BluMill MT-710 User manual

EN - Manual...................................... 2
NL - Gebruiksaanwijzing..............18
FR - Mode d’emploi ......................34
DE - Anleitung ...............................51
IT - Istruzioni per l’uso ................. 67
MT-710
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 12021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 1 23-08-2021 10:0223-08-2021 10:02

• Please read the manual carefully before using the product and
keep these instructions for reference.
• This product cannot be used by children under 8 years of age or
people with mental disabilities. If you need to use it, please do
so under the supervision of a guardian. Please do not let children
ride on the product or play with the product as a toy. Do not use
the product in a room where infants sleep.
• Problems that may arise in relation to cleaning products should
be eliminated as soon as possible. Clear away power cords and
small items on the oor to prevent the product from becoming
blocked during the cleaning process. Fold over carpet edges and
make sure hanging curtains, tablecloths, etc. are not touching the
ground.
• If there is an obstacle such as a staircase, test the product rst to
see if it can detect the edge of the obstacle without falling from
it. Protective barriers should be placed at the edge of the obsta-
cle to prevent products from falling. Make sure these protective
barriers cannot cause personal injury.
• Please follow the instructions in the manual when using the
product and only use accessories recommended or sold by the
manufacturer.
• Ensure that the power supply voltage complies with the voltage
indicated on the product.
• Use only in indoor home environments. Do not use in outdoor,
commercial or industrial locations.
• Use only original rechargeable batteries and charging docks that
are unique to the manufacturer. Do not use non-rechargeable
Please read the manual carefully before using
the product and keep this instruction for
reference.
Safety Regulations
2
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 22021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 2 23-08-2021 10:0223-08-2021 10:02

batteries. For battery specications, please refer to ‘Technical
Data’. Make sure that dust compartments and lter materials are
installed before using the product.
• The product must not be used in an environment with open
ames or fragile items, nor in extremely hot (above 40°C) or very
cold (below -40°C) conditions.
• Keep hair, clothes, ngers and other body parts away from the
product’s opening and operating parts.
• Do not use the product on wet or waterlogged surfaces.
• The product should not be used to vacuum up items such as the
following:
- Stones and waste paper.
- Flammable materials such as those used for printers or copiers.
-Cigarettes, matches, ash, or other items that may cause a re.
• Do not vacuum up any products that are already on re. Do not
place any items at the suction outlet. Do not use the product if
the suction opening is blocked. Remove dust, cotton wool, hair,
etc. from the suction opening to ensure smooth air circulation.
• Use the power cord carefully to avoid any damage. Do not use
the power cord to drag or pull the product from the product
charging dock. Do not use the power cord as a handle. Do not
clamp the power cord between doors. Do not pull the power
cord around sharp corners.
• Do not use the product if the power cord, power outlet or char-
ging dock are damaged. Do not use the product if it is not wor-
king properly due to it having been dropped, damaged, or used
outdoors, or if any water has entered the device. To avoid injury
the product should be repaired by the manufacturer or its af-
ter-sales service. Please contact our customer service at: klanten-
ser[email protected].
• Turn o the product switch before cleaning and maintaining the
product.
3EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 32021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 3 23-08-2021 10:0223-08-2021 10:02

Product Instruction
What’s in the box
1
5
9
2
6
10
3
7
4
8
1. Robot Vacuum Cleaner
2. Charging Dock
3. Remote Control
4. Power Adapter
5. Side Brushes X 4
6. HEPAX 2
7. Cleaning Brush
8. Water Tank
9. Mopping Cloth
10. Instruction Manual
4
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 42021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 4 23-08-2021 10:0223-08-2021 10:02

List of parts
Main Unit
WiFi Indicator Light
Universal Wheel
Dust Compartment
Right Brush
Drive Wheels
Dust Compartment
Key (Start or Pause)
Lower Vision Sensor
Charging Pole
Infrared Sensors
Left Brush
Roller Brush Assembly
Top ViewBottom ViewDust Compartment
5EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 52021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 5 23-08-2021 10:0223-08-2021 10:02

