FujiFilm FinePix S3100 User manual

3
S3100
S3100
/S3500
S3500
FGS-406106-Ni
BL00405-100(1) E
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix S3100/FinePix S3500
You can use this camera to view still images recorded on the FinePix
S3100/FinePix S3500 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card.
a/T(Tele zoom) button
b/W(Wide zoom)
button
DISP (Display)
/ BACK button
MENU/OK button
Low Light
Viewfinder button
Strap mount
Battery cover
d/Macro button
c/ Flash button
DC IN 5V (Power input)
socket
Strap mount
Flash pop-up button
Slot cover
xD-Picture Card slot
VIDEO OUT (Video output) socket
(USB) socket
Indicator lamp
Viewfinder (EVF)
EVF/LCD
(monitor selector)
button
LCD monitor
Tripod mount
Power switch
Playback mode
Photography mode
Power-OFF MOVIE (Video)
Manual
AUTO
Scene position
Mode dial
Flash control
sensor
Flash
Self-timer lamp
Shutter button
Lens
A. Loading the batteries
01
01
0203
1. Check that the camera is turned off (indicator lamp is off)
before opening the battery cover.
2. Load the batteries correctly as shown.
3. Press on the battery cover to push the batteries down.
Slide the cover closed.
1. Align the indicators on the
xD-Picture Card slot and
xD-Picture Card and then
push the card firmly all the
way into the slot.
Close the slot cover.
Press “d” or “c” to select the date order.
3. You can select your
preferred date format.
Press “d” or “c” to select
the date order, Year, Month,
Day, Hour or Minute.
Press “a” or “b” to correct
the setting.
Press the “MENU/OK”
button after you complete
the setting.
*Refer to owner’s manual
for date/time setup.
B. Setting up the camera
2. To turn the camera on, set
the Power switch to “q”.
*A confirmation message
appears. Press the
“MENU/OK” button to go to
DATE/TIME setting screen.
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＮＯＴ ＳＥＴＮＯＴ ＳＥＴ
ＳＥＴＳＥＴ ＮＯＮＯ
2
Indicator
C. Taking pictures
1. Set the Power
switch to “q”.
2. Press the “EVF/LCD” button to
alternate the display between the
viewfinder (EVF) and the LCD monitor.
Press the “EVF/LCD” button to select
the viewfinder (EVF).
D. Viewing pictures
1. Set the Power switch to “w”.
2. Press “c” to scan forward
through your images.
Press “d” to scan
backwards.
1 2
Bebeep
Beep
3. Press the shutter
button down
halfway to adjust
the focus.
4. Press the shutter button down fully to
take a picture. The camera makes a
“Beep” sound and takes the picture.
3 4
01
02
1
02
２００２００４ １ １１ １
１２ ： ００ ＡＭ１２ ： ００ ＡＭ
ＹＹＹＹ ＭＭ ＤＤＹＹＹＹ ＭＭ ＤＤ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬＯＫＯＫ ＢＡＣＫＢＡＣＫ

A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
Viewing images on your PC
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn your PC on and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. “Administrator”).
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click the [Installing FinePixViewer] button.
5. After installation completed, press [Restart] button.
B. Connect the Camera to your PC
1. Load an xD-Picture Card containing photographed images
into your camera.
2. Set the “USB MODE” setting in the “SET-UP” menu to digital
camera “¶”. (Refer to “USING THE SET-UP SCREEN” in
the owner’s manual.)
C. Save Images
1. The Save Image Wizard starts up. Click the [NEXT] button.
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2004_0723 Image
D. View Images
1. Click the [Show List of Images]
button.
2. Select “Preview” in the View menu to display an enlarged
image.
3. Turn your camera off.
4. If you have one, plug the AC power adapter connector into
the “DC IN 5V” socket on the camera and then plug the
adapter itself into the main power outlet, otherwise be sure
your batteries are fresh and charged.
5. Use the USB cable (included) to connect the camera to your
PC.
6. Turn the camera on.
7.
FinePixViewer starts up automatically.
Windows 98/98 SE/Me/2000 Professional
q The “Found New Hardware” help message appears in
the bottom-right corner of your screen. This message will
close when the settings are completed. No action is
required.
w Specify the settings in the “AutoPlay” dialog box.
e Select “Viewing images using FinePixViewer” and then
select the “Always do the selected action” checkbox.
Windows XP
r Click the [OK] button to launch FinePixViewer.
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
(http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
：ＳＥＴ：ＳＥＴ
：ＣＯＮＴ．：ＣＯＮＴ．
ＳＥＴ−ＵＰＳＥＴ−ＵＰ
：ＳＥＴ：ＳＥＴ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＦＲＡＭＥ ＮＯ．ＦＲＡＭＥ ＮＯ．
１ ３
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
２
PC
USB socket
(USB)
socket
DC IN 5V
socket
Camera