BodiMetrics O2 Vibe User manual

O2Vibe Fitness &
Sleep Monitor
Quick Start Guide
BodiMetrics LLC
1601 N.Sepulveda Blvd., Suite 839
Manhattan Beach, California 90266
www.BodiMetrics.com
Toll Free: [phone]
The O2Vibe monitor has two modes: Sleep and Fitness.
Both modes offer continuous blood oxygen saturation
(SpO2) and heart rate. Both also have customizable
vibrating alerts to remind you to walk to meet your step
goals or wake you if your SpO2 drops below the threshold
you set. The O2Vibe tracks SpO2, Heart Rate, and Motion
during Sleep and Steps during light exercise to help you
live a healthy lifestyle
This product is not a medical device and should
not be used to diagnose or treat any medical
condition.
Package contents
(1) O2Vibe Main Unit
(1) USB Thumb Ring Sensor
(1) USB Charging Cable (Micro D)
(1) Quick Start Guide
Using O2Vibe
Charge the battery before the first use
Connect the device to the USB port of your computer
using the provided USB Charging Cable until fully charged;
typically less than 2 hours to fully charge.
Install O2Vibe Application
Search Apple (iOS devices) or Google (Android devices)
Stores for free O2Vibe application and download to your
mobile phone; iPad or Tablet.
Set preferences and view results via APP
You can switch on/off vibration, adjust intensity and
threshold (SpO2) of vibration in the app. After each
measurement or when you turn on the device, the results
can be provided in the APP on your phone via Bluetooth.
Turn on the Bluetooth of your phone, enter the O2Vibe
app and choose the right device, then the device and your
phone will connect successfully.
Note: The device Bluetooth will automatically turn on
within the first 2 minutes. Or it turns on after the
measurement completes until power is off.
How it works
1. Put your O2Vibe on your wrist.
2. Connect the ring sensor to the connector on
the device.
3. Slide the ring sensor onto your thumb as
pictured or other finger if it does fit well on your
thumb.
4. Press the button to turn on the device; then press
button again to change the operation mode (Sleep or
Fitness) you desire. After a few seconds, your readings will
begin appearing on the screen.
About device screens
SpO2 Oxygen saturation
Heart rate
Insert USB Thumb Sensor into O2Vibe port
Slide your finger into the sensor
Sleep Score and number of times SpO2 dropped below
threshold set.
Operation mode navigation
The O2Vibe has 2 operation modes, Sleep Mode and
Fitness Mode, press the button can switch between this
two modes within seconds after power is on.
Sleep Mode
Screen will be dark until you Press button on the side of the
O2Vibe to wake up the application to show status of
measurement and results. The screen will go dark after a
few seconds of no operation.
Fitness Mode
Screen is Always On; Press the button to change display to
show various measurements and results including steps,
HR and SpO2 metrics.
Power on/off process
Press and hold the button for 1 second to power on the
device, 3 seconds to power off the device.
Sleep Score

Upgrade firmware
1. Turn on your O2Vibe.
2. Open the O2Vibe application on your mobile phone,
iPad or Tablet and choose your device listed to establish a
Bluetooth connection.
3. TouchDevice -> Device update -> Update in your O2Vibe
application and wait until update is complete.
Cloud
1. Touch the Cloud icon in the up right corner of the app,
and then create an account.
2. Sign in the O2Vibe app, fill in your account and user
profile.
3. Data can be synced with the Cloud once you set up your
profile. To share data or records you must set up an
account under your profile.
Troubleshooting
Specifications
How to contact us?
BodiMetrics LLC
1601 N Sepulveda Blvd, Suite 839
Manhattan Beach, Ca. 90266 U S A
www.BodiMetrics.com
Toll Free: [phone]
[email protected]