List of parts
Primary Filter
Dust Compartment
Upper Cover
Filter Sponge
Dust Compartment Lower
Cover
Dustbin Key
High Eciency Filter
(HEPA)
Dust Compartment
Water Tank
Mopping Cloth
Cleaning Tools
Charging Pole
Dustbin Key
Water Tank Sealing Plug
Indicator Light
Power Adapter
Power Adapter Slots
Water TankCharging Dock Assembly
6
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 62021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 6 23-08-2021 10:0223-08-2021 10:02

Power
Wall following
Stop/Start
Left
Turbo
Return home
Forwards
Right
Spot cleaning
Full GO
Backwards
Remote Control
Parameters
Product Model MT-710
Input DC 14.4V
Power 30W
Battery Capacity DC 14.4V Li-ion 2500mAh
Dust Compartment Capacity 0.6L
Cleaning Time 120 min
Charging Time 300 min
Battery DC 3V(AAA)
Remote Control Method Infrared
Transmission and Reception
Distance
S5M
Input 100-240V/50-60Hz
Output 19V/0.6A
Install 2 AAA batteries before using the remote control for the rst time. Make sure the positive and
negative ends are facing the correct way as marked in the battery compartment.
7EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 72021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 7 23-08-2021 10:0223-08-2021 10:02

Attention
Considerations
Please refer to the following guidelines to check the cleaning area before the cleaner starts opera-
ting.
Rapid Operation
Install the Side Brushes
Install the right brush in the mounting port at the bottom right of the machine and the left brush in
the mounting port at the bottom left of the machine and also ensure that the two side brushes are
in place.
1. Power cords and
other items scatte-
red on the ground
may obstruct the
product and must be
removed.
2. Please roll up carpet
tassels and do not
use on deep-pile
rugs.
3. The product may
get stuck in gaps
of less than 8 cm at
the bottom of items
of furniture. If you
need to clean these
areas, please remove
the furniture.
4. If there are oors
at dierent levels,
a barrier must be
used to prevent the
product from falling
from one oor to
the other.
8
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 82021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 8 23-08-2021 10:0223-08-2021 10:02

Charging Operation
1. Connect the adapter to the charging dock. Place the charging dock at against the wall. Do not
place objects within 1meter to the left and right and within 2meters to the front. Also make
sure there are no objects nearby with highly reective surfaces such as mirrors
2. Turn On The Main Unit
Press the Start/Pause key to turn on the main
unit. It is advisable to keep the main unit in
the charging dock after each use instead of
immediately shutting it down. This will ensure it
performs properly next time.
Main Unit Charge
Place the main unit in the charging dock
and make sure the charging pole is properly
positioned. Turn on the power switch and the
robot will enter standby mode.
A ashing red light indicates that the battery
needs to be charged.
A ashing blue light indicates the battery is
charging.
Charging will have been completed when the
blue light goes out.
Please charge continuously for more than 6
hours before using for the rst time.
LNote: Please make sure the charging pole is
correctly positioned.
9EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 92021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 9 23-08-2021 10:0223-08-2021 10:02

