Bluestream BSPLED User manual

Instruction Manual
Model : BSPLED
LIMITED 90-DAY WARRANTY
We warrant this product to be free from defects in material and workmanship
under normal use for a ninety-day period from the original date of purchase from
an authorized BLUESTREAM dealer.
Should you be missing any of the included accessories, please contact the
Customer Support Center to secure a replacement. It is not necessary to bring the
unit back to the store.
We will replace the unit free of charge should it become defective under this
warranty, providing you, the original purchaser, have your original dated sales
receipt.
To obtain warranty service or replacement within the ninety-day warranty period,
please return the product with all parts and accessories along with your original
dated store receipt to the original place of purchase and the unit will be
exchanged at no charge. It is not necessary to contact the manufacturer for
warranty replacement.
Our Customer Support Center is available Monday - Saturday (10:00AM to
7:00PM EST) for technical assistance or troubleshooting. To contact us, please
call 1-855-719-8324 or visit www.sibrandssupport.com
This warranty applies only under conditions of normal use. Our products are not
intended for outdoor use.
There are no consumer serviceable parts contained in this product and any
attempt by the owner to service or repair the unit will immediately void all warranty
coverage.
This warranty does not cover any product which has been subject to damage due
to an act of nature, misuse, neglect, accident, abuse, commercial use, or
modification of, or to, any part of the product, including the antenna. Damage to
any external media such as USB flashdrives or other memory devices are not
covered nor is the cost incurred in shipping the unit for warranty repair or
exchange. Under no circumstances shall BLUESTREAM be liable for any loss
(direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for
any damage arising out of, or in connection with, the use of this product.
UNDER NO CIRCUMSTANCES WILL BLUESTREAM BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
This warranty does not cover re-manufactured, refurbished, or repaired units, or
any products sold 'As Is'.
8 USB Port
9 On/Off Button
10 Line-in Input
11 5V Charging Port
12 Indicator Light
13 Microphone
1 Mode Button
2 Phone Button
3 Volume - / Previous Button
4 Play / Pause Button
5 Volume + / Next Button
6 LED Light On/Off
7 microSD Card Slot
For technical assistance or troubleshooting please
call 1-855-719-8324 or visit www.sibrandssupport.com

Using Bluetooth: Pairing Your Device
Play / Pause the music
1. Move the On/Off switch to the ON position.
2. You will hear a short chime and the standby indicator light
will turn blue.
3. Prior to using the speaker for the first time, you must pair it
with a Bluetooth-enabled device, the device will search for
accessible Bluetooth devices.
4. Select "BSPLED” from the device list on your phone/tablet.
5. When pairing is completed, you will hear a short chime. Now
the speaker is ready for use and in standby mode, the blue
light will stop flashing.
6. You should now be able to use the wireless speaker to listen
to music. Please place your Bluetooth device within 30ft. of
the speaker.
Short press the button to pause and re-play music on your
Bluetooth device. You can also use the playback controls found
directly on your Bluetooth device to control music playback.
LED party light
1. Press the LED button to turn the party light ON.
2. Press again to turn the party light OFF.
3. The light will flash with the music during playback.
Changing playing mode
Press to select between the different modes: Bluetooth,
USB, Line-in, microSD.
Reject a call
To reject an incoming call press the button twice when
the phone is ringing.
Last Number Re-Dialing:
Under standby mode, press the button twice for last number
redial.
Connect the speaker with 3.5mm audio cable
If you wish to use a device that does have Bluetooth, simply
connect the supplied 3.5mm Aux cable to the line-out or
headphone output of the device.
Press the button to switch to Line-in mode.
Note: all playback controls (Play, Pause, etc.) will be controlled
directly on your connected device.
Charging the speaker
Connect the micro USB plug to the 5V charging port and the
USB plug to a USB charging device (not included).
The Indicator Light will blink Red while the unit is charging.
The Indicator Light will stop blinking when unit is fully charged.
Note: an alert chime will sound when the battery level gets low.
Music from microSD card or USB Flash Drive
Supported formats: MP3, WAV, WMA
Reduce Volume / Previous Song
During music playback, or while on a phone call, press and
hold the reduce volume button to reduce volume level or
adjust on your device.
To go to the previous song, Short press the button.
Increase Volume / Next Song
During music playback or while on a phone call, press and
hold the increase volume button to increase volume level
or adjust on your device.
To go to the nex song, Short press the button.
Answering a Call
To answer a call, short press the button to accept the
call. Or answer the call via your smartphone in the normal way.
NOTE: Please try to keep 30-50cm distance from speaker when
answering a call.
Ending a Call
A short press of the button will end your call. Or end the call
directly on your smartphone in the normal way.
Operating the Speaker
M
M