BMW Motorrad M 1000 RR 2022 Installation and maintenance manual

RIDER'S MANUAL
M 1000 RR
BMW
MOTORRAD
MAKE LIFE A RIDE

Vehicle data
Model
Vehicle Identification Number
Colour code
Date of first registration
Registration number
Dealership details
Person to contact in Service department
Ms/Mr
Phone number
Dealership address/phone number (company stamp)

YOUR BMW.
We congratulate you on your choice of a vehicle from
BMW Motorrad and welcome you to the community of BMW
riders. Familiarise yourself with your new vehicle so that you can
ride it safely and confidently in all traffic situations.
About this rider's manual
Read this rider's manual carefully before starting to use your
new BMW. It contains important information on how to operate
the controls and how to make the best possible use of all your
BMW's technical features.
In addition, it contains information on maintenance and care to
help you maintain your vehicle's reliability and safety, as well as
its value.
If the time comes to sell your BMW, please remember to hand
over this rider's manual to the new owner. It is an important part
of the vehicle.
We hope you will enjoy riding your BMW and that all your jour-
neys will be pleasant and safe
BMW Motorrad.

01 GENERAL
INSTRUCTIONS 2
Quick & easy reference 4
Abbreviations and sym-
bols 4
Equipment 5
Technical data 5
Currency 6
Additional sources of
information 6
Certificates and operat-
ing licences 6
Data memory 6
02 GENERAL VIEWS 12
General view, left side 14
General view, right
side 15
Under the rider's seat 16
Multifunction switch,
left 17
Multifunction switch,
right 18
Instrument cluster 19
03 STATUS
INDICATORS 20
Indicator and warning
lights 22
TFT display in
Pure Ride view 23
TFT display in Menu
view 24
Warning indicators 25
04 OPERATION 46
Ignition switch/steer-
ing lock 48
Emergency-off switch
(kill switch) 49
Lighting 50
Dynamic Traction Con-
trol (DTC) 52
Riding mode 53
Cruise control 55
Hill Start Control 57
Shift light 59
Anti-theft alarm (DWA) 59
Heated grips 61
On-board computer 62
Front and rear seats 63
05 TFT DISPLAY 66
General notes 68
Principle 69
Pure Ride view 75
General settings 76
Bluetooth 77
My vehicle 81
Navigation 84
Media 86
Telephone 87
Display software ver-
sion 88
Display licence inform-
ation 88

06 ADJUSTMENT 90
Mirrors 92
Headlight 92
Brakes 92
Clutch 93
Footrest system 94
Steering 96
Spring preload 97
Damping 99
Swinging arm 102
Riding height 105
07 RIDING 108
Safety information 110
Regular check 113
Starting 113
Running in 116
Shifting gear 117
Brakes 119
Parking your motor-
cycle 121
Refuelling 122
Securing motorcycle
for transportation 124
08 ON THE RACE
TRACK 126
Status indicators for
racing 128
LAPTIMER 131
Vehicle settings for
racing 132
RACE PRO riding
modes 133
Launch Control 134
Pit Lane Limiter 136
DTC 137
Chassis and
suspension settings
for racing 139
Mirrors 139
Number plate carrier 143
M Cover Kit 148
Switching off ABS
when riding on the
race track 150
Gearshift-pattern re-
verser 151
Data recording and
2D software 152
09 ENGINEERING DE-
TAILS 154
General notes 156
Antilock Brake Sys-
tem (ABS) 156
Dynamic Traction
Control (DTC) 160
Riding mode 161
Dynamic Brake Con-
trol 163
Gear Shift Assistant 164
Hill Start Control (Hill
Start Control Pro) 165
10 MAINTENANCE 168
General notes 170
Toolkit 170
Front-wheel stand 171
Rear-wheel stand 172

Engine oil 172
Brake system 174
Clutch 179
Coolant 180
Tyres 181
Wheel rims 182
Wheels 182
Chain 189
Lighting 193
Trim panel compon-
ents 193
Jump-starting 197
Battery 198
Fuses 201
Diagnostic connector 202
11 ACCESSORIES 204
General notes 206
Connector for op-
tional accessories 206
USB charging socket 208
12 CARE 210
Care products 212
Washing the vehicle 212
Cleaning easily dam-
aged components 213
Care of paintwork 214
Paint preservation 215
Laying up motorcycle 215
Restoring motorcycle
to use 216
13 TECHNICAL DATA 218
Troubleshooting chart 220
Threaded fasteners 223
Fuel 227
Engine oil 228
Coolant 228
Engine 228
Clutch 229
Transmission 229
Final drive 230
Frame 230
Chassis and
suspension 230
Brakes 231
Wheels and tyres 232
Electrical system 233
Anti-theft alarm 233
Dimensions 233
Weights 234
Performance figures 234
14 SERVICE 236
Reporting safety-rel-
evant defects 238
Recycling 239
BMW Motorrad
Service 239
BMW Motorrad
Service history 240
BMW Motorrad mo-
bility services 240
Maintenance work 241
Maintenance sched-
ule 242
BMW Motorrad run-
ning-in check 243

