BodyTech Fitness MAGNECTIC BIKE User manual

OWNER SMANUAL
MAGNECTICBIKE
IMPORTANT!
Pleaseread all instructions carefullybeforeusingthis product.
Retainthismanualforfuturereference.

1
SAFETYINSTRUCTIONS
Basicprecautionsshouldalwaysbefollowed, including thefollowing safety
instructionswhenusing thisequipment:Readall instructionsbeforeusing this
equipment.
1.Read all the instructionsinthismanualanddowarmup exercisesbeforeusingthis
equipment.
2.Beforeexercise, inordertoavoidinjuringthe muscle,warm-up exerciseofevery
positionofthebodyisnecessary.RefertoWarmUpandCoolDownRoutine pages.
Afterexercise, relaxation of thebodyissuggestedforcool-down.
3.Pleasemakesureall partsarenot damaged and fixed well beforeuse.This
equipment shouldbeplaced on aflatsurfacewhen using.Usingamatorother
coveringmaterialontheground isrecommended.
4.Pleasewearproperclothesandshoeswhen usingthisequipment; do not wearclothes
thatmight catchanypart oftheequipment; remembertotightenthepedalingstraps.
5.Donotattemptanymaintenanceoradjustmentsotherthanthosedescribed inthis
manual.Shouldanyproblemsarise,discontinue useandconsultan Authorized
ServiceRepresentative.
6.Donotusetheequipmentoutdoors.
7.Thisequipment isforhouseholduseonly.
8.Onlyone person shouldbeontheequipmentwhileinuse.
9.Keepchildrenandpetsawayfromthe equipment whileinuse.Thismachine is
designed foradultsonly.Theminimumfreespacerequired forsafeoperation isnot
less thantwometers.
10.If you feelanychestpains, nausea,dizziness, orshortofbreath, you shouldstop
exercisingimmediatelyandconsult yourphysician beforecontinuing.
11.Themaximumweight capacityforthisproduct is110 kgs.
WARNING:Beforebeginning anyexercise programconsultyour physician.
Thisisespeciallyimportantfor thepersonswho areover35 yearsoldor who have
pre-existing healthproblems.Readallinstructionsbeforeusing anyfitness
equipment.
CAUTION:Readallinstructionscarefullybeforeoperating thisproduct.
RetainthisOwner sManual for futurereference.

2
OVERVIEWDRAWING

3
PARTS LIST
No.
Description Qty
No.
Description Qty
001ScrewST4.2 25 6030RoundKnob M16 1
002Pan Head PhillipsSelfDrilling
ScrewST4.2x25 8031Seat PostBushing 1
003CoverCap 2 032Seat PostCover 1
004Left ChainCover 1033Hexagon NutM10 2
005 Turntable 2034Eyebolt M6x36 2
006ScrewST4.2 10 14
035UBracket 2
007Right ChainCover 1036Spring Ø6 2
008 Plasticstud 2037NutM6 2
009End CapForRearStabilizer 2038Flywheel Ф250 1
010RearStabilizer 1039Nylon Nut M8 3
011Bolt M8x70 2040Eyebolt M8x85 1
012BigCurveWasher Ø8 4 041BigWasherФ8xФ20x2.0 4
013Front Stabilizer 1042Bolt M8x20 1
014End CapForFront Stabilizer 2043Pressing 1
015Cap Nut M8 2044 IdleWheel1
016Hexagon Nut 7/8" 1045WasherФ6xФ12x1.0 1
017Washer Ø23xØ34.5x2.5 1 046Bolt M6X10 1
018BearingNut II 7/8" 1047Seat CushionDD-982AT 1
019 ball bearing 2 048Seat SlidingTube 1
020BearingCup 2049Nylon Nut M8 3
021BearingNut I15/16" 1050Seat SlidingTube EndCap 2
022Washer Ø24xØ40x3.0 1051 Limit seatassembly 1
023Belt PulleywithCrank Ø260 1052Seat Post 1
024Belt PJ380 J6 1053WasherФ10xФ20x2.0 1
025Right Pedal1054 Screwnut M10 1
026TensionCableL=1300mm 1055HandlebarPost Cover 1
027MainFrame 1056Extension SensorWire
(L=1000mm) 1
028SensorwithWireL=1100m 1057Bolt M8x15 6
029ScrewST2.9 12 2058TensionControlKnob 1

