Bosch SKS40E02 User manual

XXXCPTDIIPNFDPNFXFMDPNF3FHJTUFSZPVSOFX#PTDIOPX%JTIXBTIFSFO0QFSBUJOHJOTUSVDUJPOT
SK...

6WDUW
K
K
K
K
K
K

5HVHWVHF 














en
3
Table of contents
8Intended use . . . . . . . . . . . . . . . 4
(Safety instructions . . . . . . . . . . 4
Before you switch ON the appliance . 4
Delivery. . . . . . . . . . . . . . . . . . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . 5
In daily use . . . . . . . . . . . . . . . . . . . . . 6
Door lock . . . . . . . . . . . . . . . . . . . . . . 6
Damage . . . . . . . . . . . . . . . . . . . . . . . 6
Disposal . . . . . . . . . . . . . . . . . . . . . . . 7
7Protection of the environment . 8
Packaging. . . . . . . . . . . . . . . . . . . . . . 8
Old appliances . . . . . . . . . . . . . . . . . . 8
*Getting to know your appliance 8
Control panel . . . . . . . . . . . . . . . . . . . 8
Appliance interior . . . . . . . . . . . . . . . . 8
+Water softening system/Special
salt . . . . . . . . . . . . . . . . . . . . . . . 9
Setting . . . . . . . . . . . . . . . . . . . . . . . . 9
Water hardness table . . . . . . . . . . . . . 9
Using special salt . . . . . . . . . . . . . . . 10
Detergents with salt component . . . . 10
Switching off water softening system 10
,Rinse aid . . . . . . . . . . . . . . . . . 11
Setting amount of rinse aid. . . . . . . . 11
Switching off rinse-aid refill indicator. 12
-Utensils . . . . . . . . . . . . . . . . . . 12
Not suitable . . . . . . . . . . . . . . . . . . . 12
Glass and utensil damage . . . . . . . . 12
Loading the dishwasher . . . . . . . . . . 12
Unloading the dishwasher . . . . . . . . 13
Basket . . . . . . . . . . . . . . . . . . . . . . . 13
Cutlery basket. . . . . . . . . . . . . . . . . . 13
Folding spikes . . . . . . . . . . . . . . . . . 13
Height of utensils . . . . . . . . . . . . . . . 13
.Detergent . . . . . . . . . . . . . . . . . 14
Adding detergent . . . . . . . . . . . . . . . 14
Combination detergent . . . . . . . . . . . 15
/Overview of programmes . . . . 16
Programme selection . . . . . . . . . . . . 17
Information for test institutes . . . . . . . 17
0Additional options . . . . . . . . . . 17
Express Wash/ Speed Perfect
(VarioSpeed). . . . . . . . . . . . . . . . . . . 17
Hygiene. . . . . . . . . . . . . . . . . . . . . . . 17
Extra drying. . . . . . . . . . . . . . . . . . . . 17
1Operating the appliance . . . . . 18
Programme data . . . . . . . . . . . . . . . . 18
Aqua sensor . . . . . . . . . . . . . . . . . . . 18
Switching on the appliance . . . . . . . . 18
Timer programming . . . . . . . . . . . . . 18
End of programme . . . . . . . . . . . . . . 19
Interrupting the programme . . . . . . . 19
Terminating the programme . . . . . . . 19
Changing the programme. . . . . . . . . 19
Intensive drying. . . . . . . . . . . . . . . . . 19
2Cleaning and maintenance . . . 20
Overall condition of the machine . . . 20
Special salt and rinse aid . . . . . . . . . 20
Filters . . . . . . . . . . . . . . . . . . . . . . . . 20
Spray arm . . . . . . . . . . . . . . . . . . . . . 21
3Fault, what to do? . . . . . . . . . . 21
Waste water pump . . . . . . . . . . . . . . 22
Fault table . . . . . . . . . . . . . . . . . . . . . 23
4Customer service . . . . . . . . . . . 31

