Bolva 32BF20 User manual

USER’S MANUAL
32BF20
For technical assistance or troubleshooting please call
1-866-594-5445 or visit www.bolvadigital.com
32” LED TELEVISION

Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
-
paratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or
Moisture.
shall be placed on the apparatus.
17. The mains plug is used as the disconnect and shall remain readily operable.
18. This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may
become damaged.
Safety:
TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED
SERVICE TECHNICIAN ONLY.
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s
Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompanying the
appliance.
to constitute a risk of electric shock to the users.
1

Safety Instructions
Please read these instructions carefully.
This product complies with all applicable US federal safety requirements, as well as those of the Canadian
Standards Association.
1. Cleaning
Always unplug the TV before cleaning. Do not use liquid or aerosol cleaners. Use a soft, slightly damp cloth to
clean.
2. Water and Moisture
Do not use this TV near water. Avoid using this TV in an excessively damp environment.
3. Stand
This TV should always be placed on a solid, sturdy surface.
4. Ventilation
To prevent overheating, do not block or obstruct the vent openings on the TV’s back panel. Also, avoid placing this
TV in a confined area with poor air flow.
5. Power Sources
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of
The type of power supply to your home, consult your electronics retailer or local power company.
6. Power Cord Polarization
This TV is equipped with a three-wire grounding type plug, a plug with a third (grounding) pin. As a safety feature, this
plug will only t into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician
to replace the obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
7. Power Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the TV.
8. Lightning
To protect the TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning
and power-line surges.
2

Safety Instructions
9. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electri-
cal Code (U.S. A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten-
na-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Example of Grounding According to National
Electrical Code Instructions
NEC - National Electrical Code
10. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
11. Overloading
12. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out
TV.
13. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or
14. Damage Requiring Service
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will
e. If the TV has been dropped or the cabinet has been damaged.
f. If the TV exhibits a distinct change in performance.
Ground Clamp Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Ground Clamps
Electric Service
Equipment
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
15. Replacement Parts
When replacement parts are required, be sure that only an authorized service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards and void any warranty.
3

Safety Instructions
16. Safety Check
Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine
whether the product is in proper operating condition.
17. Wall Mounting
The TV should be mounted to a wall only by a professional. The TV may slide or fall, causing serious injury to a child
or adult, and serious damage to the product
Wall hanging height of the whole machine shall not exceed 2m.
. Warranty shall be voided.
18. Heat
The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products
NOTE TO CABLE / TV INSTALLER:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric
should be connected to the grounding system of the building, as close to the point of the cable entry as practical.
FCC REGULATORY INFORMATION:
This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and television.
- Connect the equipment into an outlet on a circuit different from that to which the television is connected.
- Consult your dealer or an experienced radio / TV technician for assistance.
authority to operate the equipment.
guarantee that interference will not occur in a particular installation. If this television does cause interference to other
(including amplifiers) that produce heat.
19. Remote Control
Do not expose the remote control to liquids, direct sunlight or sources of excessive heat.
Code (USA). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground
Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s
Stability Hazard
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or
death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the
furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and
supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
• This equipment is a Class II or double insulated electrical appliance. It has been designed in
such a way that it does not require a safety connection to electrical earth.
4

Table of Contents
Important Safety Instructions.........................................................................................................................................1
Table of Contents ..........................................................................................................................................................5
Introduction....................................................................................................................................................................6
Installing the Base .........................................................................................................................................................7
Remote Control
Battery Install.................................................................................................................................................................8
Overview .......................................................................................................................................................................9
TV Overview
Front & Side Panel ......................................................................................................................................................11
Rear Panel .................................................................................................................................................................12
5
Installation
Connection to Antenna & Cable / Satellite Box ...........................................................................................................13
Connection to HDMI Input ...........................................................................................................................................14
Connection to Component YPbPr Input ......................................................................................................................15
Connection to Composite Input ...................................................................................................................................16
Connection to a Personal Computer ...........................................................................................................................17
Connection to a Home Theater System ......................................................................................................................18
TV Setup
Initial Setup Wizard .....................................................................................................................................................19
TV Provider Setup & Channel Auto Scan....................................................................................................................20
Picture Setting
Brightness ...................................................................................................................................................................21
Contrast ......................................................................................................................................................................21
Color............................................................................................................................................................................21
Tint...............................................................................................................................................................................21
Sharpness ...................................................................................................................................................................21
Color Temperature.......................................................................................................................................................21
Audio Settings
Sound Mode ................................................................................................................................................................22
Bass.............................................................................................................................................................................22
Treble ..........................................................................................................................................................................22
Balance .......................................................................................................................................................................22
Surround sound...........................................................................................................................................................22
SPDIF Type................................................................................................................ ...................................................22
Audio Language...........................................................................................................................................................22
Date & Time Settings...................................................................................................................................................23
Setup Settings
Menu Languages.........................................................................................................................................................24
Transparency...............................................................................................................................................................24
Restore Default............................................................................................................................................................24
HDMI CEC ..................................................................................................................................................................24
Closed Captions ..........................................................................................................................................................26
Parental Control ..........................................................................................................................................................27
TV Settings
Favorite .......................................................................................................................................................................2
Show / Hide .................................................................................................................................................................29
Channel Label .............................................................................................................................................................29
USB Modes
MHL Setting
.................................................................................................................................................................30
................................................................................................................................................................31
.............................................32
Troubleshooting ..........................................................................................................................................................3
9
3
CEC.............................................................................................................................................................................25

