the camera(s) using the IR remote controller, the Camera IR ID button pressed in step 2 ashes.

17
Adjusting the Camera Focus
Focusing on a Subject
Focusing the camera on a subject automatically: Press the AUTO button. The camera focuses on the subject at the
center of the screen automatically.
Focusing the camera on a subject manually: After pressing the MANUAL button, press either the FAR or the NEAR
button to have the camera focus on the subject.
Shooting with Back Lighting: When you shoot a subject with a light source behind it, the subject becomes dark. In
such a case, press the BACK LIGHT button. To cancel the function, press the BACK LIGHT button again.
NOTE The BACK LIGHT function is eective if MODE is set to FULL AUTO in the EXPOSURE menu of thecamera.
Using Presets
Memory (Preset)
Using the preset function, nine sets of camera shooting conditions can be stored and recalled. Nine sets of camera
shooting conditions can be stored and recalled by using remote controller. Up to 128 presets are possible via
protocol programming. This function allows you to achieve the desired status instantly, even without adjusting the
following items each time.
•Pan/Tilt Position
•Zoom Position
•Focus Auto/Manual
•Focus Position
•AE Mode
•Shutter control parameters
•Bright Control
•Iris control parameters
The settings stored using this function are recalled when the power is turned on.
1. Press the PAN-TILT RESET button to reset the pan/ tilt position.
2. Adjust the position, zooming, focusing and backlighting of the camera.
While holding down the PRESET button, press any of the POSITION buttons, 1 to 9, in which you want to store the
settings.
Recalling the stored settings
Press any of the POSITION buttons, [1] to [9], in which you have stored the settings.
Cancelling the preset memory
While holding down the RESET button, press the POSITION button from which you want to cancel the settings.
NOTES:
•When the power is turned on, the camera starts with the settings stored in POSITION 1.
•If you want to retain the previous pan and tilt positions, etc. before the power is turned o and turned
on again, store those positions in POSITION 1.
•When you are storing or cancelling the settings in one POSITION, you cannot call up, store or cancel
the settings in another POSITION.
•When the menu is displayed on the screen, you cannot perform the operation for storing, recalling, or
cancelling the setting. Be sure to return to the normal display before starting these operations.
•Gain control parameters
•Exposure Compensation On/O
•Exposure Level
•Backlight Compensation On/O
•White Balance Mode
•R/B Gain
•Aperture Control
•WD Parameter
Table of contents
Other birddog Digital Camera manuals