Borg Oasis Studio Kenko Moebius 55 User manual

To cameras
●
Optical tube unit (assembled)
①MOEBIUS 55 objective lens
②60ΦL130 extension tubes A (2 incl.)
③60ΦL130 extension tube B
④M57 helicoid LIII
⑤Eyepiece holder
●
Included parts
⑥Upright prism
⑦20 mm eyepiece
●
Other
⑧Rear cap for the objective lens (60 mm)
* included with the upright prism
⑨Operation manual
MOEBIUS 55 Optical Tube Operation Manual
●
How to assemble the lens tube
<1>
Following the diagram, connect the upright prism and the eyepiece to the main
optical tube.
<2>
Insert the mounting stand on the side of the optical tube into the mount on the
tripod, and screw it into place firmly with the thumbscrews.
<3>
Loosen the screw on the eyepiece holder to adjust the angle so that the eyepiece
points straight up. Take care when adjusting not to drop the upright prism or
eyepiece.
●
How to use
<1>
Look in through the front hole of the viewfinder, using the fine adjustment knob on
the mount side to align the object you want to see in the center of the other hole
at the end of the tube to adjust the optical tube angle.
<2>
Turn the M57 Helicoid LIII to adjust the focus. * When replacing the eyepiece or
changing users, the telescope’s focus will need to be fine-tuned again.
Parts included with this product
Mounting
Stand
* For how to connect to
cameras, please see
“Connecting the Optical
Tube to Cameras” on
the reverse side.
Thank you very much for purchasing this product.
Please be sure to read this operation manual thoroughly
before use for proper operation.Please also be sure to
store the manual for future reference.
Viewfinder
Hole
①MOEBIUS 55
objective lens
④M57 helicoid LIII
20 mm
Eyepiece
Upright
prism
②60ΦL130 extension
tube A
③60ΦL130 extension
tube B
⑤Eyepiece
Holder
②60ΦL130 extension
tube A
Optical tube unit (assembled)
The main unit can be disassembled from the parts indicated with the symbol in the diagram.
When disassembling, please take care not to touch the donut-shaped shielding ring on the inside.
Ｔ2023-3A

Connecting the Optical Tube to Cameras
The image circle (good image area) of
this optical tube is around 20 mm.Using a
35 mm full size or APS-C sensor size
digital camera, etc., will cause the corners
of the image to be distorted.
* The parts shown in this box and camera are all sold separately.
①
When connecting to a single-lens reflex
camera body:
[5002 -5009], [50021], [5018]
Camera mount
＋Single-lens reflex camera body
②
When connecting to a mirror-less single
lens camera body:
[7921] M49.8 extension tube S
＋[7922] M49.8 extension tube M
＋[5011 -5013], [5015 -5017], [5032]
Camera mounts
＋Mirror-less single lens camera body
③
When connecting to a Pentax Q camera
body:
[7879] Spacer 2 mm (60Φ)
＋[7921] M49.8 extension tube S x 2
＋[7922] M49.8 extension tube M
＋[5014] camera mount for Pentax Q
＋Pentax Q camera body
MOEBIUS 55 optical tube
3-19-3, Tateishi, Katsushika-ku, Tokyo 124-0012, Japan
https://www.tomytec.co.jp/borg
To connect to a camera, refer to the illustration below and connect
with the necessary parts.
Warranty Card –Warranty Policy –
Caution
When connecting to a camera,
please remove the eyepiece
holder, upright prism, etc.
[5002 -5009]
[50021], [5018]
Single-lens reflex
camera body
[7921] Mirror-less
single lens
camera body
[7922] [5011 -5013]
[5015 -5017]
[5032]
Pentax Q
camera body
[7921] x 2 [7922]
[7879] [5014]
Camera
mount
Holder M
[7000]
M57/60
Extension
tube M
[7603]
M57 rotation
device DX
[7352]
Warranty period: 1 year from the date of purchase
Ｔ2023-3A
1. For repairs, please make sure you have your purchase receipt and contact the store of your purchase.
2. If you do not have the purchase receipt, a repair fee will be required.
3. Damage caused by improper handling during use will also require arepair fee.
(Such as ①-⑧below)
①Damage caused by misuse or user error ②Damage caused by moisture or other improper storage
conditions ③Damage caused by afire, flood, or natural disasters ④Damage caused by repair, modification,
or disassembly by avendor other than our company ⑤Damage due to other similar causes ⑥Exchanging
of the consumables ⑦Damaged caused by dropping, impacts, sand, dirt, submersion in water, flooding, etc.
⑧Purchases from individual sellers, auctions, etc.
4. Not valid without the date of purchase and name of the store where purchased.
5. Please store your receipt carefully.
6. Any shipping or travel expenses required for repair will be borne by the customer.
7. We offer no warranty regarding other products damaged through use with our company’s products.
8. Please understand that we cannot offer examination, repair, user guidance, set-up, or other services in
person, either free or paid.
9. This warranty policy establishes a guarantee of repair at no cost, and does not limit your statutory rights.
Please indicate clearly the part(s) in question and other details regarding repairs.
■Personal Information
* Personal information provided by customers through this warranty
will be promptly disposed of after repairs are complete.
* If provided, we may use your age, gender, or other non-identifiable
information to process as statistical data.
* We will not disclose your personal information to third parties, except in
the following cases.
●When we have obtained your consent.
●When disclosing personal information to subcontractors, to the extent
necessary to achieve the purpose of use you have specified. However,
in such cases we will be responsible for necessary and appropriate
monitoring of such subcontractors to ensure the safe management as
provided by law.
KT Nakano Building
5-68-10, Nakano, Nakano-ku, Tokyo 164-8616, Japan
https://kenkoglobal.com
Tomytec