BOERPLAY BPKE261.6KP User manual

Multi-play equipment
BPKE261.6KP
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Hoofdafmetingen Main dimensions
* Vloerhoogte (Floor height)
0,95 m *
0,00 m
0,95 m
2,40 m
0,00 m 0,14 m 0,71 m 1,87 m 2,45 m 2,53 m
0,00 m
0,54 m
1,12 m
2,48 m
0,59 m *
0,00 m
0,59 m
1,41 m
< 0.,20 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
5,59 m
5,09 m
5,40 m
4,77 m
R1,50m
R1,50m
1,05 m 0,50 m
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Bodemplan Groundplan
Grondmarkering
Ground level marker
0,52 m 0,40 m
1,54 m 0,58 m 1,16 m 0,58 m 1,54 m
0,29 m
2,11 m0,58 m1,41 m1,50 m
0,55 m
0,27 m 0,40 m
0,50 m
0,74 m
0,91 m
0,30 m
0,20 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#Nr.
Basic Play Kidstaander 0,59m
AK
001
BPK
MOD
41
Basic Play Kidstaander 0,95m
AK
002
BPK
MOD
4
2
Basic Play KidsVloer
A004BPKMOD23
Basic Play KidsDak
G005BPKMOD14
Basic Play KidsGlijbaan polyester 0,95m
DG007BPKMOD15
Basic Play KidsRailing HMPE blanco G008
BPK
MOD26
Basic Play KidsWand schoolbord
A
G014
BPK
MOD1
7
Basic Play KidsWand OXO
CG015BPKMOD18
Basic Play Kids
Wand schuifspel
G016BPKMOD19
Basic Play KidsLoket
G031BPKMOD110
Basic Play KidsTelbollen
G032
BPK
MOD
111
Basic Play Kidstijgbrug vormen
B
G038
BPK
MOD112
Basic Play KidsTrap 0,95m
A
G044
BPK
MOD
1
13
Basic Play KidsOploopwand schuin
A
G045
BPK
MOD
114
Basic Play KidsPaalkap 80x80
G053
BPK
MOD
4
15
Geleverde modules:
Zie tabel
Montageinstru tie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven spe ifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, et .)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Bouw twee keer een toren op uit 1/2(+15), 3 en 6
3 - Assembleer de overige modules (op 5 na) met behulp van de moduletekeningen
4 - Plaats de plaat van 5, verbind deze aan twee keer 1
5 - Plaats de glijbaan van 5, verbind deze aan de plaat
6 - Plaats 7, 8, 9, 10, 11, 13 en 14, verbind deze aan twee keer 1/2
7 - Plaats 12, verbind deze tusssen twee torens aan vier keer 1/2
8 - Plaats 4, verbind deze aan vier keer 2
9 - Plaats het typeplaatje op de aangegeven positie
10 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
11 - Di ht de gaten en verdi ht het zand
Controles:
1 - Corre te opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instru tion:
- The main dimensions indi ate the dimensions of the posts and floors
- The detailed dimensions show the spe ifi dimensions of the onne tions
- The modules whi h ontain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top ( limbing walls, aps for the posts, et .)
Assembly sequen e:
1 - Dig the holes a ording to the ground plan
2 - Assemble two towers out of 1/2(+15), 3 and 6
3 - Assemble the remaining modules (ex ept for 5) using the module drawings
4 - Pla e the panel of 5, atta h it to two times 1
5 - Pla e the slide of 5, atta h it to the panel
6 - Pla e 7, 8, 9, 10, 11, 13 and 14, atta h them to two times 1/2
7 - Pla e 12, atta h it between two towers to four times 1/2
8 - Pla e 4, atta h it to four times 2
9 - Atta h the identifi ation plate to the designated spot
10 - Che k that the equipment onforms to the dimensions shown on sheet 'dimensions'
11 - Close the holes and ompa t the sand
Che ks:
1 - Corre t assembly and all the fasteners
2 - Che k the dimensions of the safety area with regard to the play equipment
12 7
10
15
13
8
211
5
3 1 9
4
14
6
Typeplaatje
Identification plate
B

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Afmetingen Dimensions
Voor (Front)
Rechts (Right)
0,00 m
0,45 m
0,50 m
0,86 m
1,32 m
1,68 m
2,40 m
0,00 m
0,45 m
0,90 m
2,40 m
0,00 m
1,32 m
1,41 m
1,68 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Afmetingen Dimensions
Achter (Back)
Links (Left)
0,00 m
0,45 m
0,50 m
0,86 m
1,32 m
1,41 m
1,68 m
2,40 m
0,00 m
0,45 m
1,23 m
1,68 m
2,40 m
0,00 m
0,50 m
1,32 m
1,41 m
1,68 m

LOGBOOK
Type indication Basic Play
Article number BPKE261.6KP
Product Name Multi-play equipment
Maximum fall height 1,0 m
Construction year 2023
Certificate 148363
Inspection body Keurmerkinstituut
Groeneweg 2e, Zoetermeer
2718AA Zoetermeer
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain