BLUE ELECTRIC 21386 User manual

MANUAL
360 arbejdslampe/ 360 work light
Manual for:
21386 - 21393
DVA A/S Meterbuen 26-28 2740 Skovlunde

360ARBEDSLAMPE
Sikkerhedsinformation Brugevejledning
Vedligeholdelse
21386 100W 360° LED arbejdslampe
21393 200W 360° LED arbejdslampe
• Tilslut kun arbejdslampen til et 230V udtag med jord.
• Kapslingsklasse IP54 til indendørs og udendørs
anvendelse.
• Bær kun arbejdslampen i håndtaget eller ved at holde
på begge sider af lampens base. Arbejdslampen må ikke
bæres i kablet eller lyttes ved at trække i kablet.
• Stil altid arbejdslampen på et ikke-brændbat underlag.
• Placer ikke lampen, hvor den er i risiko for at blive amt.
• Anvend ikke arbejdslampen, hvis den eller ledningen på
nogen måde er beskadiget.
• Sevice må kun udføres af en autoriseret elektriker.
• Aftør forsigtigt arbejdslampen med en tør klud for at
sikre en god lys- og varmeafgivelse.
• Fold arbejdslampens ben ud, og anvend arbejdslampen
fritstående.
• Vær sikker på, at benene er låst i en af de to faste
positioner.
• Kontroller før brug, at hverken arbejdslampe eller kabel
er beskadiget.
• Tilslut arbejdslampen til en egnet strømkilde.
• Arbejdslampens strømudtag kan anvendes til tilslutning
af el-værktøj og lignede udstyr eller til en eksta
arbejdslampe (maks. 2000W / 16 Amp).
• Vær opmærksom på, at ledningen ikke må udgøre en
risiko på arbejdspladsen.
• Tag ledningen ud af strømkilden, når arbejdslampen ikke
anvendes.
• Forsøg ikke på at åbne arbejdslampen.
Håndtag
Strømudtag Kontakt (tænd/sluk)
Kabelopbevaring
Atnr. Effekt Spænding Specifikationer
21386 100 watt AC220-240V, 50Hz Favetempeatur: 4000K
Kapslingsklasse: IP54
Ledning: 5m H07RN-F 3G1,5mm² VDE
Maks. tilslutning via strømudtaget: 2000W/16Amp
21393 200 watt

Bemærk om botskafelse af dette produkt:
Elektrisk og elektronisk udstyr (EEE) indeholder materialer, komponenter og stofer, der kan være
farlige og skadelige for menneskers sundhed og for miljøet, når afaldet af elektrisk og elektronisk
udstyr (WEEE) ikke botskafes korrekt. Produkter, der er mærket med nedenstående overkydsede
skaldespand’, er elektrisk og elektronisk udstyr. Den kydsede skaldespand symboliserer, at afald af
elektrisk og elektronisk udstyr ikke må botskafes sammen med usoteret husholdningsafald, men
skal indsamles særskilt.
Til dette formål har alle kommuner etableret indsamlingsordninger, hvor afald af elektrisk og
elektronisk udstyr gatis kan aleveres af borgerne på genbrugsstationer eller andre indsamlings-
steder eller hentes direkte fa husholdningerne. Nærmere information skal indhentes hos kommunens
tekniske fovaltning. Brugere af elektrisk og elektronisk udstyr må ikke botskafe afald af elektrisk og
elektronisk udstyr sammen med husholdningsafald. Brugere skal benytte de kommunale indsamlings-
ordninger for at mindske den miljømæssige belastning i forbindelse med botskafelse af afald af
elektrisk og elektronisk udstyr og øge mulighederne for genbrug, genanvendelse og nyttiggørelse af
afald af elektrisk og elektronisk udstyr.
Designation: Blue Electric 360 arbejdslampe
Reference no.: 21386 - 21393
European Directive European Standard No.
2014/35EU
RoHS 2011/65/EU
REACH
EN 60598-1:2015+A1:2018
EN60598-2-4:2018
DECLARATION OF CONFORMITY
We, hereby declare that the following products described below, conforms to the technical
safety rules wich are applicable for the supply to the European Union market.
Import EU:
Above products is conformed to:
Ruben Jørgensen
HSEQ Responsible
30. maj 2022