en Intended use
4
5Installation and connection . . 31
Product package . . . . . . . . . . . . . . . 31
Safety instructions. . . . . . . . . . . . . . . 31
Delivery. . . . . . . . . . . . . . . . . . . . . . . 32
Technical specifications . . . . . . . . . . 32
Installation. . . . . . . . . . . . . . . . . . . . . 32
Waste-water connection . . . . . . . . . . 32
Drinking water connection . . . . . . . . 32
Electrical connection. . . . . . . . . . . . . 33
Removing the appliance . . . . . . . . . . 33
Transportation. . . . . . . . . . . . . . . . . . 33
Protection against frost (Emptying the
appliance). . . . . . . . . . . . . . . . . . . . . 33
8Intended use
Intended use
This appliance is intended for
use in the home and
the home environment.
Use the dishwasher
only in the household
and only for its designed
purpose: for washing
domestic dishes.
(Safety instructions
Safety instructions
Children from 8 years of age
or people whose physical,
sensory or mental abilities
or their lack of experience
or knowledge prevent them
from using the appliance safely
must not use this appliance
without supervision
or instruction by a responsible
person.
Before you switch ON
the appliance
Please read the operating
and installation instructions
carefully. They contain
important information on how to
install, use and maintain
the appliance.
Retain all documents for
subsequent use or for the next
owner.

Safety instructions en
5
Delivery
1. Check the packaging and
dishwasher immediately for
damage caused in transit. Do
not switch on a damaged
appliance, but contact your
supplier.
2. Please dispose of the
packaging material in an
environmentally friendly
manner.
3. Do not let children play with
packaging and its parts.
There is a risk of suffocation
from collapsible boxes and
film.
Installation
Following installation, ensure
that the back
of the dishwasher is not
freely accessible (protection
against contact due to hot
surface).
Install and connect
the appliance according
to the installation
and assembly instructions.
Prior to installation,
disconnect the dishwasher
from the power supply.
Ensure that the protective
conductor system
of the domestic supply has
been correctly installed.
The electrical connection
conditions must correspond
with the specifications
on the dishwasher rating
plate 1b.
If the power cord of this
appliance is damaged,
it must be replaced with
a particular power cord.
To prevent injury, the power
cord may be purchased from
customer service only.
If the dishwasher is installed
in a high-sided unit, the unit
must be secured properly.
If the dishwasher is installed
below or above other
domestic appliances, follow
the information for installation
in combination with
a dishwasher
in the installation instructions
for the particular appliances.
Also follow the installation
instructions for
the dishwasher to ensure
that all appliances are
operated safely.
If there is no information or if
the installation instructions
do not include
the appropriate information,
contact the manufacturer
of these appliances
to ensure that
the dishwasher can be
installed above or below
these appliances.

en Safety instructions
6
If you cannot obtain any
information from
the manufacturer, you must
not install the dishwasher
above or below these
appliances.
If you install a microwave
oven above the dishwasher,
the microwave oven may be
damaged.
Do not install the appliance
near heat sources (radiators,
heat storage tanks, cookers
or other appliances which
generate much heat)
and install it under
a hob only in consideration
of the stipulated safety
clearances.
After installing the appliance,
ensure that the plug is easily
accessible.
(See Electrical connection)
Some models:
The plastic housing on the
water connection contains
an electric valve,
the connecting cables
are in the supply hose.
Do not cut through this hose,
do not immerse the plastic
housing in water.
In daily use
Read and observe the safety
information and instructions
for use on the packaging
for cleaning and rinsing agents.
Childproof lock (door lock) Door lock *
The description of the
childproof lock is at the back in
the envelope.
* depending on model
Damage
The appliance may be
repaired and opened up by a
technician only. To do this,
disconnect the appliance
from the power supply. Pull
out the mains plug or switch
off the fuse. Turn off the tap.
If the appliance is damaged,
especially the fascia (cracks,
holes, broken buttons), or the
door function is impaired,
stop operating the appliance.
Pull out mains plug or switch
off fuse. Turn off tap, call
customer service.