Introduction What’s In The Box
The package includes the following items. Save the carton & packing for future shipping
• Remote Control
• AAA Batteries (2)
• Quick Start Guide
• User Manual
• Child Safety
• Pedestal Base
• User manual
• Quick Start Guide
• Child Safety
• Remote Control
• AAA Batteries x 2
teglliwkoobnoitcurtsnisihT.snoitcnufdnaserutaeftuobasnoitseuqevahuoyrevenehwediugsihtotreferesaelP
you up and running with the best possible connection type for your devices. Enjoy!
This TV uses a 200x100 VESA mounting bracket attachment pattern. Please take this information with you when
purchasing a wall mount for this TV.
Wall Mount Information
• Base Legs
6
USER’S MANUAL
32BF20
For technical assistance or troubleshooting please call
1-866-594-5445 or visit www.bolvadigital.com
32” LED TELEVISION

Place the TV face down
on a soft cloth or cushion.
Position base as shown.
Insert 2 legs directly into
the bottom of the base,
no screw is needed.
Installing the Base
7

Battery Install
Remote Control
Your remote control handset is powered by two (2) AAA type batteries
• Effective remote range is approximately 16 feet at an
angle of no greater than 30° to the left / right or 20° up /
down to the IR sensor.
• To avoid possible damage from battery chemical
leakage, remove the batteries if you do not plan to use
the remote for an extended period of time. Do not mix
batteries of different age and / or type. Always discard
used batteries safely.
• Do not expose the remote control to liquids, direct sun-
light or sources of excessive heat.
• The IR receiver on the TV will not work properly if the set
is in direct sunlight.
NOTE: Improper use of batteries can result in a chemical
leakage or explosion.
Cable / Satellite Remote Control Codes:
NOTE: The remote control from your Cable/Satellite provider can be programmed to operate most
of the major functions of this TV model which include: POWER, INPUT / SOURCE, VOLUME +,
VOLUME - , CHANNEL +, CHANNEL - , SELECT/OK/ENTER (based on your remote), and NUMBER
buttons. For non-major TV functions not listed, use the remote control included with this TV.
• Turn the remote over and remove
battery cover.
• Place two (2) “AAA” batteries into
the battery compartment with the “+”
and “-“ ends facing as indicated.
• Replace the cover
8
30 30
IR Receiver
To program your Cable / Satellite remote to operate this TV, follow the programming instructions
included with your providers’ remote and use the following codes.
Comcast / Xfinity: 10030, 12731
Dish Network : 506
RCA Universal : 0030
AT&T (U-verse) : 1043
Cox: 2397, 2049, 10030, 12731
DirecTV: 10030, 12731
Optimum: 0040
Spectrum / Time Warner: 761