Start/Stop Cleaning
1. Start or Stop by pressing the main unit’s
key or the remote control’s 10 key.
LNote: Before selecting the mode, make sure
that the outer ring of the key is blue and
the main unit has been activated. If this is not
the case, briey press the main unit’s key
. The main unit will enter sleep mode after
10 minutes of being on standby and if the
key light is o.
2. If you need to select another mode, please
refer to the Mode Selection section.
Mode Selection
In order to adapt to dierent oor conditions and achieve deep
cleaning this product has a variety of cleaning modes which can
be selected by remote control if necessary.
The remote control can be used to switch directly to any mode.
Before starting operations in a particular mode, you should make
sure that the outer ring of the key is blue and that the main
unit is activated. If this is not the case, briey press the main
unit’s key .
Fixed-point Mode
This mode is suitable for cleaning areas where dirt is concentra-
ted. The cleaning operations will then focus on the designated
area, and the cleaner will operate in accordance with a ‘spiral’
route.
Edge Mode
This mode is suitable for cleaning the corners of the room. The
main unit will clean around the edge of a xed object (such as a
wall) and return to the charging dock.
Return Charging Mode
During the cleaning process the main unit will sense that it is low
on power and will automatically return to the charging dock to be
charged. You can also press the ‘Home’ button or press the ‘Po-
wer’ button twice to make the main unit return to the charging
dock in order to be charged.
Twice Cleaning Mode
Select this mode by pressing the ‘Full Go’ button on the remote
control. After initial cleaning the robot will now return to the
charging dock until it is fully charged and will then automatically
go back to cleaning again.
10
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 102021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 10 23-08-2021 10:0223-08-2021 10:02

Suction Power Setting
Press the ‘Turbo’ button on the remote control to select this
mode. There are three modes of suction power (Max/Standard/
Low). The Standard mode can be used for daily cleaning, while
the Max mode will increase the suction power and the Low mode
will reduce the noise.
The Low suction mode can be used to clean wooden oors and
tiled oors, the Standard mode can be used for everyday house-
hold cleaning and the Max mode can be used to clean rugs.
Roller Brush Assembly and Cleaning
Remove the roller brush cover plate, remove the roller brush, cut o the hair wrapped around it and
then use the cleaning brush to clean it.
Installing the roller brush assembly: take out the vacuum assembly rst, install the roller brush, put
the cover back on and press it to lock.
11 EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 112021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 11 23-08-2021 10:0223-08-2021 10:02

Using the Water Permeable Mopping Cloth
1. This product is equipped with a water tank assembly. If mopping has to be done after the
cleaning work has been completed, the dust compartment can be replaced with a water tank
assembly. Please refer to the [Maintenance] section in this manual for the cleaning method.
2. Do not use the water tank assembly on carpet. When cleaning using the mopping cloth func-
tion, fold over the edge of the carpet to prevent foreign matter on the mopping cloth from
soiling the carpet.
3. Please pay attention while cleaning and add or replace water in time. Remove the water stora-
ge compartment when adding water. When charging, be sure to remove the water permeable
wiper assembly.
Step 1Step 2Step 3
Add water
Open the water inlet cover and add sucient water.
Attach the mopping cloth
Close the water inlet cover and attach the mopping
cloth.
Install the water tank assembly
Press the dust compartment release button at the
rear of the main unit to remove the dust compart-
ment and replace the water tank assembly.
12
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 122021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 12 23-08-2021 10:0223-08-2021 10:02

Maintenance
Dust Compartment and Filter
When cleaning and maintaining the main unit and its accessories, turn o the main unit and unplug
the charging dock.
1. Remove the dust compartment, open the dust compartment cover and clean.
2. Remove the dust lter. The HEPA lter should not be washed but should be patted to remove
the dust.
3. Flush the dust compartment and the primary lter.
4. Dry the dust compartment and the dust lter assembly and keep it dry to ensure a long life.
Step 1Step 3 Step 2
Step 4
Let these parts dry naturally for more than 24 hours.
13 EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 132021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 13 23-08-2021 10:0223-08-2021 10:02

Water Tank Assembly
Cleaning the mopping cloth
1. Remove: When mopping is completed, remove the water tank assembly and remove the water
permeable mopping cloth.
2. Maintenance: Rinse and dry the mopping cloth.
3. Remove: After mopping the oor, remove the water tank assembly and the water permeable
cloth and pour o the remaining water in the water reservoir.
Side Brushes
Cleaning the Side Brushes
Pull out the side brush and wipe it with a clean cloth.
Other Assembly
Clean the universal wheel to reduce the amount of entangled hair.
Clear the sensor to maintain its sensitivity.
Use a dry cloth to clean the charging poles on the bottom of the main unit or the charging dock.
Step 1Step 3 Step 2
Maintenance: Rinse the reservoir and allow it to dry.
14
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 142021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 14 23-08-2021 10:0223-08-2021 10:02