Safety instructions en
7
Disposal
1. Make redundant appliances
unusable to prevent
subsequent accidents.
2. Dispose of the appliance in a
n environmentally friendly
manner.
m Warning
Risk of injury!
Knives and other utensils
with sharp points must be
placed in the cutlery basket
with the points
downwards or horizontally on
the knife shelf*.
Do not lean or sit
on the open door.
In the case of free-standing
appliances, ensure that the
baskets are not overloaded.
* depending on model
m Warning
Risk of explosion!
Do not add any solvents
to the washing chamber.
Danger of explosion!
m Warning
Risk of scalding!
Open the door carefully when
the programme is still running.
There is a risk of hot water
spraying out of the appliance.
m Warning
Risks to children!
If fitted, use the childproof
lock. An exact description
can be
found in the back of the enve
lope.
Do not allow children to play
with or operate
the appliance.
Keep children away from
detergents and rinse aid.
These may cause chemical
burns in the mouth, throat
and eyes or asphyxiation.
Keep children away from
open dishwasher.
The water in the rinsing
compartment is not drinking
water and could contain
detergent residue.
When opening and closing
the door on an eye-level
appliance, ensure that
children do not become
jammed or crushed between
the appliance door and the
cupboard door below.
Children could become
locked in the appliance
(danger of suffocation) or get
into another dangerous
situation.
Redundant appliances: Pull
out the mains plug, sever
and dispose of the power
cord. Destroy the door lock
so that the door can no
longer be closed.

en Protection of the environment
8
7Protection of the
environment
Protection ofthe environment
Both the packaging of new appliances
and the old appliances themselves
contain valuable raw materials
and recyclable materials.
Please dispose of the individual parts
separated according to type.
Please ask your dealer or inquire at your
local authority about current means
of disposal.
Packaging
All plastic parts of the appliance are
identified with internationally
standardised abbreviations (e.g. >PS<
polystyrene). Therefore, plastic waste
can be sorted out when the appliance is
being disposed of.
Please follow the safety instructions
under “Delivery”.
Old appliances
Please follow the safety instructions
under “Disposal of your appliance”.
*Getting to know your
appliance
Getting toknow your appliance
Diagrams of the control panel
and the interior of the appliance can be
found in the envelope at the front.
Individual positions are referred
to in the text.
Control panel
* depending on model
** Number depending on model
Appliance interior
This appliance is identified
according to the European
guideline 2012/19/EU on waste
electrical and electronic
equipment – WEEE. The
guideline specifies the
framework for an EU-wide valid
return and re-use of old
appliances.

(ON/OFF switch
0Programme selector
8START button
@Timer programming *
HAdditional options **
PRinse aid refill indicator
XSalt refill indicator
`Display “Check water supply”
hDry display
)" Cleaning display
1" Spray arm
1* Filters
12 Dispenser for special salt
1: Cutlery basket
1B Basket
1J Dispenser for rinse aid
1R Detergent dispenser
1Z Lock for detergent dispenser
1b Rating plate

Water softening system/Special salt en
9
+Water softening
system/Special salt
Water softening system/Special salt
To ensure good washing results,
the dishwasher requires soft water, i.e.
containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above a specific
degree of water hardness must be
softened, i.e. descaled,
for use in a dishwasher. Water
is softened with special salt in the water
softening system of the dishwasher.
The setting and therefore the required
amount of salt
depends on the degree of hardness of
your tap water (see table).
Setting
The amount of salt dispensed can be
set in 4 stages
depending on the hardness of your
water. Accordingly 0, 1, 2 or 3 displays
are lit (see table). Factory setting: 1.
1. Find out about the hardness
value of your tap water. Your water
utility company will help you with this.
2. Setting can be found in the water
hardness table.
3. Close the door.
4. Switch on ON/OFF switch (.
The Cleaning display )" flashes.
5. Press and hold down the START
button 8.
6. Rotate programme selector 0until
the salt refill indicator Xflashes.
7. Release button.
The salt refill indicator Xflashes
and the display “Check water
supply” `are lit (= Setting 1).
To change the setting:
1. Rotate programme selector 0until
the required setting has been
selected.
2. Press START button 8.
The salt refill indicator Xgoes out.
The selected setting is saved.
Water hardness table



