Bob's Discount Furniture DIVA UPHOLSTERED HEADBOARD User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
DIVA UPHOLSTERED HEADBOARD
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
HARDWARE LIST
A (16) M8*50mm Bolts
B (16) M8 Spring Washers
C (20) M8 Flat Washers
D (4) M8 Nuts
E (1) Ø 5 Allen Wrench
F (1) Ø 5 Open Wrench
PARTS LIST
G (1) Headboard Panel
H (2) Headboard Legs
I (2) Side Panels
QTYPART HARDWARE QTYPART HARDWARE
1E 1F
20C 4D
16A 16B
G
H
H
I
I
FIGURE 1
FIGURE 2
FIGURE 3
G
I
I
H
G
STEP 1 - Figure 1
Attach the Headboard Legs (H) to Headboard (G) using 2 Allen Bolts (A),
2 Spring Washers (B) and 2 Flat Washers (C) from the back of the leg.
STEP 2 - Figure 2
Secure Side Panels (I) to Headboard Legs (H) from the back using 2 Allen
Bolts (A), 2 Spring Washers (B) and 2 Flat Washers (C) on each side.
STEP 3 - Figure 3
Secure the Side Panels (I) to Headboard (G) from the back using 2 Allen
Bolts (A), 2 Spring Washers (B) and 2 Flat
Washers (C) on each side. Tighten all bolts
with Allen Wrench (E) provided.
AA
A
A
A
B
B
B
B
B
B
B
C
C
A
A
A
A
C
C
C
C
C
C
C
C
H
STEP 4 - Figure 4
Attach side rails (sold separately) onto Headboard Legs (H) with 2 Bolts (A) 2
Flat Washers (C) from the front and 2 Flat Washers (C), 2 Spring Washers (B)
and 2 Nuts (D) from the back.Tighten all bolts with Allen Wrench (E) provided.
The Bed Frame is not
included. Sold Separately.
Holes for
Cal-King
Holes
for
Metal
Frame
H
AA
B
B
C
C
C
C
D
D
FIGURE 4

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that
all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is
required.
UPHOLSTERED DIVA KING SIDE RAIL
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
STEP 1 - Figure 1
Begin assembly by attaching the Adjustable Feet (D) to the Support Legs (G) by screwing
them into place.
STEP 2 - Figure 2
Next attach the Support Legs (G) to the Slats (E) using 1 Allen Bolt (A) from the top
of each slat. Tighten bolts with Allen Wrench (C) provided.
STEP 3 - Figure 3
Finally attach the Slats (E) to Side Rails (F)
using 1 Screw (B) per side. Tighten screws
with Philips head screwdriver (not included).
HARDWARE LIST
A (6) M8*30 Allen Bolts
B (6) 4*30 Screws
C (1) Ø5 Allen Wrench
D (6) Adjustable Feet
PARTS LIST
E (3) Slats
F (2) Side Rails
G (6) Support Legs
QTYPART
6A
1C
HARDWARE QTYPART HARDWARE
6
6
B
D
DD
FIGURE 1 GAA
E
FIGURE 2
G
BB
F
FIGURE 3
F
G
G
G
GG
G
E
E
E
F

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
DIVA UPHOLSTERED FOOTBOARD
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
HARDWARE LIST
A (4) M8*50mm Bolts
B (4) M8 Spring Washers
C (4) M8 Flat Washers
D (1) Ø 5 Allen Wrench
PARTS LIST
E (1) Footboard
F (2) Feet
QTYPART
4A
4C
HARDWARE QTYPART HARDWARE
4
1
B
D
E
CC
AA
B
B
STEP 1
Begin assembly by inserting Feet (F) into Footboard (E) and screwing them into place.
STEP 2
Attach Footboard (E) to side rails (not
included) using 2 Bolts (A), 2 Spring
Washers (B) and 2 Flat Washers (C)
per side. Tighten all bolts with Allen
Wrench (D) provided.
E
F
F