Mobile
phone
PC
Congratulation! Youhave gota Mobile HIFIsystem.
Please read thismanual thoroughly, and setup your Bluetooth wirelessmusic World.
1. Check thepackage contents
The package include:
USB charging Cable
Power Adapter
Quick Guide
Bluetooth Stereo
Receiver
Stereo RCA interconnectcable Power LED
Connect indicator
Connect
Button
RCA jack USB jack
Bluetooth Stereo ReceiverQuick Guide
To pairwith your phone
1. Enable Bluetoothon your phone.
2. Turnon your mobilephone.
3. Turnon the receiverby pressing reset key.
4. In thephone's Bluetooth menu,search fordevices.
5. Select Bluexon .
6.
5. Using withyour mobilephone6. Using withyour PC
4. How to connect
2. Charge thebattery
Plug the USBcable
Plug the poweradapter
3. To turn onthe power
To turn onthe power, Press andhold theconnect button (about 2 seconds)
until the Connectindicator light blue.
To turn off the power,Press andhold theconnect button (about 2 seconds)
until the Connectindicator light off.
Blue LED power is on
Blue flashing LED finish connected successfully.
Red LED Battery is charging, turnsgreen when chargedfully.
Red flashing LED Battery is low
2.
1. Connect the Bluetooth receiver to your stereo system by the enclosed
Stereo RCA interconnect cable. Or connect the earphone to the RCA
jack of the receiver.
4. Sit back, relax and enjoy your music!
Ensureyourmobile or PCwasbuiltin BLUETOOTHA2DP profilebefore
using.Remark: A2DP means Advanced AudioDistribution Profile.
The device canwork continuously forsix hours. Ifit is almostno power,
the power LEDwill flash red,please using thepower adapter orthe USB
cable to charge.
Plug one endof the USBjack into thereceiver, andinsert the otherend to
a USB port ofyour PC. (Makesure your PCis on)or
Plug one endof the USBjack into thereceiver, andthe other endinto the
power adapter.(Make sure thepower adapter connectedto the power)
When it isbeing charged, thepower LED keepslighting red. Ifit is fully
charged, the powerLED will turngreen.
Note: Before thefirst use, chargethe battery fully for about
10 hours. Thereafter,recharging takes about90 Minutes.
3. Open your favorite play list and press Play from your mobile or PC.
Before using, pleasecheck if yourmobile phone hasBluetooth A2DP profile, if
you are notsure of that,please consult withyour mobile provider. Ifyour mobile
phone doesn't support A2DP, you haveto buy aBluetooth transmitter to pair with
the receiver.
Enter the PINcode 0000 . Select andplay the Musicon your mobile
phone, select Use Bluetooth . Yourmobile phone willbe connected
with the receiverand send themusic. Toterminate the musictransportation,
select Usemobile .
For further details, pleaserefer to youruser manual ofmobile phone.
Before using, pleasecheck if yourPC has BluetoothA2DP profile,
if you arenot sure ofthat, please consultwith your PCprovider.
If your PChas no A2DPprofile, you canupgrade it bya Bluetooth
Audio Dongle, afterfinishing upgrading Bluetoothyour PC, you
can pair thereceiver.
Connect the mobilephone or PCto your Bluetooth stereo receiver.
The Blue LEDon the receiverwill flash whenconnected.
(Please refer thechapter 5 and6)
Earphone
Stand for receiver