&ODUNH
 VRIW
 PHGLXP
 KDUG
 KDUG
PPROO




+DUG HVV
UD JH
6HWWLQJ





en Water softening system/Special salt
10
Using special salt
Always refill with special salt
immediately before switching on the
appliance. This ensures that overrun
special salt solution is immediately
washed out and does not corrode the
rinsing tank.
1. Open the screw-type cap of the
compartment 12.
2. Fill the tank with water (only required
when switching on the appliance for
the first time).
3. Then add dishwasher salt (not table
salt or tablets).
The water is displaced and runs out.
As soon as the salt refill indicator X
on the fascia is lit, top up the salt.
* depending on model
Using detergents with salt
component
Detergents with salt component
If combined detergents with a salt
component are used, salt can usually be
omitted up to a water hardness of
21° dH (37° fH, 26° Clarke, 3.7 mmol/
l). If the water hardness is over 21° dH,
special salt must be used.
Switching off water softening system Switching off salt refill
indicator/water softening
system
If the salt refill indicator Xis impaired
(e.g. when using combined detergents
containing salt component), it can be
switched off.
Proceed as described under
“Adjusting the water softening
system” and select setting 0.
The water softening system and salt
refill indicator are now switched off.
mCaution
Never fill the salt dispenser with
detergent. You will destroy the water
softening system.


Rinse aid en
11
,Rinse aid
Rinse aid
As soon as the rinse-aid refill
indicator Pis lit on the fascia, there
is still a rinse-aid reserve of 1-2 rinsing
processes. Refill with rinse aid.
The rinse aid is required for stain-free
utensils and clear glasses. Use only
rinse aid for domestic dishwashers.
Combined detergents with rinse-aid
component may be used up to a water
hardness of 21° dH (37° fH,
26° Clarke, 3.7 mmol/l) only. If
the water hardness is over 21° dH,
rinse aid must be used.
1. Open the dispenser 1J by pressing
and lifting the plate on the cover.
2. Carefully pour rinse aid up
to the max. mark in the filler opening.
3. Close cover until it clicks shut.
4. To prevent excessive foam formation
during the next rinse cycle, remove
any rinse aid which has run over with
a cloth.
Setting amount of rinse aid
The amount of rinse aid dispensed can
be set in 4 stages. Accordingly 0, 1, 2
or 3 displays are lit (see water hardness
table).
Factory setting: 2.
Do not change the amount of rinse aid
unless streaks (select lower
setting) or water stains (select higher
setting) are left on the utensils.
1. Close the door.
2. Switch on ON/OFF switch (.
The Cleaning display )" flashes.
3. Press and hold down the START
button 8.
4. Rotate programme selector 0until
the rinse aid refill indicator P
flashes.
5. Release button.
The rinse aid refill indicator P
flashes and the displays h
and `are lit (= Setting 2).
To change the setting:
1. Rotate programme selector 0until
the required setting has been
selected.
2. Press START button 8.
The rinse-aid refill indicator Pgoes
out. The selected setting is saved.


PD[

en Utensils
12
Switching off rinse-aid refill
indicator
If the rinse-aid refill indicator Pis
impaired (e.g. when using combined
detergents containing rinse-aid
component), it can be switched off.
Proceed as described under “Setting
amount of rinse aid” and select
setting 0.
The rinse aid refill indicator Pis now
switched off.
-Utensils
Utensils
Not suitable
Cutlery and utensils made of wood.
Delicate decorative glasses, craft
and antique utensils. These decors
are not dishwasher-proof.
Plastic parts not resistant to heat.
Copper and tin utensils.
Utensils which are soiled with ash,
wax, lubricating grease or ink.
Aluminium and silver parts have a
tendency to discolour and fade during
the wash cycle. Even some types of
glass (e.g. crystal glass objects) may
turn cloudy after many wash cycles.
Glass and utensil damage
Causes:
Glass type and glass production
process.
Chemical composition of the
detergent.
Water temperature of the wash
programme.
Recommendation:
Use only glasses and porcelain
which the manufacturer designates
as dishwasher-proof.
Use a detergent which protects
utensils.
Take glass and cutlery out of the
dishwasher as soon as possible after
the programme ends.
Loading the dishwasher
1. Remove large food remnants. It is
not necessary to prerinse utensils
under running water.
2. Place the utensils so that
– they are secure and cannot tip
over.
– all utensils with their openings
face down.
– parts with curves or indentations
are at an angle, thereby allowing
water to drain.
– the spray arm 1" can still rotate
freely.
Very small utensils should not be
washed in the dishwasher, as they can
easily fall out of the utensils basket 1B.