Maintenance confirm-
ations 244
Service confirmations 256
APPENDIX 258
Declaration of Con-
formity 259
Certificate for elec-
tronic immobiliser 262
Certificate for TFT
instrument cluster 265
INDEX 268

GENERAL
INSTRUCTIONS
01

QUICK & EASY REFERENCE 4
ABBREVIATIONS AND SYMBOLS 4
EQUIPMENT 5
TECHNICAL DATA 5
CURRENCY 6
ADDITIONAL SOURCES OF INFORMATION 6
CERTIFICATES AND OPERATING LICENCES 6
DATA MEMORY 6

4 GENERAL INSTRUCTIONS
QUICK & EASY REFERENCE
An important aspect of this
rider's manual is that it can be
used for quick and easy refer-
ence. Consulting the extensive
index at the end of this rider's
manual is the fastest way to
find information on a particular
topic or item. To first read an
overview of your vehicle, please
go to Chapter 2. All mainten-
ance and servicing work on the
vehicle is documented in the
“Service” section. The record of
the maintenance work you have
had performed on your vehicle
is a precondition for generous
treatment of goodwill claims.
ABBREVIATIONS AND SYM-
BOLS
CAUTION Low-risk haz-
ard. Non-avoidance can
lead to slight or moderate in-
jury.
WARNING Medium-risk
hazard. Non-avoidance
can lead to fatal or severe in-
jury.
DANGER High-risk haz-
ard. Non-avoidance leads
to fatal or severe injury.
ATTENTION Special notes
and precautionary meas-
ures. Non-compliance can lead
to damage to the vehicle or ac-
cessory and, consequently, to
voiding of the warranty.
Specific instructions on
how to operate, control,
adjust or look after items of
equipment on the motorcycle.
Instruction.
Result of an activity.
Reference to a page
with more detailed
information.
Indicates the end of
a passage relating to
specific accessories or
items of equipment.
Tightening torque.
Technical data.
NV National-market ver-
sion.

5
OE Optional equipment.
The vehicles are
assembled com-
plete with all the
BMW Motorrad
optional equipment
originally ordered.
OA Optional accessories.
You can obtain
BMW Motorrad
optional accessories
through your author-
ised BMW Motorrad
dealer; optional
accessories have to
be retrofitted to the
vehicle.
ABS Anti-lock brake sys-
tem.
DTC Dynamic Traction Con-
trol.
DWA Anti-theft alarm.
EWS Electronic immobiliser.
EQUIPMENT
When you ordered your
BMW Motorrad, you chose
various items of custom
equipment. This rider's manual
describes optional equipment
(OE) and selected optional
accessories (OA) provided
by BMW. This explains why
the manual may also contain
descriptions of equipment that
you might not have selected.
Please note, too, that on
account of country-specific
differences, your motorcycle
might not be exactly as
illustrated.
If your motorcycle contains
equipment that has not been
described, its description can
be found in a separate manual.
TECHNICAL DATA
All dimensions, weights and
power ratings stated in the
rider's manual are quoted to
the standards and comply with
the tolerance requirements of
the Deutsches Institut für Nor-
mung e. V. (DIN).
Technical data and specifica-
tions in this rider's manual are
guide values. The vehicle-spe-
cific data may deviate from
these, for example as a result
of selected optional equipment,
the national-market version or
country-specific measuring pro-
cedures. Detailed values can be
taken from the vehicle regis-
tration documents, or can be
obtained from your authorised
BMW Motorrad retailer or an-
other qualified service partner
or specialist workshop. The
specifications in the vehicle

