POWER
•To power the unit ON press the POWER/CONNECT button (2) and the blue indicator
lights on the buttons will light up.
•To power the unit OFF press the POWER/CONNECT button (2) and the blue indicators
on the buttons will turn off.
VOLUME
•Adjust the volume using the VOLUME+ (3) and VOLUME-(1) buttons.
BLUETOOTH CONNECTION
•Power the unit ON by pressing the POWER/CONNECT button (2). The
POWER/CONNECT button (2) will begin to flash and the speaker will make a
beeping sound to indicate it has entered the Bluetooth “pairing” (connection)
mode.
•On your compatible Bluetooth device (smartphone, iPhone®, iPod®, iPad®,
etc.), the item will appear in the device list as 100B. Select “connect” and your
device will automatically be paired.
•Once the compatible device pairs with the speaker, the speaker will confirm with
another beeping sound.
•After pairing for the first time, the speaker automatically “pair”with the same
Bluetooth device. Just select 100B from the Bluetooth device list on your
compatible device and the speaker will automatically be paired.
•NOTE: Contact the manufacturer of your Bluetooth compatible device or
check the manual from your device for instructions on pairing.
AUXILIARY CONNECTION
•Connect the supplied 3.5mm stereo audio cable from the headphone jack, or other audio
output, on your compatible device into the AUXILIARY INPUT (5) on the rear of the
speaker.
•Adjust the volume control on the connected device to an acceptable level.
•Use the controls of the connected device to control audio playback.
•NOTE: When a 3.5mm cable is connected, the Bluetooth® signal will be automatically
disconnected and cannot be wirelessly paired while the plug is in the AUX jack. To
resume Bluetooth® wireless playback, unplug the audio cable from the AUXILIARY
INPUT (5) on the back of the unit and “pair” the device again.
TROUBLESHOOTING
Question: Can’t pair successfully after multiple connections?
Solution:
(1)Check if the blue indicator on the buttons lights on, if the indicator goes off, please press
the power button, if the blue power indicator doesn’t flash, please make sure USB cable
is connected tightly or the batteries in the unit are properly working.
(2)There may be other Bluetooth devices near the speaker causing interference with the
connection. Please turn off the Bluetooth function on the other devicesyou are not using.
(3)Power off and then power on the unit, to restart the Bluetooth function on the unit or on
your Bluetooth device.
(4)Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device.