Remote Control Overview
9

Remote Control Overview
Button Function
1. POWER Turn the display ON or OFF (Standby).
2. DISPLAY Provides program information for program being viewed.
3. PLAY/PAUSE (USB)
4. PREVIOUS (USB)
5. NEXT (USB)
6. STOP (USB)
7. REP REPEAT (USB)
8. CH.LIST Press to display a list of channels saved in the TV tuner memory.
9. GUIDE Press to review scheduled programming for the currently viewed channel.
10. FAV Press to display a listing of your favorite TV channels.
11. FREEZE Pause and still-frame the current image on the display. Press again for live TV.
13. TEMP Select the Color Temperature COOL - NORMAL - WARM.
14. qptuARROWS / ENTER Press the navigation buttons for moving through the menu options. Press the
15. EXIT Press to exit a displayed menu.
16. RETURN Press to return to the previous menu.
17. SLEEP Press to activate the Sleep function. The TV will automatically turn off after;
18. MENU Press to display the Main menu.
19. ASPECT Select the viewable display aspect options: NORMAL - WIDE - ZOOM - CINEMA.
20. VOLUME (+ / -) Adjust the volume up (+) or the volume down (-).
21. LAST Press to switch between the current channel and previously viewed channel.
22. MUTE Press to temporarily turn off the TV audio. Press again to resume.
23. CHANNEL (qp)Change the channel up or down.
24. NUMBERS / DASH Select desired TV channel directly. For example: to select digital channel 4-1,
press “4”, press “-”, and press “1” = (4-1).
25. INPUT Press to display all of the input sources on screen.
27. MTS Press to select a program’s second audio channel (if available).
28. CCD Press to select closed caption subtitles (if available) OFF - ON - CC ON MUTE
29. NUMBER KEYS Press number keys to enter channel numbers.
12. PICTURE STANDARD - DYNAMIC - SOFT - USER - POWER SAVING.
5 - 10 - 15 - 30 - 45 - 60 - 90 - 120 - 180 - 240(minutes) - OFF.
26. AUDIO STANDARD - MUSIC - MOVIE - USER
10

TV Overview
11
IR Receiver
A Green/Blue light illuminates When
the television power is on.
Front & Bottom Panel
1. POWER - Press the POWER button to turn the TV ON/ OFF (standby). The screen image will
appear within a few seconds, and the LED will turn on.
/

TV Overview Rear Panel
   

12
HDMI2 VGA
HDMI3(MHL) PC
AUDIO TV
SPDIF L R CVBS/Y PB PR HDMI1(ARC)
8. USB Input Port
supports MP3 and JPEG.
5. HDMI Input - Connect to digital AV equipment that features HDMI connectivity. HDMI supports enhanced high
cable not included.
6. PC IN - VGA Input - Connect an optional VGA cable (not included) from your personal computer.
PC Audio Input - Audio cable (not included) for sound.
4. Component Y Pb Pr Input - Connect to an AV device that features component (Y Pb Pr) video and audio output
jacks.
7. RF Input - Connect an antenna or cable connection for television reception.
Note: Use an outdoor antenna, cable or satellite for best reception.
1. Headphone Jack - Connect a stereo headphone (not included) for private listening.
2. SPDIF - Connect an optional coaxial digital cable (not included) through a compatible amp / receiver to enjoy
superior audio sound.
3. AV Input - Connect an external device to the composite VIDEO(V) and AUDIO (L / R) out jacks found on most
video equipment.
,
NOTE: You must remove the
pedestal before wall mounting.
Wall Mounting
Use VESA 200x100 wall
mount hardware.
Wall mount screws size: 4 x (M5 x 8)
It is recommended that you
consult a professional before
mounting this TV to a wall.

13
Coaxial / RF Cable (not included)
Ant. / Cable
Wall Outlet
Installation Connection to Antenna & Cable /
Satellite Box
Roof Antenna / Cable Outlet Installation
It is strongly recommended that the installation of a high quality roof top antenna, digital cable, or satel-
lite set top box be used in conjunction with your television for best broadcast reception. For indoor use, we
recommend an Apex Digital amplified HDTV antenna. Note: reception is determined by your regional location,
geographical terrain, distance from the local broadcast transmitter and strength of antenna.
How to connect with an indoor or rooftop
antenna
• Connect the RF coaxial (75 ohm) cable from
your existing roof top / in door antenna, or wall
outlet. Finger tighten the Coaxial / RF Cable end
to the TV input on the panel.
• Tune to TV programming directly from the
television tuner.
HDMI2 VGA
HDMI3(MHL) PC
AUDIO TV

