BOERPLAY Climbing octagon User manual

Climbing octagon
PSTE000.119
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 119
Klimkubus
Achthoekig
29-7-2019
Hoofdafmetingen Main dimensions
0,00 m 2,43 m 3,29 m 4,48 m 5,31 m
0,00 m
0,88 m
2,04 m
2,92 m
0,00 m
1,45 m
2,40 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 119
Klimkubus
Achthoekig
29-7-2019
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
7,50 m
8,63 m
9,13 m
R1,50m
1,00 m 0,50 m
2,14m
2,14m
2,10m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 119
Klimkubus
Achthoekig
29-7-2019
Bodemplan Groundplan
0,92 m
0,60 m
0,25m
o
Grondmarkering
Ground level marker
0,61 m
500 1099 249 1935 3190 2154
2154 3190 2154
0,75 m
0,70 m
0,21m
0,50 m
0,11 m
0,43 m
0,41 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 119
Klimkubus
Achthoekig
29-7-2019
Modules Modules
OpmerkingBenamingRev.Bew.Volgnr.Progr.Type
#
Nr.
Basic PlayGlijbaan 145 cm
A007BBPMOD11
KlimkubusAchthoekig Frame 001016PSTMOD
1
2
KlimkubusSpiderweb
011016PSTMOD13
Klimkubus
WirwarA022016PSTMOD14
KlimkubusGlijstang
028016PSTMOD15
Klimkubusekstok
029016PSTMOD16
KlimkubusPalenladder
030016PSTMOD
17
KlimkubusKlimwand
031016PSTMOD18
KlimkubusTouwladder 256016PSTMOD
1
9
KlimkubusKlimtouw 257016PSTMOD
1
10
Adventure PlayToonbank / Zitbank
A
002029PSTMOD111
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zi n op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zi n bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Plaats 2
3 - Plaats 11, verbind deze aan 2
4 - Plaats 1, verbind deze aan 11
5 - Plaats 5, verbind aan 2
6 - Plaats 3, 4, 6, 7, 8 en 10, verbind deze aan 2
7 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
8 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Place 2
3 - Place 11, attach it to 2
4 - Place 1, attach it to 11
5 - Place 5, attach it to 2
6 - Place 3, 4, 6, 7, 8, and 10, attach it to 2
7 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
8 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment
7
3
2
109
8
5
4
6
1
Typeplaatje
Identification plate
B
11

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 119
Klimkubus
Achthoekig
29-7-2019
Afmetingen Dimensions
0,00 m
1,33 m
2,29 m
2,40 m
0,00 m
0,45 m
0,80 m
1,15 m
1,50 m
1,85 m
2,29 m
2,40 m
Voor
(Front)
echts
( ight)
0,00 m
1,45 m
0,59 m = =

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 119
Klimkubus
Achthoekig
29-7-2019
Afmetingen Dimensions
Achter
(Back)
Links
(Left)
0,00 m
1,80 m
2,17 m
= =
0,00 m
0,72 m
1,22 m
1,57 m
1,82 m
1,97 m
0,00 m
0,47 m
0,97 m
1,42 m
1,92 m

LOGBOOK
Type indication Adventure Play
Article number PSTE000.119
Product Name Climbing octagon
Maximum fall height 1,9 m
Construction year 2023
Certificate 064726
Inspection body TUV Nederland QA BV
Ekkersrijt 4401
5692 DL Son
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain