Bison 130 User manual

GASOLINE PRESSURE WASHER
Instruction Manual
Please make certain that everyone who uses the
PRESSURE WASHER thoroughly reads and
understands these instructions prior to operation.
W
ARNING

-1-
G150
14.5Mpa 19Mpa 20Mpa 17Mpa
11-13Mpa 15-17Mpa 16-18Mpa 13.5-15Mpa
6.5 L/min 9 L/min 9 L/min 12.6 L/min

-2-
7.Nozzels
Hose Reel
OPTIONAL PARTS

-3-
A
PUMP (FIG11):
If you buy a machine
without a red breathing
plug, please ignore FIG9
PUMP (FIG9):
WARNING:
If you buy a machine with
a red breathing plug, be
sure to remove the yellow
plastic from the plug before
using it
red breathing plug
yellow plastic

-4-

-5-

-6-
FIG. 26

-7-
USING THE JET POLE USING THE TURBO NOZZLE
3

-8-

-9-

-10-
1.
2.
1.
2.
3.
4.
5.

-11-

-12-
Following operations and maintenance will extend the service life of the pump:
1.After using 20 hours of the new machine, pour out the machine oil,
and add the appropriate amount of kerosene.
Operate the pump without load in 10-15 seconds,
then close the machine and pour out the kerosene, finally add the new oil.
2.Accumulative use after 100 hours,
change the oil in the same way like above.

-13-

-14-