Boar GTJ-B15V1 User manual

User Manual
Vertical Handheld Garment Steamer
GTJ-B15V1
Please read and save the inistruction to ensure safe and
effective use of this appliance.

Product Review
Hanger Head
Steam Head
Hanger Rod
Steam Button
Machine
Water Tank
Anti Scalding Gloves Ironing Board (Optional)

Control Panel
Precauctions
Indicator Light
Control Panel Operation Instructions
Safety Instructions
Gear
Gear 3
Control Knob
(Turn to select gear)
OFF
Gear 1
Gear 2
Turn the knob clockwise to start. For the first heating for each
startup, it is needs to preheat for a few seconds before steam
ejection.
The adjustment knob can be selected in different gears.
Gear 1 is recommended for silk and chemical fiber fabrics and
clothes;
Gear 2 is recommended for clothes made of cotton and hemp;
Gear 3 is recommended for woolen and plush clothes.
Please read this instructions carefully and retain for future reference.
Incorrect use without compliance with safety warnings may result in
accident safety.
Do not connect this appliance directly to a DC power source.
Do not disassemble by yourself. Disassembly and repair are not
allowed except for professionals, otherwise it may cause fire, electric
shock and personal injury.
Do not use other high-power appliances on the same socket to avoid
circuit overload.
Please go to the after-sales service center designated by our company
for repair.
Do not let children operate and use the product alone. All appliances
should be placed in a place that can not be touched by infants or
incapacitated people to avoid electric shock, scratch and other
hazards.

The appliance must be used and set aside on a stable surface.
Do not use if appliances with obvious damger or leakage after falling.
Please check the plug and power cord before connect the power cord.
If the power cord is damaged, it must be replaced by the manufacturer,
its repair or similar professionals to avoid danger.
Please ensure that the power plug is dry before use.
The maximum weight load of the product should not exceed 4kg.
Please lift the machine before moving the product. It is forbidden to
pull the power cord and steam pipe.
Do not use the product in a high place, such as a table or chair.
Please ensure that the whole machine is flat and stable before
operation. To prevent the machine from overturning or water overflow.
Before start to use, ensure the hanger rods are fully assembled: put
the steam head on the steam head frame. Preheat the steam guide
pipe and place correctly. Do not fold the tube for use.
Do not use this product for purposes other than the ironing of clothes.
Do not leave while the machine is powered on.
Do not heat when the water volume is insufficient.
Unplug the power cord before add water.
While use, please pay attention to the appliance to prevent the danger
of steam splashing. Do not turn the steam outlet head towards people
to avoid scalding.
While use, the outlet is high temperature. Do not touch it to avoid
scald.
While use, will generate high temperature steam. Do not use it on
clothes with poor heat resistance (such as leather clothes), which will
cause deformation, discoloration. Do not perm the outlet to people to
avoid scald.
While use, do not contact the power cord with the heating surface of
the machine, such as: near the outlet perm and the guide pipe.
It is normal for the appliance to make a "purr" sound occasionally.
Straighten the guide pipe upward to ensure smooth steam outlet.

Basic Operation Steps
Install the hanger rod
Insert Tighten
During the appliance operation, do not bend or wrap the pipe exces-
sively or keep the pipe in U-shaped state for a long time.
Please unplug the power cord plug after use.
When plugging and unplug, please hold the plug, do not pull the power
cord or wet hand operation.
Before collecting the product, make sure the product has cooled and
drain water from the machine.
This product does not consider the following situation:
a. Use the appliance by unattended infant and the disabled.
b. Infant playing appliances.
As shown, the height can be adjusted by splicing different numbers of
support rods, and installed it in turn.

Insert Insert
Tighten
Instell the hanger head
As shown, screw the hanger assembly into the top of the hanger rod.
Instell the ironing board (Optional)
The ironing board assembly is an optional accessory, the product you
buy may be different from the instruction diagram, please refer to the
physical object.
Hanging Ironing Mode
Unscrew the
hanger head
Put the ironing
assembly into
the rod
Screw the ironing frame
into the hanger rod
Screw the nut to fix the ironing
board on the hanger frame

Ironing Mode
Preparation before operation
Ironing Mode
Unsrew the head
frame, and adjust
the hanger rod to
appropiate height.
Adjust the angle of the
garment board assembly to
the horizontal, and screw the
nut to fix the board.
a. Hang up the cloth
to be ironed.
c. Put the water tank
back on the
appliance and plug
in the power.
b. Add water to the water
tank. In order to prolong
the service life of the
appliance, it is recom-
mended to use purified
water or distilled water.
Fix the ironing board
on the hanger rod

Specifications
Start Ironing
a. After the plug in the power, turn the knob to choose the gear, the
appliance enters the heating state, need to wait for a while after the
steam ejection.
b. During operation, the guide pipe works as vertically as possible, do not
bend.
c. During operation, do not hang the ironing head on the clothes hanger
or ironing board to do steam work to prevent scald.
Product Name
Model
Voltage
Frequency
Power
Capacity
Product Diemensions
Accessories Anti Scalding Gloves Anti Scalding Gloves
+ Ironing Board
Vertical Handheld Garment Steamer

Cleaning and Maintenance
1. Do not clean with the strong volatile solvent.
2. Do not put chemicals in the water tank.
3. Do not wash the cloth cover of ironing board with other clothes.
4. Do not immerse the product in water or with other containers for
cleaning.
5. Do not put vinegar, cleanser essence, saline solution and other
chemicals into the water tank.
6. During filling and cleaning, remember to unplug the power.
7. When descaling the machine, do not use corrosive liquid to clean it to
avoid affecting the safe use of the machine.
8. During the machine storage, do not bend the conductor pipe; And drain
the water in the steam pipe to avoid the water gushing from the steam
port of the ironing head when used again.
9. After power off and cooling for 30 minutes, move the machine to a
suitable drainage place, turn and pull out the drainage plug to drain the
water in the machine. When storing the machine for a long time, it is
necessary to drain the water inside the machine after use, which can
extend the service life of the product.

Frequently Asked Questions
Failure
No response
at startup
No steam
at startup
Water leakage
Failure
Product circuit failure
Home circuit failure
or fuse burned
The power plug is
not inserted
Failure
No water or too little
water in the water tank
Steam guide pipe is
bent
Heating plate is
damaged
Whole machine inside
leaks and overflows from
the bottom of the base
Ask professionals to check
and repair
Ask professionals to check and
repair
Insert the power plug
Fill water in
the water tank
Place the steam guide pipe in
a vertical position
Ask professionals to
check and repair
Ask professionals to
check and repair
Fold the steam back and
straighten the bend. Clean the
scale in the heating plate
Water tank overflows at
the connection with the
machine
Notice: If reviewed the above situations and still cannot solve the problem,
please contact our hotline. It is strictly prohibited for non-professional
individuals to disassemble or assemble the product.