BOERPLAY Arena SOLE030.235 User manual

SOLE030.235
Arena

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 235
Arena
RVS
27-1-2017
BOER
SPEELTOESTELLEN
Afmetingen Dimensions
2,77m
2,62 m
0,00 m
0,22 m
0,43 m
0,56 m
1,02 m
1,17 m
1,35 m
0,00 m
0,30 m
0,42 m
0,56 m
1,05 m
1,17 m
1,34 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 235
Arena
RVS
27-1-2017
BOER
SPEELTOESTELLEN
Obstakelvrije zone Obstacle free zone
Obstakelvrij WAS
Obstacle free WAS
Opvangzone
Impact area
Obstakelvrij EN-1176
Obstacle free EN-1176
5,59m
5,03 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 235
Arena
RVS
27-1-2017
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,60 m
1,34 m 1,30 m 0,56 m 0,53 m 1,29 m
1,22m
1,08m
0,58m
1,04m
1,67m
1,83m
1,34m
2,42m
1,39 m 1,40 m 2,24 m
1,27m
0,64m
0,49m
rondmarkering
Ground le el marker

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 235
Arena
RVS
27-1-2017
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
Recht
ZitjeA
000323
PNR
MOD11
EnkelWokkel
00032PNRMOD22
VlakWebnet
600333PNRMOD13
11 cm
Duikelrek
00000
PNR
MOD3
4
98 cmStang 00006PNRMOD3
4
5
1
3
5
4
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
- Plaats 4(3x)
3 - Plaats 5(3x) en bevestig deze aan 4
4 - Plaats 1 en ( x) en bevestig deze aan 4
5 - Plaats 3 en bevestig deze op goede hoogte aan 4
6 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
7 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
- Controleer de afmetingen van de valbodem t.o.v. het toestel°
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
- Place 4(3x)
3 - Place 5(3x) and attach it to 4
4 - Place 1 and ( x) and attach it to 4
5 - Place 3 and attach it at right height to 4
6 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
7 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
- Check the dimensions of the safety area with regard to the play equipment

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Pioneer Play
Product code SOLE030.235
Name of equipment Pionier Arena
Maximum height of fall 1,2 m
Year of construction 2017
Certificate 100324976
inspection authority Liftinstituut B.V.
Buikslotermeerplein 381, A'dam - 1025 XE Amsterdam
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Arena
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
SOLE030.235
Arena

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PNR 323 000 A
Zitje
Recht
28-10-2013
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
M10 - RVS A2-70
Borgdopmoer
020010011BSR11
M10 x 30 - RVS A2-70
Verzonken out
030010024BSR22
M10SLUITRING 002010030BSR13
6 MM ROODOPVULDOPJE 030006DOPKST2
4
ZITJEZITPLAATA
010006
PNR
OPE1
5
EI 05
Su module
000005PNRSMD2
6
RechtBeugel zitje
F
320025
PNR
SME
17
6
7
5
4
2
4
2
3
1

WokkelWokkelbuis
B
320018
PNR
OME
1
2
EI 05Submodule 000005
PNR
SMD2
1
OPMERKINGBENAMING
RBE .NR.
PROJ.
TYPEN
POS
B
BB
Be
ee
en
nn
na
aa
am
mm
mi
ii
in
nn
ng
gg
g
Title
O
OO
Op
pp
pm
mm
me
ee
er
rr
rk
kk
ki
ii
in
nn
ng
gg
g
Comment
D
DD
Da
aa
at
tt
tu
uu
um
mm
m
Date
T
TT
Te
ee
ek
kk
ke
ee
en
nn
ni
ii
in
nn
ng
gg
g
Drawing
MOD PNR 325 000
Wokkel
Enkel
9-1-2009
BOER
S
SS
SP
PP
PE
EE
EE
EE
EL
LL
LT
TT
TO
OO
OE
EE
ES
SS
ST
TT
TE
EE
EL
LL
LL
LL
LE
EE
EN
NN
N
Samenstelling module Assembly module
1
2