4
PARTS LIST
No.
Description Qty
No.
Description Qty
059HandlebarPost 1067ScrewST4.2 20 2
060Bolt M5X10 4068HandlebarFoamGrip 2
061BigCurveWasher Ø5 1069Bolt M8x70 2
062Bolt M5X55 1070ScrewST2.9 16 1
063Computer 1071Left Pedal1
064End CapforHandlebar 2072WasherФ8xФ16x1.5 8
065Handlebar 1
066Hand PulseSensorwithWire
L=750mm 2

5
HARDWARE PACKINGLIST
(11)Bolt M8x70 2PCS
TOOLS
(69)Bolt M8x70
2PCS
(12)BigCurveWasher Ø8
4PCS
(15)Cap NutM8
2PCS

6
ASSEMBLYINSTRUCTIONS
1.Frontand RearStabilizersInstallation
Position theFront Stabilizer(13)infrontoftheMainFrame(27)andalignbolt holes.
Attachthe Front Stabilizer(13)ontothe front curveoftheMainFrame(27)withtwoM8x70
Bolts(69), two Ø8BigCurveWashers(12),and twoM8CapNuts(15).
Position theRearStabilizer(10)behind the MainFrame(27)andalignbolt holes.
Attachthe RearStabilizer(10)ontothe rearcurveoftheMainFrame(27)withtwoM8x70
Bolts(69), two Ø8BigCurveWashers(12).
FootPedalsInstallation
TheCranks, FootPedals,PedalShaftsandPedalStrapsaremarked “R”for Rightand
“L”for Left.
Insert the pedalshaftof Left FootPedal(71) intothreadedholeintheleft Crank.Turn
the pedalshaft byhandinthe counter-clockwisedirectionuntil snug.
Note:DO NOTturn thepedalshaftintheclockwisedirection, doing sowill stripthe
threads.
Screwdriverprovided Insert pedalshaftofRight FootPedal(25)intothreadedholeinright
CrankTurnthepedalshaft byhand intheclockwisedirection until snug.

7
2. SeatPost,SeatPostCover, SeatCushion, and SeatSlidingTubeInstallation
Slide theSeatPostCover(32)ontothe tubeoftheMainFrame(27).Insertthe Seat Post
intothe SeatPost Bushing(31)on thetube oftheMainFrame(27)and thenattachthe
Seat PostKnob (30)ontothe tubeof theMainFrame(27)byturning it inaclockwise
direction withMultiHexToolprovided tolockthe SeatPost inthe suitableposition.
RemovethreebigWasher Ф8(41)andthree nylon Nut M8(49)fromunderside of
the SeatCushion(47).Removenylon nutsand washerswiththeMultiHexToolwith
PhillipsScrewdriverprovided.GuideboltsonundersideoftheSeat Cushion(47)through
holeson top ofthe Seat SlidingTube(48),attachwiththree bigWasherФ8*Ф20*2.0(41)
and threenylon Nut M8(49).Tighten nylon nutsandwasherswiththe MultiHexToolwith
PhillipsScrewdriverprovided.
Guide the SeatSlidingTubeBolton underside oftheSeatSlidingTube (48)throughholeon
top ofthe SeatPost (52), attachwithone WasherФ8(53) andSeat Screwnut M10 54）

8
3. HandlebarPost, HandlebarPostCover,and Tension Control Knob Installation
RemovefourM8x15 Bolts(57), four Ø20xØ8x2.0Washers(12)fromthe MainFrame(27).
RemoveboltswiththeS6 Allen Wrenchprovided.
Slide theHandlebarPost Cover(55)uptotheHandlebarPost (59).
Insert the TensionCable(26)throughintothe bottomholeofHandlebarPost (59)and pull it
outfromthesquareholeofHandlebarPost (59).
Connect theSensorWire(28)fromtheMainFrame(27)totheExtension SensorWire(56)
fromthe HandlebarPost (59).
Insert the HandlebarPost (59)ontothetubeoftheMainFrame(27)andsecurewithfour
M8x15 Bolts(57),four Ø20xØ8x2.0Washers(12)that wereremoved.Tightenboltswith
the S6Allen Wrenchprovided.
Slide theHandlebarPost Cover(55)downtothe HandlebarPost (59).
Removethe M5x55 Bolt (62) and Ø5x Ø15 x1.0BigWasher(61) fromthe Tension Control
Knob(58).Removebolt withthe MultiHexToolwithPhillipsScrewdriverprovided.
Put the cableendof resistancecableofTension ControlKnob (54)intothe springhookof
TensionCable(26)asshownindrawingA offigure3.Pull theresistancecableofTension
ControlKnob (58)upand forceit intothe gapofmetalbracketofTension Cable(26)as
shownindrawingB offigure3.AttachtheTensionControlKnob(58)ontotheHandlebar
Post (59)withthe M5x55 Bolt (62) and Ø5x Ø15 x1.0BigWasher(61) that wereremoved.
Tighten bolt withtheMultiHexToolwithPhillipsScrewdriverprovided.

9
4. Computer, HandlebarInstallation,
RemovefourM5x10 Bolts(60)fromtheComputer(63). Removeboltswiththe MultiHex
ToolwithPhillipsScrewdriverprovided. Connect the HandPulseSensorWires(66)and
Extension SensorWire(56)tothewiresthat comefromtheComputer(63).Tuckwiresinto
the HandlebarPost (59).Attachthe Computer(63)ontothetop endoftheHandlebarPost
(59)withfourM5x10 Bolts(60)thatwereremoved.TightenboltswiththeMultiHexToolwith
PhillipsScrewdriverprovided
RemovetwoM8x15 Bolts(57)andtwo Ø16xØ8x1.5CurveWashers(72) fromthe
HandlebarPost (59). RemoveboltswiththeS6Allen Wrenchprovided.
Insert the Hand PulseSensorWires(66)intothe holeon the HandlebarPost (59)and then
pull themout fromthetop end ofthe HandlebarPost (59).
Attachthe Handlebar(65)ontothe HandlebarPost (59)withtwoM8x15 Bolts(57)andtwo
Ø16xØ8x1.5CurveWashers(72) that wereremoved.Tightenboltswiththe S6Allen
Wrenchprovided.
.

10
Howtoadjustthe seat’sheight:
a. turntheknobaboutthree
circlesintheanti-clockwise
direction.
b. one handpullstheknob out
at all timeandtheotherhand
movestheseatposttothe
desired place.
c. maketheknob inthedesired
placeand turnittightinthe
clockwisedirection
Getthedesireddistance betweenthe
handlebar and thesaddlebyadjusting
theknob
1
2
3
4
5
6
7
8
T
E
N
S
I
O
N
a
b
c

11
COMPUTERINSTRUCTIONMANUAL
FUNCTIONALBUTTONS:
MODE- Push down forselectingfunctions.
SET- To setthevalues oftime distance calories and pulsewhennotin scan mode.
RESET- Push down forresettingtime distance and calories.
FUNCTIONANDOPERATIONS:
1.SCAN: Press MODE”button until SCAN”appears, monitorwill rotatethroughall the5
functions:Time speed distance calorieODOand pulse. Each displaywill behold 4
seconds.
2.TIME: (1)Countthetotaltimefromexercisestartto end. (2)Press MODE”button until
TIME”appears, press SET”button to setexercisetime.When the set”is zero, the
computer will alarm15 seconds.
3.SPEED: Displaycurrentspeed.
4.DIST: (1)Countthedistance fromexercisestartto end.
(2)Press MODE”button until DIST”appears. Press SET”button to setexercisedistance.
When the set”is zero, thecomputer will alarm15 seconds.
5.CALORIES:(1)Countthetotalcalories fromexercisestartto end.
(2)Press MODE”button unit CAL”appears. Press SET”button to set
exercisecalories. When the set”is zero, thecomputer will alarm15 seconds.
6. ODO：Monitorwill displaythetotalaccumulated distance.
7. PULSE: Press MODEbutton until PULSE”appears. Before measuringyourpulserate, please
place yourpalms ofyourhands on Both ofyourcontactpads and themonitorwill showyour
currentheartbeatrateinbeats per minute(BPM)on theLCDafter 6~7 seconds. Remark:
Duringtheprocess ofpulsemeasurement, becauseofthecontactjamming,themeasurement
valuemaybehigherthanthevirtualpulserateduringthefirst2~3 seconds,then will return
to normallevel.Themeasurementvaluecan notberegardedas thebasis ofmedical
treatment.
NOTE
1. Ifthedisplayis faintorshows no figures ,pleasereplace thebatteries.
2. Themonitorwill automaticallyshutoffifthereis no signalreceived after 4 minutes .
3. Themonitorwill beauto-powered on when startingto exercisepush button w/signalin.
4. Themonitorwill automaticallystartcalculatingwhenyou startto exerciseand
will stop calculatingwhenyou stop exercisingfor4 seconds .

12
MAINTENANCE
Cleaning
Theupright bikecanbecleaned withasoft clothandmilddetergent.Donotuseabrasives
orsolventsonplasticparts.Pleasewipe yourperspirationoff theupright bikeaftereach
use.Becarefulnot get excessivemoistureon the computerdisplaypanelasthismight
causean electricalhazardorelectronics tofail.
Pleasekeeptheupright bike, specially, thecomputerconsole,out ofdirect sunlight to
prevent screendamage.
Pleaseinspect all assemblyboltsand pedalson the machine forpropertightnessevery
week.
Storage
Storethe upright bikeinaclean anddryenvironmentawayfromchildren.
TROUBLESHOOTING
PROBLEM SOLUTION
Theupright bikewobbleswhen inuse. Turntheadjustableleveleron therear
stabilizerasneeded tolevelthe upright bike.
Thereisnodisplayon the computer
console.
1.Removethecomputerconsoleandverify
the wiresthat comefromthe computer
consoleareproperlyconnectedtothe
wiresthat comefromthe handlebarpost.
2.Check ifthe batteriesarecorrectly
positioned andbatteryspringsarein
propercontact withbatteries.
3.Thebatteriesinthecomputerconsole
may
be dead.Changetonewbatteries.
Thereisnoheart ratereadingorheart rate
readingoriserratic/inconsistent.
1.Makesurethat thewireconnectionsfor
the handpulsesensorsaresecure.
2.Toensurethe pulsereadout ismore
precise, pleasealwaysholdon tothe
handlebargripsensorswithtwohands
insteadof just withone handonlywhen
you trytotest yourheart ratefigures.
3.Grippingthe hand pulsesensors
tootight.
Trytomaintainmoderatepressurewhile
holdingontothe hand pulsesensors.
Theupright bikemakesasqueakingnoise
when inuse. Theboltsmaybe looseontheupright bike, pleaseinspect theboltsandtightentheloose
bolts.

13
Warm UpExercises
Asuccessfulexerciseprogramconsistsofawarm-up, aerobicexercise, andacool-down.
Dotheentireprogramat least twoandpreferablythree timesaweek, restingforaday
between workouts.Afterseveralmonths,you can increaseyourworkoutstofourorfive
timesperweek.
Warmingupisanimportantpart of yourworkout, andshouldbegineverysession. It
preparesyourbodyformorestrenuousexercisebyheatingup andstretchingout your
muscles,increasingyourcirculation andpulserate,anddeliveringmoreoxygen toyour
muscles.Atthe end ofyourworkout, repeattheseexercisestoreducesoremuscleproblems.
Wesuggest the followingwarm-up andcool-downexercises:
Inner ThighStretch
Sit withthe solesof yourfeettogetherwithyourkneespointing
outward. Pull yourfeetascloseintoyourgroinaspossible.
Gentlypushyourkneestowardsthe floor. Holdfor15counts.
Hamstring Stretch
Sit withyourright legextended.Rest the soleofyourleft
foot
againstyourrightinnerthigh.Stretchtowardyourtoeasfar
aspossible. Holdfor15counts. Relaxandthen repeatwith
left legextended.
Head Roll
Rotateyourhead totheright forone count,feeling
the stretchup the leftside of yourneck. Next, rotate
yourhead back foronecount, stretchingyourchinto
the ceilingand lettingyourmouthopen. Rotateyour
headtotheleftforone count, and finally, dropyour
headtoyourchestforone count.

14
Calf-AchillesStretch
Leanagainstawall withyourleft leginfront oftheright
and yourarmsforward. Keepyourright legstraight and
the leftfoot onthefloor; thenbendtheleft legand lean
forwardbymovingyourhipstowardthe wall. Hold, and
thenrepeaton the otherside for15counts.
ShoulderLift
Lift yourright shoulderup towardyourearforone count.
Then lift yourleft shoulderupforonecount asyou lower
yourright shoulder.
ToeTouch
Slowlybend forwardfromyourwaist, lettingyourback
and shouldersrelaxasyou stretchtowardyourtoes.
Reachdownasfarasyou can and holdfor15counts.
Side Stretch
Openyourarmstothe side and continue lifting them
until theyareoveryourhead.Reachyourrightarmas
farupwardtowardtheceilingasyou can forone
count. Feelthestretchup yourright side. Repeat this
action withyourleftarm.