Blue Star IA324VNU User manual

IA324VNU, IB324VNU
Images Shown above are for representation purpose only, actual images may differ.

April, 2023

Blue Star Inovation Centre
Next to Vihang inn Hotel,
Kapur Bhvdi,
Ghod Gundar Road, Thane - 400607,
Maharastra.

Anti-Microbial
Filter
Self Clean
(CL Mode)

IA324VNU,
IB324VNU

0
First set 30 C and medium fan speed settings on remote, then press sleep button 7 times in 10 sec
to enter the test mode settings.
No display,
only beep
sound will
come.
IA324VNU,
IB324VNU
IA324VNU,
IB324VNU

Fix & Lock
Press the Fix & Lock button
to adjust cooling capacity as
per the user’s requirement

Press the ECO/CL button
to activate the ECO Mode.
Press the ECO/CL button
to activate the ECO Mode.
Press to switch ON/OFF
IDU Display.

This feature can be enabled by Remote controller
using 'Fix & Lock' key in Cool only. Changing the
mode from Cool/ Energy Save/ Turbo to any other
mode (Dry/Fan/Auto) will exit the 'Fix & Lock'
setting. Using this feature, user can select the
cooling capacity of the unit as per the requirement.
There are total four different cooling capacity steps
in the unit as shown below table:
Set capacity (Tr) will be displayed for 3 sec on the
IDU unit.
FIX & LOCK
SELF CLEAN (CL MODE )
1. Press and hold the ECO/CL button for 3 sec to
select Self Clean mode.
2. IDU display will show "--".
3. Whenever unit is switched OFF by remote, then
fan will keep running at low speed for 5-min todry
out the indoor unit cooling coil and squeeze t h e
moisture out fully before stopping. After 5-min
fan will stop and horizontal louver will close.
4. The unit will switch-off thereafter.
Note: FAN SPEED can’t be change in Self Clean
mode.
COOLING CAPACITY
FIX & LOCK KEY 2.0 TR
C1 1st time Press 1.7 TR
C2 2nd time Press 1.5 TR
C3 3rd time Press 1.2 TR

4. In Auto Mode, user can set temperature range
O O
from 22 C to 26 C only.