If you are not going to use the product for a long time, please remove the battery and keep it in a
safe place. If the battery leaks, remove it and wipe the battery compartment clean.
This product uses a long-life battery and does not need to be replaced frequently. If you do need to
replace it, you can contact our company’s after-sales service.
Alarms
Cause of Issue Display light APP content Solution
Side brush Red light on Please check whether
side brushes are
jammed.
Clean side brush.
Fan abnormality Red light on Motor cooling error. Please wait an hour
before using.
Roller brush Red light on Please check whether
roller brush is jammed.
Clean roller brush.
No dustbin inside Red light on Please check whether
dustbin is installed
correctly.
Please check whether
dustbin is in position.
Failure of surface
detection
Red light ashing Please check whether
wheels are on the
oor.
Clean the surface de-
tector and make sure
I'm not lifted up.
Stuck Red light ashing Please help me, I'm
stuck.
Please take me to an
open space.
Low battery Red light ashing Battery low, please
recharge me.
Manually move the
cleaner back to the
charging dock for
recharging.
Charging abnormality Red light ashing Please turn on the
power switch in order
to charge.
Please turn on the
power switch in order
to charge.
Gyroscope fail Red light ashing Navigation failure,
please restart me.
Turn on the switch
again.
15 EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 152021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 15 23-08-2021 10:0223-08-2021 10:02

FAQ
Please install the right brush in the machine’s right bottom mounting port, the left brush in the left
bottom mounting port and make sure that the two side brushes are in place.
What should I do if the robot does not work on my carpet?
We suggest that you do not use the robot to clean the carpet and instead set a boundary
around the carpet with the app.
What should I do if the vacuum cleaner is not vacuuming at full strength?
First of all check whether the dustbin is full and the robot is fully charged. If this is the case you
can try to switch it to a higher mode. In the case of persistent dust and debris try using the Spot
Cleaning Mode.
What should I do if the robot cannot nd the charging dock?
The charging dock should be placed against the wall with at least 1meter of clearance on each
side and 2meters at the front. Sometimes you will need to put the robot back manually.
What should I do if the remote control does not work?
1. The remote control has an eective operating distance of 5meters. Please make sure that
the remote control is pointed at the main unit.
2. Replace the battery with a new one if it runs out of power.
3. Make sure the main unit’s power switch is turned on and has sucient power to operate.
4. Wipe the infrared emitter of the remote control and the infrared receiver of the main unit
with a clean towel.
Why does the main unit return to the charging dock after cleaning?
The main unit operates for variable periods depending on the complexity of the room, the
amount of dust and debris and the cleaning mode.
WiFi Connection
1. Scan the QR code or search for ‘Smart Life’ and download the App.
2. Once the App has been installed, please follow the App instructions to register an account and
login.
3. Open the APP and click {add device}, {Small Home App }, {Robot Vacuum}.
16
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 162021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 16 23-08-2021 10:0223-08-2021 10:02

4. Make sure that the WiFi indicator is ashing / WiFi Push the front bumper and long press the
key until the ashes. When the WiFi indicator ashes, click the .
Check to make sure that the indicator is rapidly blinking on the App.
5. Enter the WiFi account and password. (Currently only supports 2.4G WiFi so 5G WiFi cannot be
connected.)
17 EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 172021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 17 23-08-2021 10:0223-08-2021 10:02