HDMI2 VGA
HDMI3(MHL) PC
AUDIO TV
HDMI1(ARC)
HDMI2 VGA
HDMI3(MHL) PC
AUDIO TV
HDMI1(ARC)
14
HDMI
Installation Connection to HDMI Input
Using HDMI
For BEST video performance
Connect to external equipment that offers HDMI, an uncompressed, all
digital video / audio interface found on today’s HD digital set top boxes
and Blu-ray players. Use of this pure digital technology offers enhanced
There are three (3) HDMI inputs available for use with HD set top boxes,
gaming consoles and HD DVD / Blu-ray players.
How to Connect HDMI
From your external digital equipment, connect a HDMI cable from
the HDMI output to the HDMI input on the TV’s panel.
How To Use
Press the INPUT button on the remote control. Use arrow
buttons to highlight the input to view (HDMI1,2,3 ) then press ENTER .
Coaxial / RF Cable
(not included)
HDMI cable ( not included )
Cable / Satellite
set top box
HDMI cable ( not included )
Digital set top box, gaming console,or
Blu-ray w / HDMI interface
Digital Cable / Satellite Set Top Box
How to connect with Digital Cable / Satellite Set Top Box
Connect the RF coaxial (75 ohm) cable from the video outlet of your cable / Satellite box to the RF input on the TV’s
panel. Select Ch. 3 or 4 on the TV and select a channel.
For greater performance, if possible, use component or a HDMI installation(shown). Refer to your set top box user
manual.

15
Installation Connection to Component
YPbPr Input
For BETTER video performance
Connect to external equipment that features component video output
jacks for better performance. Use the Component Y Pb Pr video and
audio inputs with a set top box, gaming console or DVD player.
How to Connect Component
When connecting external equipment to your television, match the
colors of the connecting jacks (Video: Blue, Green, Red; Audio: White
/ Red ).
Connect the optional component video cables (blue, green, red) (not
included) from the video output jacks (Y, Pb, Pr) on your external
equipment to the Component Y Pb Pr input on the TV’s panel.
Connect white / red audio cables for sound from the audio (L / R)
output jacks on your external equipment to the AV L / R input jacks on
the TV’s panel.
How to Use
Press the INPUT button on the TV remote control. Use arrow
buttons to highlight the input to view(Component) then press ENTER.
Connecting External Equipment to Component Video IN (Y Pb Pr)
Component cables
(not included)
Digital set top box, gaming console or DVD
SPDIF L R CVBS/Y PB PR HDMI1(ARC)

16
Installation Connection to Composite Input
Connecting External Equipment to AV Composite IN on your
television
For GOOD video performance
Connect to external equipment using optional video and audio cables.
Composite output jacks are available on most set top cable / satel-
lite boxes and DVD players. (HDMI and Component connections are
recommended for the best performance.)
How to Connect Composite AV
When connecting external equipment to your television, match the
colors of the connecting jacks (Video: Yellow Audio: White & Red).
Connect the yellow video cable from the video output jack on your
external A / V equipment (i.e.: DVD player, set top box) to AV input
on the TV’s panel.
Connect the white / red audio cables for sound from the audio (L /
R) output jacks on your external equipment ( i.e.: DVD Player, set
top box) to the AV (L / R) jacks on the TV’s panel.
How to Use
Press the INPUT button on the remote control. Use arrow
buttons to highlight the input to view (AV) then press ENTER.
Audio Video Cable (not included)
Digital set top box, gaming console or DVD
SPDIF L R CVBS/Y PB PR HDMI1(ARC)

17
VGA & Audio Cable (not included)
Installation Connection to a Personal Computer
Connecting a Personal Computer with VGA to your television
Recommended computer display resolution:1366x768@60 Hz
How to Connect a PC
Connect using an optional male to male VGA cable (not included) from
your PC to the VGA input on the TV’s panel.
How to Connect Audio sound
Connect an audio cable (not included) from the
computer’s mini audio output jack to the audio input on the TV’s
panel.
How to Use
Press the INPUT button on the remote control. Use the buttons
to highlight the VGA input and press the ENTER button.
NOTE: If your PC uses a standard signal mode, the screen will adjust
automatically .
HDMI2 VGA
HDMI3(MHL) PC
AUDIO TV

CVBS/Y PB PR HDMI1(ARC)
18
How to Use (Video)
Press the appropriate INPUT
ENTER.
How to Use (Audio)
Installation Connection to a Home
Theater System
Connection to a Home Theater Audio System
Front Left Front Right
Center Channel
Dolby Surround
Connection Illustration
Optional cables
Dolby Prologic
SPDIF L R CVBS/Y PB PR HDMI1(ARC)