BOERPLAY PSTE000.225 User manual

PSTE000.225
Hill slide

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 225 A
Glijbaan 0,93m
tbv Talud
15-7-2015
BOER
SPEELTOESTELLEN
Obstakelvrije zone Obstacle free zone
Obstakelvrije zone
Obstacle free zone
Opvangzone
Impact area
1,50m
5,29m
3,57 m
2,56 m
0,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 225 A
Glijbaan 0,93m
tbv Talud
15-7-2015
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
0,61m
0,80m
1,02 m
0,75m
0,25 m
0,82m
0,55 m
0,73m
<0,20 m
38°
1,72 m 1,45 m 1,57 m
1,37m
1,38m
0,48m
Grondmarkering
Ground level marker
0,96m
0,71 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 225 A
Glijbaan 0,93m
tbv Talud
15-7-2015
BOER
SPEELTOESTELLEN
Afmetingen Dimensions
0,00 m
0,90 m
1,15 m
0,96m
<0,35m
2,31 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 225 A
Glijbaan 0,93m
tbv Talud
15-7-2015
BOER
SPEELTOESTELLEN
Modules Modules
OpmerkingBenamingRev.Bew.VolgnrProgr.Type
#
Nr
80 x 100 cmVlonder
025040STMOD11
Module RobinaGlijbaan 1 m
A
190002STMOD
1
2
1
2
Typeplaatje
Identification plate
B

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PST 000 225 A
Glijbaan 0,93m
tbv Talud
15-7-2015
BOER
SPEELTOESTELLEN
Montage Mounting
Geleverde delen:
A - platform 0,8x0, x0,6 m [50 kg]
B - glijbaan 2,4x0,8x0,8 m [40 kg]
Bevestiging sets:
1 - slotbout M10 incl. moer en ring (6x)
Montagevolgorde:
1 - graaf de gaten volgens het bodemplan en plaats hierin delen A en B
2 - monteer B aan A met set 1 op de voorgeboorde gaten
3 - controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
4 - dicht de gaten en verdicht het zand
Controles:
1 - correcte opbouw en alle bevestigingsmiddelen
2 - de uiterste hoogte van het uiteinde van de glijbaan (<1 cm)
3 - controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied parts:
A - platform 0,8x0, x0,6 m [50 kg]
B - slide 2,4x0,8x0,8 m [40 kg]
Mounting kits:
1 - M10 bolt with washer and lock nut (6x)
Assembly sequence:
1 - dig the holes according to the ground plan and place parts A and B
2 - mount part B to A using set 1 on the pre-drilled holes
3 - check that the equipment conforms to the dimensions shown on sheet 'dimensions'
4 - close the holes and compact the sand
Checks:
1 - correct assembly and all the fasteners
2 - the maximum height of the end of the slide (<1 cm)
3 - check the dimensions of the safety area compared to the play equipment
A
B
1

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Adventure Play
Product code PSTE000.225
Name of equipment Taludglijbaan 0.8 - 0.93m
Maximum height of fall < 0,6 m
Year of construction 2017
Certificate 031079
inspection authority TUV Nederland QA BV
De Waal 21c, Best - 5684 PH Best
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Hill slide
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
PSTE000.225
Hill slide

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD PST 002 190 A
Glijbaan 1 m
Module Robina
20-8-2013
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#
Nr
BORG RVS M10DOPMOER 020010011BSR61
M10 x 50 - RVS 2-70Slotbout 050010026BSR62
M10SLUITRING 002010030BSR63
93 cm
Glijbaan
B
320611
VRB
SME1
4
2
4
3
1
Grondmarkering
Ground level marker
0,61m1,18m
1,72 m
Let op: toestel bij voorkeur niet met
de glijbaan op het zuiden plaatsen.
Attention: it is advisable not to oriënt
playground equipment with the slide
facing south