Bolin Technology BC-9 Series User manual

1
2
3
4
SDI Fiber-Optical Video Output Extension Card Installation Guide
1. SDI fiber-optical video output expansion card and optical module installation steps
Note:
Must be operated in the power-off status when installing the SDI fiber-optical video output expansion card and optical module
Loose the screw (no need to unscrew it off) and
pull it out in parallel
Insert the SDI fiber-optical video output extension
card into the slot in parallel
Push it in parallel, then tighten the screws
Insert the optical module into the SDI fiber-optical
video output expansion card.
Optical module: single-mode 1,310nm,
Connector: duplex LC

5
6
BC-9-4K12S-S6MN/B BC-9-4K12S-S6MN/W BC-9-4K12S-S3MN/B BC-9-4K12S-S6MN/W
BC-9-VC-SFPM
Push it in parallel
Insert the fiber-optical cable into the optical module
and connect cable another side into the optical
transceiver to achieve long-distance transmission
(10Km).
2. SDI fiber-optical video output extension card suitable for model
3. Optical module recommended model