• Dit product is niet geschikt voor gebruik door kinderen jonger
dan 8 jaar of door mensen met een verstandelijke beperking,
tenzij dit onder toezicht gebeurt. Dit product is geen speelgoed:
laat kinderen er niet op rijden of mee spelen. Gebruik het
apparaat niet in een kamer waar jonge kinderen slapen.
• Indien er een probleem bij het reinigen optreedt, dient dit zo
snel mogelijk te worden opgelost. Zorg dat de vloer vrij is van
snoeren en kleine voorwerpen, zodat het apparaat tijdens het
stofzuigen vrij kan bewegen. Vouw de randen van vloerkleden
om en zorg dat gordijnen, tafelkleden, etcetera de vloer niet
raken.
• Indien er obstakels zijn zoals een trap, test dan eerst of het
apparaat de rand van het obstakel detecteert zonder ervan af te
vallen. Plaats indien nodig barrières om de rand van het obstakel
om te voorkomen dat het apparaat valt. Zorg ervoor dat deze
barrières geen verwondingen kunnen veroorzaken.
• Volg de instructies in de gebruiksaanwijzing bij het gebruik van
het apparaat en gebruik alleen accessoires die door de fabrikant
worden aanbevolen of verkocht.
• Controleer of de voedingsspanning overeenkomt met de
spanning die op het product staat aangegeven.
• Gebruik het product alleen binnenshuis. Niet buiten of voor
commerciële of industriële doeleinden gebruiken.
• Gebruik uitsluitend de originele oplaadbare batterijen
en oplaadstations van de fabrikant. Gebruik uitsluitend
oplaadbare batterijen. Raadpleeg ‘Technische gegevens’
voor de batterijspecicaties. Zorg dat het stofreservoir en de
Lees de gebruiksaanwijzing voor gebruik goed
door en bewaar deze instructies.
Veiligheidsvoorschriften
18
NL
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 182021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 18 23-08-2021 10:0223-08-2021 10:02

ltermaterialen op de juiste wijze zijn bevestigd alvorens het
product te gebruiken.
• Gebruik het product niet in een omgeving met open vuur of
breekbare voorwerpen of bij extreem hoge (boven 40°C) of lage
(onder -40°C) temperaturen.
• Houd haar, kleding, vingers en andere lichaamsdelen uit de buurt
van de zuigmond en van werkende onderdelen van het apparaat.
• Gebruik het apparaat niet op vochtige of natte oppervlakken.
• Het apparaat is niet geschikt voor het opzuigen van onder
andere:
• stenen en papier;
• brandbare materialen zoals toner van printers of
kopieerapparaten;
• sigaretten, lucifers, as of andere voorwerpen die brand
kunnen veroorzaken.
• Zuig geen brandende of gloeiende materialen op. Plaats geen
voorwerpen bij de luchtuitlaat. Gebruik het product niet indien
de zuigmond geblokkeerd is. Verwijder stof, pluis, haar, etcetera
uit de zuigmond voor een goede luchtcirculatie.
• Wees voorzichtig met het snoer om schade eraan te voorkomen.
Gebruik het snoer niet om het product vooruit te trekken of
uit het oplaadstation te verwijderen. Gebruik het snoer niet als
handgreep. Zorg ervoor dat het snoer niet tussen de deur klem
komt te zitten. Trek het snoer niet om een scherpe hoek.
• Gebruik het apparaat niet indien het snoer, het stopcontact
of het oplaadstation beschadigd is. Gebruik het apparaat niet
als het niet naar behoren werkt als het gevallen, beschadigd,
of buitenshuis gebruikt is, of als er water in het apparaat is
gekomen. Om schade te voorkomen, dient het apparaat alleen
te worden gerepareerd door de fabrikant of de servicedienst.
Neem contact op met onze klantenservice via: klantenservice@
omnichannelgroup.com.
• Schakel het apparaat uit vóór reiniging en onderhoud.
19 NL
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 192021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 19 23-08-2021 10:0223-08-2021 10:02

Instructies bij het product
Inhoud
1
5
9
2
6
10
3
7
4
8
1. Robotstofzuiger
2. Oplaadstation
3. Afstandsbediening
4. Stroomadapter
5. Zijborstels (4x)
6. HEPA-lter (2x)
7. Reinigingsborstel
8. Waterreservoir
9. Dweildoek
10. Gebruiksaanwijzing
20
NL
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 202021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 20 23-08-2021 10:0223-08-2021 10:02