CaryMart S6C-DC09 User manual

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
RF Wireless Remote Control Radio Controller / Transmitter & Receiver
Package Include:
1 x Receiver: S6C-DC09 / S6C-DC12 / S6C-DC24 (6 Channel / 6 Control Modes)
6 x Transmitter: C-1
1 x User manual
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S6C-DC09 / S6C-DC12 / S6C-DC24
Channel: 6 CH
6 Control Modes: Latched, Momentary, Toggle, Momentary + Toggle, Momentary + Latched
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): DC12V±1V (S6C-DC12), DC9V±1V (S6C-DC09), DC24V±1V (S6C-DC24)
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB Size: 94mm x 73mm x 20mm
Case Size: 100mm x 80mm x 30mm
Static Current: ≤6mA
Maximum Working Current: 10A / each channel
Transmitter:
Model No.: C-1
Channel: 1 CH
Remote Control Distance: 100m / 300ft (theoretically)
Encode: Fixed code by soldering
Unit size: 58mm x 39mm x 16mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
following operation):
1) Learning Toggle control mode: When the receiver is in the status of LEARNING, press button of the remote control 1.
Control mode Toggle (Channel 1~6): Press -> On; Press again -> Off.
Press button of remote control 1: Turn on relay 1 (connect B and C, disconnect A and B)
Press button of remote control 1 again: Turn off relay 1 (disconnect B and C, connect A and B)
…
Press button of remote control 6: Turn on relay 6 (connect B and C, disconnect A and B)
Press button of remote control 6 again: Turn off relay 6 (disconnect B and C, connect A and B)
2) Learning Momentary control mode: When the receiver is in the status of LEARNING, press button of the remote control 2.
Control mode Momentary (Channel 1~6): Press and hold -> On; Release -> Off.
Press and hold button of remote control 1: Turn on relay 1 (connect B and C, disconnect A and B)
Release button of remote control 1: Turn off relay 1 (disconnect B and C, connect A and B)
…
Press and hold button of remote control 6: Turn on relay 6 (connect B and C, disconnect A and B)
Release button of remote control 6: Turn off relay 6 (disconnect B and C, connect A and B)
3) Learning Latched control mode: When the receiver is in the status of LEARNING, press button of the remote control 3.
Control mode Latched (Channel 1~8): Press -> On, other relays Off; Press other button -> Off.
Press button of remote control 1: Turn on relay 1 (connect B and C, disconnect A and B)
Turn off other relay (disconnect B and C, connect A and B)
…
Press button of remote control 6: Turn on relay 6 (connect B and C, disconnect A and B)
Turn off other relay (disconnect B and C, connect A and B)

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
4) Learning Momentary (Channel 1~3) + Toggle (Channel 4~6) control mode: When the receiver is in the status of LEARNING, press button of
the remote control 4.
5) Learning Momentary (Channel 1~3) + Latched (Channel 4~6) control mode: When the receiver is in the status of LEARNING, press button of
the remote control 5.
6) Learning Toggle control mode (Channel 1~4) + All On / Off (Channel 5/6): When the receiver is in the status of LEARNING, press button of the
remote control 6.
Press button of remote control 5: Turn on all 6 relays
Press button of remote control 6: Turn off all 6 relays
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored
codes have been deleted successfully.
Learning the button of remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press button on any remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
Application Circuit
A, B=Normally Closed; B, C=Normally Open.
Lamp 1
Lamp 3
Lamp 5
Lamp 2
Lamp 4
DC 0~28V / AC 110~240V
Lamp 6
Power Supply
+
_
Button
Power LED
Relay 1
Relay 3
Relay 5
Relay 2
Relay 4
Relay 6
IC
Antenna
RF module
B
C
A
B
C
A
B
C
A
B
A
C
B
A
C
B
A
C
Signal LED