Utensils en
13
Unloading the dishwasher
Hot utensils are sensitive to shock!
Therefore, when the programme ends,
leave the utensils to cool down in the
dishwasher until they can be handled.
Note
When the programme ends, water
droplets can still be seen inside
the appliance. This does not affect
the drying of the utensils.
Basket Basket 1B
Cutlery basket
You should always place cutlery
unsorted with the points downwards.
To prevent injuries, place long, pointed
implements and knives on the knife
shelf.
Folding spikes Folding spikes *
* depending on model
The spikes can be folded down to
improve arrangement of pans, bowls
and glasses.
Height of utensils
The maximum height of the utensils
is 28 cm.


en Detergent
14
.Detergent
Detergent
You can use tablets as well as powder
or liquid detergents for dishwashers, but
never use washing up liquid.
The dosage can be individually adjusted
with powder or a liquid detergent
according to the degree of soiling.
Tablets contain an adequately large
amount of active ingredients
for all cleaning tasks. Modern, powerful
detergents predominantly use a low-
alkaline formulation with phosphate
and enzymes. Phosphates bond
the lime in the water. Enzymes break
down starch and remove protein.
Phosphate-free detergents are less
frequent. These have a slightly weaker
lime bonding capacity and require
a higher dosage. To remove coloured
stains (e.g. tea, tomato sauce), oxygen-
based bleaching agents are usually
used.
Note
To ensure a good washing result,
always follow the instructions
on the detergent packaging!
If you have further questions,
we recommend that you contact
the detergent manufacturers’ helpline.
mWarning – Read and observe the
safety information and instructions for
use on the packaging for cleaning and
rinsing agents.
Adding detergent
1. If the detergent dispenser 1R is still
closed, press the lock 1Z to open
the detergent dispenser.
Pour detergent into the dry detergent
dispenser 1R only (insert tablet flat,
not on its edge).
Dosage: see manufacturer’s
instructions on the packaging.
The graduated detergent
dispenser 1R helps you add the
correct amount of powder or liquid
detergent.
2. Close the cover on the detergent
dispenser by sliding it up until the
lock engages without difficulty.
The detergent dispenser opens
automatically at the optimum time
depending on the programme.
The powder or liquid detergent is
distributed in the appliance and is
dissolved. The tablet falls into the
appliance and dissolves.
PO
PO
PO

Detergent en
15
Tip
If the utensils are only lightly soiled,
slightly less than the indicated amount
of detergent is usually adequate.
Suitable detergents and care products
can be purchased online
via our website or via customer service
(see back page).
Combination detergent
Apart from conventional detergents
(Solo), a number of products are offered
with additional functions. These
products contain not only the detergent
but also rinse-aid and salt replacement
substances (3in1) and, depending
on the combination (4in1, 5in1, etc.),
additional components such as glass
protection or stainless steel cleaner.
Combination detergents function only
up to a specific degree of hardness
(usually 26° Clarke). Over this limit salt
and rinse-aid must be added.
As soon as combined detergents
are used, the rinse programme
is adjusted automatically to ensure
the best possible rinsing and drying
result.
Notes
You will obtain optimum rinsing
and drying results by using solo
detergents and applying salt and
rinse aid separately.
If programmes are short, tablets
may not have full cleaning effect
due to different dissolving properties
and there may even be undissolved
detergent residue. It is
recommended to use washing
powder for these programmes.
Even if the rinse-aid and/or salt refill
indicator is lit, the rinse programme
will run correctly with combined
detergents.
If using detergents in a water-soluble
protective cover: Take hold of the
cover with dry hands only and put
the detergent into an absolutely
dry detergent dispenser only,
otherwise the detergent may stick.
If you switch from combined
detergents to solo detergents,
ensure that the water softening
system and amount of rinse aid have
been set to the correct value.

