Blinds To Go Quick Press Wand Operating instructions

Quick Press Wand
Programming Guide
BTG 563866 USEN_1119
We make it easy!

2
Front
Basic Operations of Quick Press Wand
Command Direction
Go to Upper Position Hold UP arrow for 2 seconds
Go to Lower Position Hold DOWN arrow for 2 seconds
Stop shade Press UP or DOWN arrow once
Go to Favorite Position 1 Double tap UP arrow
Go to Favorite Position 2 Double tap DOWN arrow
UP
DOWN
PROGRAM
ChargingPort

3
1.. Setting or Adjusting Shade Limit
A.. Upper Limit
Hold the PROGRAM button for 5 seconds. The motor will move up and down a
short distance and a red light on the motor head will illuminate to indicate the
process to set up the upper limit has started .
See photo below:
Press and release (tap) the UP button once to tell the shade you are setting the
upper limit
Press and hold the UP button to go to the desired upper position. Release at the
upper limit position. If the limit needs to be fine tuned tap the UP/DOWN button
until the desired position is achieved
Press the PROGRAM button once on the back of the wand. The motor will move
up and down a short distance to confirm that the new upper limit has been saved
pressandrelease
Pressandhold
Press1x

4
B.. Lower Limit
Hold the PROGRAM button for 5 seconds. The motor will move up and down a
short distance and a red light on the motor head will illuminate to indicate the
process to set up the upper limit has started .
See photo below:
Press and release (tap) the DOWN button once to tell the shade you are setting
the lower limit
Press and hold the DOWN button to go to the desired lower position. Release at
the lower limit position. If the limit needs to be finetuned tap the UP/DOWN
button until the desired position is achieved
Press the PROGRAM button once on the back of the wand. The motor will move
up and down a short distance to confirm that the new lower limit has been saved
Pressandrelease
Press1x
Pressandhold

5
2.. Setting Favorite Position
The wand motor can store two favorite positions.
A. Setting favorite position 1 :
Using the UP or Down buttons move the shade to your desired favorite
position.
Double tap the PROGRAM button, then double tap the UP button
Please note this process must be completed within 10 seconds
The shade will move up and down a short distance to confirm that the
favorite position 1 was saved
B. Setting favorite position 2 :
Using the UP or Down buttons move the shade to your desired favorite
position.
Double tap the PROGRAM button, then double tap the DOWN button
Please note this process must be completed within 10 seconds
The shade will move up and down a short distance to confirm that the
favorite position 2 was saved
3.. Erasing Limits and Favorite Positions
A. DeletingBoth Limits and Favorite Positions
Double tap the PROGRAM button on the back of the wand. A red light on
the motor head will illuminate to indicate the process of deleting limits has
started

6
Hold the PROGRAM button on the back of the wand for 5 seconds until
the shade moves up and down a short distance
B. Deleting Just the favorite position
Using the UP/DOWN buttons move the shade to the desired favorite position to
delete
Repeat the steps for setting the favorite position in order to delete it
The shade will move up and down a short distance to confirm the favorite
position was deleted
4. Changing direction of Shade
A. Hold the PROGRAM button on the back of the wand for 5 seconds. The shade will
move up and down a short distance to indicate the process has started
B. Hold the PROGRAM button on the back of the wand for 5 seconds again. The shade
will move up and down a short distance again to indicate the shade direction is now
reversed