Ved yderligere spørgsmål eller tvivl, kontakt forhandler eller impotør for mere info:
Impotør:
Flere produkter fa BLUE ELECTRIC
36364 36470 36098 36463
BLUE ELECTRIC er en serie af elektriske produkter designet, testet og godkendt af DVA.
Produkterne fremstilles med fokus på kvalitet, værdi for pengene, miljø og bæredygtighed.
Uanset om det er en arbejdslampe, en varmeblæser eller en kabelrulle er producenterne af
BLUE ELECTRIC nøje udvalgt for at sikre en høj og ensatet kvalitet af hele sotimentet.
DK

360WORK LIGHT
Safety instructions Opeating instructions
Maintenance instructions
21386 100W 360° LED work light
21393 200W 360° LED work light
• Only connect the work light to a 230V eathed socket.
• IP54 ated for indoor and outdoor usage.
• Cary the work light by the handle or by holding the body
of the work light. Do not cary or move the work light by
the cable.
• The work light must be placed on a non-lammable
suface.
• Do not place the work light where it may be accidentally
hit.
• Do not use the work light if it is damaged in any way.
• Sevice must be conducted by an authorrised electrician
only.
• Carefully wipe the work light with a dy cloth to ensure a
good light output and proper heat dissipation.
• Unfold the tripod legs of the work light to use the work
light in freestandig position.
• Make sure that the the tripod legs are locked in one of the
two positions.
• Before use, ensure that the work ligth and and cable are
not damaged in any way.
• Connect the work light to a suitable power supply.
• The outlet socket of the work ligth can be used for
connection of power tools or similar equipment, or for
connection of an exta work ligth (max. 2000W / 16 Amp).
• Be careful that the cord does not cause any risks in the
work place.
• Disconnect the work light from the mains supply after
use.
• Do not attempt to open the work ligth.
Handle
Socket Switch on/off
Cable stoage
Cat. No. Power Power supply Specifications
21386 100 watt AC220-240V, 50Hz Colour Tempeature: 4000K
IP ating: IP54
Power cable: 5m H07RN-F 3G1.5mm² VDE
Socket max. connection: 2000W / 16Amp
21393 200 watt

Correct disposal of this product:
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
Designation: Blue Electric 360 work light
Reference no.: 21386 - 21393
European Directive European Standard No.
2014/35EU
RoHS 2011/65/EU
REACH
EN 60598-1:2015+A1:2018
EN60598-2-4:2018
DECLARATION OF CONFORMITY
We, hereby declare that the following products described below, conforms to the technical
safety rules wich are applicable for the supply to the European Union market.
Import EU:
Above products is conformed to:
Ruben Jørgensen
HSEQ Responsible
30. maj 2022

For futher questions or doubts contact dealer or distributor for more info:
Impotor:
Other products from BLUE ELECTRIC
36364 36470 36098 36463
BLUE ELECTRIC is a series of electrical products designed, tested and approved by DVA.
The products are manufactured with focus on quality, value for money, environment and
sustainability. Whether it is a loodlight, a fan heater or a cable reel, the manufacturers of
BLUE ELECTRIC are carefully selected to ensure a high and consistent quality of the entire ange.
EN

Blue Electric
21386
100
Blue Electric
21393
200
This manual suits for next models
1
Table of contents
Languages:
Other BLUE ELECTRIC Work Light manuals
Popular Work Light manuals by other brands

Mi-Light
Mi-Light FUT105 User instruction

DOMUS LINE
DOMUS LINE X-SIGN installation manual

Opti-Med
Opti-Med JM026-002 user manual

SCANGRIP
SCANGRIP NOVA-UV S quick start guide

General Manufacturing
General Manufacturing SAF-T-LITE 15 Watt Warranty & instruction manual

Ecco
Ecco EW2501 Assembly, installation and operation instructions