BOERPLAY PSTE000.080 User manual

PSTE000.080
Tumble bar solo

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 080
Duikelrek
Solo
27-1-2017
Obstakelvrije zone Obstacle free zone
Obstakelvrij WAS
Obstacle free WAS
Opvangzone
Impact area
Obstakelvrij EN-1176
Obstacle free EN-1176
2,08 m
0,50 m0,49 m
3,03m
R1,50m
4,08 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 080
Duikelrek
Solo
27-1-2017
Bodemplan Groundplan
0,62m
0,16m
0,50 m
0,50 m
0,15m
0,95m0,57m
0,57m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 080
Duikelrek
Solo
27-1-2017
Afmetingen Dimensions
1,10 m
0,90m
1,00m0,14m
Staanders afvlakken zodat kopplaat duikelstang geheel tegen
staander komt. Uitstekende delen < 8 mm. (2x)

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 080
Duikelrek
Solo
27-1-2017
odules odules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
Rek H=900Duikel
B
008007PSTMOD11
Paal H=900Duikel
A010007PSTMOD12
2

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 080
Duikelrek
Solo
27-1-2017
ontage ounting
Geleverde delen
A - 2x staander met voetplaat 1,6x0,3x0,3 m [20 kg]
B - duikelstang 0,8x0,1x0,1 m [2 kg]
Bevestiging sets
1 - 2 schroeven 5x50 met ring (2 stuks)
Montagevolgorde
1 - graaf de gaten volgens het bodemplan en plaats hierin de staanders
2 - monteer de stang met de bevestiging sets op de aangegeven hoogte
3 - controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
4 - dicht de gaten en verdicht het zand
Controles
1 - correcte opbouw en alle bevestigingsmiddelen
2 - de hoogte van de stang (90 cm)
3 - controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied parts
A - 2x post with footplate 1,6x0,3x0,3 m [20 kg]
B - tumble bar 0,8x0,1x0,1 m [2 kg]
Mounting kits
1 - 2x 5x50 screws with washers (2 pcs)
Assembly sequence
1 - dig the holes according to the ground plan and place the play equipment
2 - fix the bar between the posts with mounting kits 1
3 - check that the equipment conforms to the dimensions shown on sheet 'dimensions'
4 - close the holes and compact the sand
Checks
1 - correct assembly and all the fasteners
2 - the height of the bar (90 cm)
3 - check the dimensions of the safety area compared to the play equipment
A
B
A
1
Grondmarkering
Ground level marker

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Adventure Play
Product code PSTE000.080
Name of equipment Duikel solo
Maximum height of fall 0,9 m
Year of construction 2017
Certificate 031066
inspection authority TUV Nederland QA BV
De Waal 21c, Best - 5684 PH Best
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Tumble bar solo
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PSTE000.080
Tumble bar solo

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PST 007 008 B
Duikel
Rek H=900
23-4-2015
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
5 x 70 - RVS A2-70
Schroef Assy
070005002BSR21
5 x 50S HROEF 050005002BSR22
M5 - RVS A2-70
Facet ring
015005036BSR23
Lengte =1600Paal 14-16 016160PSTOHO
14
Lengte = 500Plank 120x20 050230PSTOHO
15
Adventure PlayDuikelbuis
A
320076PSTSME16
6
4
0,62m
Grondmarkering
Ground level marker
1
5
2 3
0,00 m
1,50 m
1,60 m