BOERPLAY Playchain 308 User manual

PNRE000.308
Playchain 308

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 308
Playchain 308
Pionier
20-1-2017
BOER
SPEELTOESTELLEN
Obstakelvrije zone Obstacle free zone
Obstakelvrij WAS
Obstacle free WAS
Opvangzone
Impact area
Obstakelvrij EN-1176
Obstacle free EN-1176
10,35m
5,79 m
4,52m
4,52 m
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 308
Playchain 308
Pionier
20-1-2017
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,00 m
1,51 m
2,11 m
3,00 m
3,36 m
3,53 m
3,82 m
4,01 m
4,48 m
4,61 m
5,90 m
6,22 m
7,38 m
7,82 m
8,08 m
8,48 m
8,57 m
10,35 m
0,00m 1,52m 2,12m 3,01m 3,37m 3,54m 3,76m 4,16m 5,79m
0,00m 1,72m 1,87m 2,12m 2,26m 2,30m 2,57m 2,91m 3,23m 3,32m 3,54m 5,79m
0,60m
Grondmarkering
Ground level marker
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 308
Playchain 308
Pionier
20-1-2017
BOER
SPEELTOESTELLEN
A metingen imensions
0,00 m
0,25 m
0,31 m
0,57 m
0,91 m
1,02 m
1,15 m
1,37 m
2,78 m
7,31m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 308
Playchain 308
Pionier
20-1-2017
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
SpeelbuisKoppelstuk
000530
PNR
M D
7
1
SpeelbuisBasisstuk + lippen
000532PNRM D12
SpeelbuisHoekstuk 000533
PNR
M D23
Speelbuisbalanshoek
000536
PNR
M D1
4
buis 70Einddop
A000537PNRM D25
SpeelbuisSpringplank
B000540PNRM D16
SpeelbuisSpeelbollen x3
003543
PNR
M D1
7
SpeelbuisDuikel 90 cm 000
544PNR
M D18
SpeelbuisSchoolbord
A
000
545PNR
M D19
SpeelbuisBalansbalk
000548PNRM D110
SpeelbuisTelbollen
000550PNRM D111
SpeelbuisZithoek groot
A
000
555PNR
M D112
Speelbuis
Tafeltje
A000557PNRM D113
6
3
7
31
12
13
11
891
55
2
4

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
BOER
SPEELTOESTELLEN
Montage Mounting
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Plaats 1
3 - Plaats 3
4 - Verbind 3 met 1 aan 1
5 - Plaats 7
6 - Verbind 7 met 1 aan 3
7 - Plaats 3
8 - Verbind 3 met 1 aan 7
9 - Plaats 6
1 - Verbind 6 met 1 aan 3
11 - Plaats 4
12 - Verbind 4 met 1 aan 6
13 - Plaats 5 in einde buis 4
14 - Plaats 12
15 - Verbind 12 met 1 aan 1
16 - Plaats 2
17 - Verbind 2 met 1 aan 12
18 - Plaats 5 in einde buis 2
19 - Verbind 9 met 2
2 - Verbind 4 en 8 op de goede hoogte aan 2
21 - Plaats 13 in center van 12
22 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
23 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
3 - Zorg dat de uiteinden van de wip op de demper komen
4 - De uiterste hoogte van het uiteinde van de balk (<1 cm)
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Place 1
3 - Place 3
4 - Attach 3 with 1 to 1
5 - Place 7
6 - Attach 7 with 1 to 3
7 - Place 3
8 - Attach 3 with 1 to 7
9 - Place 6
1 - Attach 6 with 1 to 3
11 - Place 4
12 - Attach 4 with 1 to 6
13 - Place 5 in end of pipe of 4
14 - Place 12
15 - Attach 12 with 1 to 1
16 - Place 2
17 - Attach 2 with 1 to 12
18 - Place 5 in end of pipe of 2
19 - Connect 9 to 2
2 - Connect 4 and 8 at right height to 2
21 - Place 13 in center of 12
22 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
23 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment
3 - Make sure the ends of the seesaw land on the shock absorber
4 - The maximum height of the end of the bar (<1 cm)

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Pioneer Play
Product code PNRE000.308
Name of equipment Playchain 308
Maximum height of fall 1,2 m
Year of construction 2017
Certificate 11100319321
inspection authority Liftinstituut B.V.
Buikslotermeerplein 381, A'dam - 1025 XE Amsterdam
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Playchain 308
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PNRE000.308
Playchain 308

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

B
BB
Be
ee
en
nn
na
aa
am
mm
mi
ii
in
nn
ng
gg
g
Title
O
OO
Op
pp
pm
mm
me
ee
er
rr
rk
kk
ki
ii
in
nn
ng
gg
g
Comment
D
DD
Da
aa
at
tt
tu
uu
um
mm
m
Date
T
TT
Te
ee
ek
kk
ke
ee
en
nn
ni
ii
in
nn
ng
gg
g
Drawing
MOD PNR 530 000
Koppelstuk
Speelbuis
20-8-2010
BOER
S
SS
SP
PP
PE
EE
EE
EE
EL
LL
LT
TT
TO
OO
OE
EE
ES
SS
ST
TT
TE
EE
EL
LL
LL
LL
LE
EE
EN
NN
N
Samenstelling module Assembly module
Buis 60, 15x30
Zadelring
A
03001560KS2
4
SpeelbuisKoppeling
A
POM032
PNR
KS13
M10SLUI RING 002010030BSR22
ISO 7380 - M10 x 30BOLKOP SCHROEF 030010023BSR2
1
OPMERKINGBENAMING
RBEH.NR.
PROJ.
YPEN
POS
1
4
3
2