BLAU aquaristic Lumina LED User manual

Lumina LED and
Lumina Hybrid
controller 2, 3, 4 Operating LED indicator
2- Aquaristic computer control
3- Manual controller
4- Computer control
2
3
4
RJ12 Port
Connect here an aquaristic computer
Dimming system 1-10v.
Port distribution
1-12V
2-channel1
3-ground
4-free
5-channel 2
6-free
Turn knob with an
screwdriver
2 dimming channels
Get the software Lumina Led Controller at www.blau-aquaristic.com
Connect the light fixture to your computer by USB connector
Turn on the light and open the software
Install the lastest Firmware (Main Menu: Tools)
Program you light fixture with many light effects
Load the program to your light
Disconnect the light from the computer
Enjoy your aquarium!
Step 1:
Select the light fixture
control system pressing
the selection mode button
Mini USB port
To connect computer
for fixture programming
RJ12 Port
quick guide
aquaristic computer
control mode
manual control mode
computer control mode
2012 Barcelona Marine Farm S.L.
BLAU
aquaristic
Manual dimming knobs

Select the latitude and longitude
for your aquarium
Press “fast motion”to see the
24h light effect summarized in
the desired time
Change the “noon” of your
light respect the real time.
In this way you can enjoy
your aquarium when you arrive
at home in the evening.
Select the virtual
deep of your aquarium
with the “deep filter”
At -10m the balance of
the blue and the white is
the same
Intensity filter
You can modify the intensity
of all the channels at the
same time. You can correct the
light value if you think that
is too much low or strong.
Cloudy function.
If you want to give more
realism to your aquarium
light effects, you can select
the “cloudy function”.Every 8
hours the light decides the
next weather taking care of the
the probability that you
choosed.
Storm function
If you need more realism
add the Storm effect. Only
if you have select the Cloudy
function you can add the
possibility of have storms in
your aquarium. The probability
is linked to the Cloudy
probability
.
Use the date system or change
it. You can use too to simulate
the light curve along the year
before to decide the definitive
latitude. Natural Mode
Lumina Led Controller
BLAU
aquaristic
quick guide
Send your program to the light fixture
before disconnecting it of the computer
Dowload the program that the fixture have
currently.
Moon Fases Function
Enable the function and then
choose the first day of Full Moon
2012 Barcelona Marine Farm S.L.

quick guide
Press “fast motion”to see the
24h light effect summarized in
the desired time
Change the “noon” of your
light respect the real time.
In this way you can enjoy
your aquarium when you arrive
at home in the evening.
Intensity filter
You can modify the intensity
of all the channels at the
same time. You can correct the
light value if you think that
is too much lower or strong.
Cloudy function.
If you want to give more
realism to your aquarium
light effects, you can select
the “cloudy function”.Every 8
hours the light decides the
next weather taking care of the
the probability that you
choosed.
Storm function
If you need more realism
add the Storm effect. Only
if you have select the Cloudy
function you can add the
possibility of have storms in
your aquarium. The probability
is linked to the Cloudy
probability
.
Use the date system or change
it. You can use too to simulate
the light curve along the year
before to decide the definitive
latitude. Artificial Mode
Lumina Led Controller
Send your program to the light fixture
before disconnecting it of the computer
Dowload the program that the fixture have
currently.
Press the channel button that
you want to edit and the nodes
of his graph will appear.
Moon Fases Function
Enable the function and then
choose the first day of Full Moon
Edit the 12 nodes of
each 4 channels
to create your optimal
light design
Here you can see or writte
the exactly position of the
currently edited node
BLAU
aquaristic
2012 Barcelona Marine Farm S.L.

quick guide
Test Mode
Lumina Led Controller
BLAU
aquaristic
Press “Control On” to active the Test
Mode
Press “Control Of” to finish the Test
Mode
Moving up and down the sliders
of the 4 Channels you can check
the correct performance and
see the intensity. You can mix
Channels to watch the color
combination.
In the model Lumina Hybrid
(T5 + LED) you can turn on
and turn off the T5 pressing
this button.
Press the small buttons to check
the correct performance of the
green LED function
Here you can see the input
devices. Power position of the
Manual Blue Knobs or if it’s
connected to a external
aquaristic computer
Test Mode will help you to see if all is working correctly.
In this mode you can do color combinations manually that
later you can use for program the fixture.
2012 Barcelona Marine Farm S.L.

quick guide
General View
Lumina Led Controller
BLAU
aquaristic
2012 Barcelona Marine Farm S.L.
File
To Save configurations or use old saved
ones.
Configuration
To configure the program.
First of all enable the different
channels of your light fixture or disable
the freatures that don’t correspond.
Choose the colors that you want for
the channel’s buttons and the
graphic.
Tools.
Download the last firmware of the
program.
With the Status you will know what is going
in your Lumina Led
Program Menu
Test
Check the correct performance
of your light fixture
Programming
Program your light with two modes
Program messages
Programming modes:
Artificial: you can configure all the parameters with
4 different channels
Natural: The program calculates the light intensity
and the daylenght according to the latitude and
longitude desired.
Program status