Bosch GSR Mx2Drive Professional User manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
2 609 140 750 (2011.08) O / 234 UNI
GSR Mx2Drive
Professional
de Originalbetriebs-
anleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών
χρήσης
tr Orijinal işletme talimat
pl Instrukcja oryginalna
cs Původní návod k
používání
sk Pôvodný návod na
použitie
hu Eredeti használati
utasítás
ru Оригинальное руко-
водство по
эксплуатации
uk Оригінальна інструкція
з експлуатації
ro Instrucţiuni originale
bg Оригинална
инструкция
sr Originalno uputstvo za
rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane
kasutusjuhend
lv Instrukcijas
oriģinālvalodā
lt Originali instrukcija
ar
fa
ΕΎϤϴϠόΗϞϴϐθΘϟ΍ΔϴϠλϷ΍
Ϡλ΍ έΎ ίήσ ΎϤϨϫ΍έ
OBJ_DOKU-21602-002.fm Page 1 Monday, August 1, 2011 8:09 AM

English | 11
Bosch Power Tools 2 609 140 750 | (1.8.11)
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 337589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
General Power Tool Safety Warnings
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
fKeep work area clean and well lit. Cluttered or dark areas invite accidents.
fDo not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
fKeep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Electrical safety
fPower tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
fAvoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
fDo not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
fDo not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
fWhen operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
fIfoperating apowertoolinadamplocation isunavoidable,usearesidualcurrentde-
vice (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
WARNING
OBJ_BUCH-1208-002.book Page 11 Monday, August 1, 2011 8:12 AM

12 | English
2 609 140 750 | (1.8.11) Bosch Power Tools
Personal safety
fStayalert, watch whatyouare doingandusecommon sensewhenoperatingapower
tool. Do not use a power tool while you are tired or under the influence of drugs, al-
cohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
fUse personal protective equipment. Always wear eye protection. Protective equip-
ment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
fPrevent unintentional starting. Ensure the switch is in the off-position before con-
necting to power source and/or battery pack, picking up or carrying the tool. Carry-
ing power tools with your finger on the switch or energising power tools that have the
switch on invites accidents.
fRemove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
fDo not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
fDressproperly.Do notwearlooseclothingorjewellery. Keep yourhair,clothingand
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
fIf devices are provided for the connection of dust extraction and collection facili-
ties, ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
Power tool use and care
fDo not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
fDo not use the power toolif the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
fDisconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
fStore idle power tools out of the reach of children and do not allow persons unfamil-
iar with the power tool or these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
fMaintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If dam-
aged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
fKeepcutting toolssharpandclean.Properlymaintainedcutting toolswith sharpcutting
edges are less likely to bind and are easier to control.
fUse the power tool, accessories and tool bits etc. in accordance with these instruc-
tions,takingintoaccounttheworkingconditionsandtheworkto be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
Battery tool use and care
fRecharge only with the charger specified by the manufacturer. A charger that is suit-
able for one type of battery pack may create a risk of fire when used with another battery
pack.
OBJ_BUCH-1208-002.book Page 12 Monday, August 1, 2011 8:12 AM

English | 13
Bosch Power Tools 2 609 140 750 | (1.8.11)
fUsepower tools only with specifically designated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
fWhen battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a con-
nection from one terminal to another. Shorting the battery terminals together may
cause burns or a fire.
fUnder abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
fHave your power tool serviced by a qualified repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
Safety Warnings for Drills and Screwdriver
fHold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory or fastener may contact hidden wiring. Cutting accesso-
ry and fasteners contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
fUse auxiliary handle(s), if supplied with the tool. Loss of control can cause personal in-
jury.
fUse appropriate detectors to determine if utility lines are hidden in the work area or
call the local utility company for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line
causes property damage.
fSwitch off the power tool immediately when the tool insert jams. Be prepared for
high reaction torque that can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
fHold the machine with a firm grip. High reaction torque can briefly occur while driving
in and loosening screws.
fSecure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
fAlways wait until the machine has come to a complete stop before placing it down.
The tool insert can jam and lead to loss of control over the power tool.
fDo not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against continuous intense sunlight,
fire, water, and moisture. Danger of explosion.
fIncase of damage andimproperuse ofthebattery, vapours maybeemitted. Provide
for fresh air and seek medical help in case of complaints. The vapours can irritate the
respiratory system.
fUse the battery only in conjunction with your Bosch power tool. This measure alone
protects the battery against dangerousoverload.
OBJ_BUCH-1208-002.book Page 13 Monday, August 1, 2011 8:12 AM

