BOERPLAY Playchain 402 User manual

PNRE000.402
Playchain 402

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 402 A
Pionier
Playchain 402
23-1-2017
Afmetingen Dimensions
0,00 m
0,24 m
0,25 m
0,91 m
1,02 m
1,37 m
5,53m
4,99 m
3,18m
2,67 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 402 A
Pionier
Playchain 402
23-1-2017
Obstakelvrije zone Obstacle free zone
Obstakelvrij WAS
Obstacle free WAS
Opvangzone
Impact area
Obstakelvrij EN-1176
Obstacle free EN-1176
8,52m
8,02 m
6,82 m
8,02m
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 402 A
Pionier
Playchain 402
23-1-2017
Bodemplan Groundplan
0,60 m
rondmarkering
Ground le el marker
0,00 m
1,72 m
3,14 m
3,19 m
3,50 m
3,59 m
3,72 m
4,10 m
5,41 m
5,63 m
5,68 m
5,86 m
6,26 m
6,32 m
7,01 m
8,53 m
R1,50m
0,00m 1,67m 1,68m 2,74m 2,79m 3,19m 3,85m 3,93m 4,28m 4,40m 4,95m 4,95m 5,36m 5,41m 6,46m 7,98m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 402 A
Pionier
Playchain 402
23-1-2017
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
EnkelWokkel
000325PNRMOD21
Speelb isKoppelst k
000530
PNR
MOD102
Speelb isBasisst k 000531
PNR
MOD23
Speelb isBasisst k + lippen
000532
PNR
MOD2
4
Speelb isHoekst k
000533PNRMOD25
Speelb isSpringplank
B
000540
PNR
MOD16
Speelb is Oploopnet
A
000541
PNR
MOD1
7
Speelb isBol bla w
001543PNRMOD18
Speelb isD ikel 90 cm
000544PNRMOD19
Speelb isSchoolbord
A
000
545PNR
MOD110
Mod le PNRGlijbaan 93 cm
A
000546
PNR
MOD111
Speelb isSpiegel
A
000549
PNR
MOD112
Speelb isTelbollen
000550PNRMOD113
Speelb isGlijstangen
000552PNRMOD114
Speelb isZithoek klein
A
000556
PNR
MOD215
Speelb is
Tafeltje
A000557PNRMOD216
161541 9
5
4210
8
15
126 5
11 16
11
14
7

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
Montage Mounting
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Plaats 6
- Plaats 5
4 - Verbind 5 met 2 aan 6
5 - Plaats
6 - Verbind met 2 aan 5
7 - Plaats 15
8 - Verbind 15 met 2 aan
9 - Plaats 8
10 - Verbind 8 met 2 aan 15
11 - Plaats 4
12 - Verbind 4 met 2 aan 8
1 - Plaats 5
14 - Verbind 5 met 2 aan 4
15 - Plaats
16 - Verbind met 2 aan 5
17 - Plaats 15
18 - Verbind 15 met 2 aan
19 - Plaats 4
20 - Verbind 4 met 2 aan 15
21 - Verbind 4 aan 2 aan 6
22 - Plaats 16 en 16 in center van 15 en 15
2 - Verbind 7 en 14 aan
24 - Verbind 9 op de goede hoogte aan 4
25 - Verbind 10 aan 4
26 - Verbind 11 aan
27 - Verbind 1 en 1 op de goede hoogte aan 11
28 - Verbind 12 aan 4
29 - Verbind 1 op de goede hoogte aan 4
0 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
1 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
- Zorg dat de uiteinden van de wip op de demper komen
4 - De uiterste hoogte van het uiteinde van de balk (<100 cm)
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Place 6
- Place 5
4 - Attach 5 with 2 to 6
5 - Place
6 - Attach with 2 to 5
7 - Place 15
8 - Attach 15 with 2 to
9 - Place 8
10 - Attach 8 with 2 to 15
11 - Place 4
12 - Attach 4 with 2 to 8
1 - Place 5
14 - Attach 5 with 2 to 4
15 - Place
16 - Attach with 2 to 5
17 - Place 15
18 - Attach 15 with 2 to
19 - Place 4
20 - Attach 4 with 2 to 15
21 - Attach 4 with 2 to 6
22 - Place 16 and 16 in center of 15 and 15
2 - Attach 7 and 14 to
24 - Connect 9 at right height to 4
25 - Attach 10 to 4
26 - Attach 11 to
27 - Connect 1 and 1 at right height to 11
28 - Attach 12 to 4
29 - Connect 1 at right height to 4
0 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
1 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment
- Make sure the ends of the seesaw land on the shock absorber
4 - The maximum height of the end of the bar (<100 cm)

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Pioneer Play
Product code PNRE000.402
Name of equipment Playchain 402
Maximum height of fall 0,9 m
Year of construction 2017
Certificate 11100319321
inspection authority Liftinstituut B.V.
Buikslotermeerplein 381, A'dam - 1025 XE Amsterdam
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Playchain 402
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PNRE000.402
Playchain 402

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

WokkelWokkelbuis
B
320018
PNR
OME
1
2
EI 05Submodule 000005
PNR
SMD2
1
OPMERKINGBENAMING
RBE .NR.
PROJ.
TYPEN
POS
B
BB
Be
ee
en
nn
na
aa
am
mm
mi
ii
in
nn
ng
gg
g
Title
O
OO
Op
pp
pm
mm
me
ee
er
rr
rk
kk
ki
ii
in
nn
ng
gg
g
Comment
D
DD
Da
aa
at
tt
tu
uu
um
mm
m
Date
T
TT
Te
ee
ek
kk
ke
ee
en
nn
ni
ii
in
nn
ng
gg
g
Drawing
MOD PNR 325 000
Wokkel
Enkel
9-1-2009
BOER
S
SS
SP
PP
PE
EE
EE
EE
EL
LL
LT
TT
TO
OO
OE
EE
ES
SS
ST
TT
TE
EE
EL
LL
LL
LL
LE
EE
EN
NN
N
Samenstelling module Assembly module
1
2