6 GENERAL INSTRUCTIONS
documents always have priority
over the information provided
in this rider's manual.
CURRENCY
The high safety and quality
standards of BMW motorcycles
are maintained by constant de-
velopment work on designs,
equipment and accessories.
Because of this, your vehicle
may differ from the information
supplied in the rider's manual.
Nor can BMW Motorrad en-
tirely rule out errors and omis-
sions. We hope you will ap-
preciate that no claims can
be entertained on the basis
of the data, illustrations or de-
scriptions in these operating
instructions.
ADDITIONAL SOURCES OF
INFORMATION
Authorised BMW Motorrad
retailer
Your authorised
BMW Motorrad retailer
will be happy to answer any
questions you may have.
Internet
The rider's manual for your
vehicle, operating and installa-
tion instructions for accessories
and general information about
BMW Motorrad, in relation to
technology, for example, are
available for download from
bmw-motorrad.com/manuals.
CERTIFICATES AND OPERAT-
ING LICENCES
The certificates for the vehicle
and the official operating li-
cences for accessories can be
downloaded from
bmw-motorrad.com/certifica-
tion.
DATA MEMORY
General
Control units are installed in
the vehicle. Control units pro-
cess data that they receive, for
example, from vehicle sensors,
or that they generate them-
selves or exchange between
each other. Some control units
are required for the vehicle to
function safely or provide as-
sistance during riding, for ex-
ample assistance systems. In
addition, control units enable
comfort or infotainment func-
tions.
Information on data that has
been stored or exchanged can
be obtained from the manufac-
turer of the vehicle, for example
via a separate booklet.

7
Personal reference
Each vehicle is identified with a
clear vehicle identification num-
ber. Depending on the coun-
try, the vehicle identification
number, the number plate and
the corresponding authorities
can be referenced to ascertain
the vehicle owner. There are
also other ways to use data ob-
tained from the vehicle to trace
the rider or vehicle owner, for
example using the Connected-
Drive user account.
Data protection rights
In accordance with applicable
data protection laws, vehicle
users have certain rights in re-
lation to the manufacturer of
the vehicle or in relation to
companies which collect or
process personal data.
Vehicle users have the right to
obtain full information at no
cost from persons or entities
storing personal data of the
vehicle user.
These entities may include:
Manufacturer of the vehicle
Qualified service partners
Specialist workshops
Service providers
Vehicle users have the right to
request information on what
personal data has been stored,
for what purpose the data
is used, and where the data
comes from. To obtain this
information, proof of ownership
or use is required.
The right to information also
includes information about
data that has been shared with
other companies or entities.
The website of the vehicle
manufacturer contains the
applicable data protection
information. This data
protection information includes
information on the right to
have data deleted or corrected.
The manufacturer of the vehicle
also provides their contact
details and those of the data
protection officer on their
website.
The vehicle owner can also re-
quest that a BMW Motorrad
retailer or another qualified
service partner or specialist
workshop read out the data
that is stored in the vehicle for
a charge.
The vehicle data is read out
using the legally prescribed
socket for on-board diagnosis
(OBD) in the vehicle.

8 GENERAL INSTRUCTIONS
Legal requirements for the
disclosure of data
As part of its legal responsib-
ilities, the manufacturer of the
vehicle is obligated to make its
stored data available to the rel-
evant authorities. This data is
provided in the required scope
in individual cases, for example
to clarify a criminal offence.
In the context of applicable
laws, public agencies are en-
titled in individual cases to read
out data from the vehicle them-
selves.
Operating data in the vehicle
Control units process data to
operate the vehicle.
This includes, for example:
Status reports of the vehicle
and its individual components,
for example wheel speed,
wheel circumferential velo-
city, deceleration
Environmental conditions, for
example temperature
The data is only processed in
the vehicle itself and is gener-
ally non-permanent. The data is
not stored beyond the operat-
ing period.
Electronic components, for ex-
ample control units, contain
components for storing tech-
nical information. Information
can be temporarily or perman-
ently stored on the vehicle con-
dition, component loads, incid-
ents or errors.
This information is generally
used to document the condi-
tion of a component, a module,
a system or the surrounding
area, for example:
Operating conditions of sys-
tem components, for example
filling levels, tyre pressure
Malfunctions and faults in im-
portant system components,
for example light and brakes
Response of the vehicle in
special riding situations, for
example engagement of the
driving dynamics systems
Information on incidents
resulting in damage to the
vehicle
The data is necessary for the
provision of control unit func-
tions. Furthermore, the data
is used to detect and rectify
malfunctions and to enable the
vehicle manufacturer to optim-
ise vehicle functions.
The vast majority of this data
is non-permanent and is only
processed in the vehicle it-
self. Only a small amount of
the data is stored in incident or

9
fault memories as required by
events.
If services are accessed, for
example repairs, service pro-
cesses, warranty cases and
quality assurance measures,
this technical information can
be read out of the vehicle to-
gether with the vehicle identi-
fication number.
The information can be read
out by a BMW Motorrad
retailer or another qualified
service partner or specialist
workshop. The legally stip-
ulated socket for on-board
diagnosis (OBD) in the vehicle
is used to read out the data.
The data is obtained, pro-
cessed and used by the
relevant parts of the retailer
network. The data is used
to document the technical
conditions of the vehicle, to
help with error localization,
to comply with warranty
obligations and to improve
quality.
In addition, the manufacturer
has various product monitor-
ing obligations arising from
product liability legislation. To
meet these obligations, the
vehicle manufacturer requires
technical data from the vehicle.
The data from the vehicle can
also be used to check warranty
claims from the customer.
Error and incident memories in
the vehicle can be reset during
servicing or repair work by a
BMW Motorrad retailer or an-
other qualified service partner
or specialist workshop.
Data input and data transfer
in the vehicle
General
Depending on the equipment,
comfort and customised
settings can be stored in the
vehicle and can be changed or
reset at any time.
If required, data can be entered
in the entertainment and
communication system of the
vehicle, for example using a
smartphone.
Depending on the individual
equipment, this includes:
Multimedia data, such as mu-
sic for playback
Contacts data for use in con-
nection with a communication
system or an integrated navig-
ation system
Entered destinations
Data on the use of internet
services. This data can be
stored locally in the vehicle
or is located on a device that
is connected to the vehicle,

10 GENERAL INSTRUCTIONS
for example smartphone, USB
stick, MP3 player. If this data
is stored in the vehicle, the
data can be deleted at any
time.
This data is transferred to third
parties only if personally re-
quested within the context of
using online services. This de-
pends on the selected settings
when using the services.
Incorporation of mobile
devices
Depending on the equipment,
mobile devices connected to
the vehicle, for example smart-
phones, can be controlled using
the operating elements of the
vehicle.
The image and sound of the
mobile device can then be out-
put via the multimedia system.
At the same time, specific in-
formation is transferred to the
mobile device. Depending on
the type of integration, this in-
cludes, for example, position
data and additional general
vehicle information. This en-
ables optimal use of the selec-
ted apps, for example naviga-
tion or music playback.
The type of additional data pro-
cessing is determined by the
provider of the respective app.
The scope of the possible set-
tings depends on the corres-
ponding app and the operating
system of the mobile device.
Services
General
If the vehicle has a wireless
connection, this enables the
exchange of data between
the vehicle and other systems.
The wireless connection
is enabled by the vehicle's
own transceiver unit or
using personally integrated
mobile devices, for example
smartphones. Online functions
can be accessed through this
wireless connection. These
include online services and
apps that are provided by the
vehicle manufacturer or by
other providers.
Services of the vehicle
manufacturer
For online services of the
vehicle manufacturer, the
individual functions are
described at suitable points,
for example rider's manual,
website of the manufacturer.
At the same time, information
is also provided on the
relevant data protection law.
Personal data may be used to
provide online services. Data

11
is exchanged using a secure
connection, for example with
the IT systems provided by the
vehicle manufacturer.
Obtaining, processing and us-
ing personal data outside of
the normal provision of ser-
vices requires legal permission,
contractual agreement or con-
sent. It is also possible to have
the entire data connection ac-
tivated or deactivated. Stat-
utory functions are excluded
from this.
Services from other providers
When using online services
from other providers, these
services are subject to the re-
sponsibility and the data pro-
tection and operating con-
ditions of the individual pro-
vider. The vehicle manufacturer
has no influence on the con-
tent that is exchanged in this
instance. Information on the
type, scope and purpose of the
data capture and use of per-
sonal data as part of the ser-
vices of third parties can be
ascertained from the individual
provider.

GENERAL VIEWS
02

GENERAL VIEW, LEFT SIDE 14
GENERAL VIEW, RIGHT SIDE 15
UNDER THE RIDER'S SEAT 16
MULTIFUNCTION SWITCH, LEFT 17
MULTIFUNCTION SWITCH, RIGHT 18
INSTRUMENT CLUSTER 19

14 GENERAL VIEWS
GENERAL VIEW, LEFT SIDE
1Rebound-stage damping,
front wheel ( 100)
Spring preload at front
wheel ( 97)
Compression-stage
damping, front wheel
( 100)
2Compression-stage
damping, rear wheel
( 101)
Spring preload at rear
wheel ( 98)
3Lock for tail-hump cover
( 63)
4Tyre pressures table
Chain settings
5Rebound-stage damping,
rear wheel ( 101)
6Rider footrest
7Steering damper ( 96)