14 | English
2 609 140 750 | (1.8.11) Bosch Power Tools
fUse only original Bosch batteries with the voltage listed on the nameplate of your
powertool.Whenusingother batteries, e. g. imitations,reconditioned batteries orother
brands, there is danger of injury as well as property damage through exploding batteries.
Additional Safety and Working Instructions
fDusts from materials such as lead-containing coatings, some wood types, minerals
and metal can be harmful to one’s health and cause allergic reactions, lead to respi-
ratory infections and/or cancer. Materials containing asbestos may only be worked by
specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be worked.
fBefore any work on the machine (e. g., maintenance, tool change, etc.) as well as
during transport and storage, set the rotational direction switch to the centre posi-
tion. Unintentional actuation of the On/Off switch can lead to injuries.
fThe battery is supplied partially charged. To ensure full battery capacity, complete-
ly charge the battery in the battery charger before using for the first time.
fRead the operating instructions of the battery charger.
fApply the power tool to the screw only when it is switched off. Rotating tool inserts
can slip off.
fHold the machine with a firm grip. High reaction torque can briefly occur when switch-
ing gears. A noise can appear when switching gears.
Symbols
The following symbols are important for reading and understanding the operating instruc-
tions. Please take note of the symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer manner.
Symbol Meaning
GSR Mx2Drive: Cordless Drill/Driver
Grey-marked area: Handle (insulated gripping surface)
Article number
Read all safety warnings and all instructions
Before any work on the machine itself, remove the battery
OBJ_BUCH-1208-002.book Page 14 Monday, August 1, 2011 8:12 AM

English | 15
Bosch Power Tools 2 609 140 750 | (1.8.11)
Wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Drilling and screwdriving
Low speed
High speed
Switching On
Switching Off
U Rated voltage
n01 No-load speed (1. gear)
n02 No-load speed (2. gear)
M Maximum torque according to ISO 5393
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Tool holder
Weight according to EPTA-Procedure 01/2003
LwA Sound power level
LpA Sound pressure level
KUncertainty
ahVibration total value
Symbol Meaning
OBJ_BUCH-1208-002.book Page 15 Monday, August 1, 2011 8:12 AM

16 | English
2 609 140 750 | (1.8.11) Bosch Power Tools
Delivery Scope
Cordless Drill/Driver.
Battery, application tools and other accessories shown or described are not part of the
standard delivery scope.
A complete overview of accessories can be found in our accessories program.
Intended Use
Themachineisintended fordrivingin and loosening screwsas well as fordrillingin wood and
plastic.
Technical Data
The technical data of the machine are listed in the Table on page 229.
Please observe the article number on the type plate ofyour machine. The trade names ofthe
individual machines may vary.
Declaration of Conformity
We declare under our sole responsibility that the product described under “Technical Data”
is in conformity with the following standards or standardization documents: EN 60745 ac-
cording to the provisions of the directives 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
11.07.2011
Noise/Vibration Information
The measured values of the machine are listed in the table on page 229.
Noise and vibrational values (vector sum of three directions) determined according to
EN 60745.
The vibration emission level given in this information sheet has been measured in accord-
ance with a standardised test given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However
if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working period.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-1208-002.book Page 16 Monday, August 1, 2011 8:12 AM

English | 17
Bosch Power Tools 2 609 140 750 | (1.8.11)
Identifyadditional safety measures to protectthe operator fromthe effects of vibration such
as: maintain the tool and the accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Maintenance and Cleaning
fFor safe and proper working, always keep the machine and ventilation slots clean.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. Exploded views and information on spare parts can also
be found under:
www.bosch-pt.com
Our customer service representatives can answer your questions concerning possible appli-
cations and adjustment of products and accessories.
In all correspondence and spare parts order, please always include the 10-digit article
number given on the type plate of the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: [phone]
Fax: [phone]
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Action Figure Page
Removing the Battery 1 230
Inserting the Battery 2 230
Mounting application tools 3 230
Reversing the Rotational Direction 4 231
Adjusting the Speed 5 232
Switching On and Off 6 232
Selecting accessories – 233
OBJ_BUCH-1208-002.book Page 17 Monday, August 1, 2011 8:12 AM

18 | English
2 609 140 750 | (1.8.11) Bosch Power Tools
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: rbsa-hq.pt[email protected]
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation require-
ments. The user can transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport or forwarding agency), special
requirements on packaging and labelling must be observed. For preparation of the item be-
ing shipped, consulting an expert for hazardous material is required.
OBJ_BUCH-1208-002.book Page 18 Monday, August 1, 2011 8:12 AM