BIVROST AX6 User manual
BIVROST AX6 Camera Rig Specs Table
134.5mm x 134.5mm x 134.5mm Rig supports: YI 4K+ Camera/ YI 4K Camera
376g Rig Resolution: 8K
952g Spherical Photo format: RAW format *.dng
Anodized Aluminum YI 4K+ Video Quality: 4000x3008 30fps, h.264
Recommended Camera Settings
Spherical Video Spherical Photo
Resolution: 4K HD 4000x3008
FOV: Wide
Metering Mode: Average
Video Quality: High
WB: Native
Adjust Lens Distortion: OFF
Color: Flat
Shutter: Auto
ISO max: 400
Sharpness: Low
File size: Max
Resolution: 12MP (4000x3000)
Shutter: Auto
Metering mode: Average
WB: native
Color: at
ISO min: 100
ISO max: 400
Sharpness: Low
Time Stamp: OFF
File Format: RAW + JPG
x12
+
x12
edge
holder node
support
lter holder
(only with lter-kit)
x6
x6
x6
x8
4 1
1.5mm
2.5mm
¼”
M3x3
M2x4
M2x12
M3x6
⅜” to ¼”
adapter
¼” x ⅜”
UNC
x60 x12 x24 x1x6
Tools
Parts
BIVROST AX6 Camera Rig
ASSEMBLY MANUAL
Allen keys
Screws
1
1
2
23
3
4
4
Find out more about BIVROST solutions:
Stay updated on products and events:
@bivrost360
WWW.BIVROST360.COM
2 3
1. RIG CAGE CONSTRUCTION 2. CAMERA ESTABLISHING 3. FILTER MOUNTING
(optional step)
5. STAND MOUNTING
Rig can be mounted onto the tripod
4. POSITIONING
M2x4
M3x3
M3x6
M3x6M3x6
M3x6
M2x12M3x3
M2x4
Remove all holders from the rig
Screw the holders to the
edge to attatch the cameras
Rig can be mounted directly
to the ⅜”
Use the adapter to mount
the rig to the ¼”
Holders on the opposite
sides need to be positioned
in a mirrored setup
Doing otherwise makes it
impossible to attach all the holders
to the rig
Check if the holder screws are
not sticking out on the inside of
the holder
Possibility of scratching the camera
Plant the camera carefully into
the holder
Screw the support bolts
loosely
Screw the 1 / 4” bolt into
the camera
Adjust the camera and
tighten the support screws
Carefully adjust the holder
screws to increase the stability
of the camera
Possibility of damaging the camera
⅜” to ¼”
adapter
Stand
¼” x ⅜”
UNC
1
1
2
2
