Bluedio Bluedio D10 User manual


                                
                  -          -
        s u p p o r t @ u s b i d . c o . i l

V3.O MONO HEADSET BIZ CLASS
User Manual
Overview:
Bluedio D10 is a Bluetooth headset with voice prompts and multipoint connectivity. It allows you to make or
receive handsfree calls in crystal clear quality. Please read this user manual carefully before using the headset.
You might also need to read the manual of your phone, which provides important information of operation and
safety.
1. Multifunction (MF) Button
2. Microphone
3. Charging Port
4. Speaker
5. LED Indicator
6. Volume Up (Vol+)
7. Volume Down (Vol-)
8. Earhook


                                
                  -          -
        s u p p o r t @ u s b i d . c o . i l

How to select the voice prompt languages:
Bluedio D10 has voice prompts feature. There are 3 optional languages: English, Chinese, and Spanish. When
you use D10 for the first time, you can choose the language you prefer following the instructions below:
1. Press the MF button to turn the headset on. The headset will start flashing and you will hear the voice prompt
of „power on‟ in English.
2. Next, you will hear “press call button to confirm English”. If you want to select English as default language,
press the MF button once.
3. If you do not select English, you will hear the Chinese prompt after a 6-seconds‟ interval. You can press the
MF button once to confirm Chinese as default language.
4. If you do not select either English or Chinese, you will hear the prompt in Spanish after 6 seconds. You can
press the MF button once to confirm Spanish as default language.
5. To change default language, please make sure the headset is on; then press MF button and Volume Up
button (Vol+) at the same time until the headset is turned off. Then repeat Step 1-4 to select your preferred
language.
How to setup dual connections:
Bluedio D10 is a Bluetooth headset with multipoint connectivity. It can be paired and connected to 2 mobiles
phones at the same time.
To Pair and connect to Phone 1:
1. Press and hold the MF button until the LED light turns on in solid blue. At the same time, you will hear the
voice prompts “Power on. Ready to pair. Please connect to phone or computer, go to phone or computer
Bluetooth manual, turn on Bluetooth, passkey is 0000.”
2. Enable the Bluetooth feature on the phone and set the phone to search for Bluetooth devices.
3. Select “D10” from the list of found devices.
4. If asked, enter the passcode 0000 to pair and connect the headset to your phone. If the pairing is successful,
the indicator light will flash in blue twice. You will also hear the voice prompt “Phone 1 connected”.
Note: If your mobile phone or computer supports Bluetooth V2.1 or higher version, you do not need to type in the
passcode.
To Pair and connect to Phone 2:
1. Turn off Bluedio D10 after Phone I has been paired and connected.
2. Press and hold the MF button to enter the paring mode again to pair and connect to Phone 2.
When Phone 2 has been paired and connected to Bluedio D10, turn off the headset and then turn on again.
Bluedio D10 will reconnect with both phones automatically.


                                
                  -          -
        s u p p o r t @ u s b i d . c o . i l

Call management:
Redial: Press and hold the MF button for 2 seconds.
Call answer: Press the MF button to answer the call. During a phone call, if another incoming call is received on
the 2nd phone, you will hear a beep. Now you can:
•Answer the incoming call on 2nd phone: Press and hold the MF button for 2 seconds until you hear the
beep, the 1st call will be put on hold and you can answer the call on the 2nd phone.
•Switch between 2 calls: Press and hold the MF button for 2 seconds until you hear the beep to switch
between 2 calls.
•Reject the incoming call on 2nd phone: Press Volume Down button (Vol-) for 2 seconds to reject the call on
the 2nd phone
•End current call and accept call on the 2nd phone: Press the MF button once to end the current call and
press again the MF button to accept the call on the 2nd phone.
Call reject: Press and hold the MF button for 2 seconds.
Put a call on hold: Press and hold the MF button for 2 seconds until you hear a beep.
Voice dial: Press the MF button briefly.
Switch the call between headset and phone:
•From headset to phone: Briefly press MF button twice
•From phone to headset: Briefly press MF button 3 times.
Warranty & Return Policy:
Guangzhou Liwei Electronics Co.,Ltd. (hereinafter called „Liwei‟) warrants that the product accompanied by this
limited warranty is free from manufacturing defects in material or workmanship for a period of twelve (12) months
from the date of shipment and is subject to the following conditions:
What this Limited Warranty does not cover:
This limited warranty does not apply to: (1) defects resulting from repair or alteration of the product, (2) defects
resulting from use with covers, inserts accessories, or other components not supplied by or expressly approved in
writing by Liwei, (3) defects resulting from misuse, including any use not in accordance with the product
instructions, abuse, accident, neglect, improper maintenance or handling, or normal wear and tear, (4) defects
such as corrosion or molding resulting from improper storage, such as storage outdoors, storage in damp
environments, or storage with moisture or salt on the product, (5) all cabinets and accessories such as corded
headset (if included), plastic ear hook, etc., and (6) consumables such as AC adaptor and internal rechargeable
batteries are covered for up to 6 months from the date of shipment.