en Overview of programmes
16
/Overview of programmes
Overviewofprogrammes
The max. possible number of programmes is illustrated in this overview.
The corresponding programmes and their arrangement can be found on the
fascia.
Type of utensils Type of soiling Programme Possible
additional
options
Programme sequence
pots and pans,
non-sensitive
utensils
and cutlery
very adhesive burned-
in or dried-on food
remnants containing
starch or protein
±/ °
Intensive 70°
all
Prerinse
Clean 70°
Intermediate rinse
Final rinse 65°
Drying
Ù/ Ø
Normal 65°
all
Prerinse
Clean 65°
Intermediate rinse
Final rinse 65°
Drying
mixed utensils
and cutlery
part dried, common
household food
remnants
Ù/ Ø
Normal 65°
all
Prerinse
Clean 65°
Intermediate rinse
Final rinse 65°
Drying
â/ à
Eco 50°
all
Prerinse
Clean 50°
Intermediate rinse
Final rinse 65°
Drying
sensitive utensils,
cutlery,
temperature-
sensitive plastic
and glasses
slightly adhesive,
fresh food remnants
é/ è
Gentle 40°
IntensivZone
Express Wash/
Speed Perfect
(VarioSpeed)
Extra drying
Prerinse
Clean 40°
Intermediate rinse
Final rinse 55°
Drying
ñ/ ð
Quick 45°
Extra drying
Clean 45°
Intermediate rinse
Final rinse 55°
all types
of utensils
cold rinsing,
intermediate cleaning
ù/ ø
Prerinse
none Prerinse

Additional options en
17
Programme selection
You can select a suitable programme
according to the type of utensils and
degree of soiling.
Information for test institutes
Test institutes receive the information for
comparability tests (e.g. according to
EN60436).
These are the conditions for conducting
the tests, however these are not the
results or consumption values.
Request by e-mail to:
[email protected]
The product number (E no.) and the
production number (FD) are required
which you can find on the rating plate
1b on the appliance door.
0Additional options
Additional options
* depending on model
Additional options can be set with
the buttons H.
Express Wash/ Speed Perfect (VarioSpeed) ŸExpress Wash/ Speed
Perfect/ (VarioSpeed) *
This function can reduce the running
time by approx. 20% to 50% depending
on the selected rinse programme. To
obtain optimum cleaning and drying
results at a reduced running time, water
and energy consumption are increased.
·Hygiene * Hygiene
The temperature is increased during the
cleaning process. This increases the
hygiene status. This additional option is
ideal for cleaning e.g. chopping boards
and baby bottles.
¿Extra drying * Extra drying
An increased temperature during the
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.

en Operating the appliance
18
1Operating
the appliance
Operating theappliance
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to
normal conditions and the water
hardness set value 2. Different
influencing factors such as water
temperature or mains pressure may
result in deviations.
Aqua sensor Aqua sensor *
* depending on model
The Aqua sensor is an optical
measuring device (light barrier) which
measures the turbidity of the rinsing
water.
The Aqua sensor is used according to
the programme. If the Aqua sensor is
active, “clean” rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
2–4 litres. If the turbidity is greater, the
water is drained and is replaced with
fresh water. In the automatic
programmes the temperature and
running time can also be adjusted to the
degree of soiling.
Switching on the appliance
1. Turn on the tap fully.
2. Close the door.
3. Switch on ON/OFF switch (.
The Cleaning display )" flashes.
4. Rotate programme selector 0
to the required programme.
5. Press START button 8.
The Cleaning display )" is lit. The
programme starts running.
Note
- for environmentally friendly operation
of the dishwasher:
The Eco 50° programme is a
particularly environmentally friendly
programme. According to EU
regulation 1016/2010 it is the
“Standard programme” which is the
most efficient standard cleaning cycle
for cleaning normally soiled utensils in
terms of the combined energy and
water consumption for cleaning these
types of utensils.
Timer programming Timer programming *
* depending on model
You can delay the start of the
programme by 3, 6 or 9 hours.
1. Switch on ON/OFF switch (.
2. Keep pressing the Preselected
starting time button @until the
appropriate display 3h, 6h or 9h is lit.
3. Press START button 8, timer
programming is activated.
4. To delete the preselected starting
time, keep pressing the Preselected
starting time button @until none of
the displays 3h, 6h or 9h is lit.
You can change your programme
selection at any time until the
programme starts.

Operating the appliance en
19
End of programme
The programme has ended when
neither of the two displays hor )" is
lit.
Note
To save energy, the dishwasher
automatically switches off after the end
of the programme.
Interrupting the programme
1. Switch off ON/OFF switch (.
The LEDs go out. The programme is
saved.
If the door was opened on an
appliance which has a warm water
connection or is heated, first leave
the door ajar for several minutes and
then close. Otherwise, expansion
(pressure) may cause the appliance
door to spring open or water to run
out of the appliance.
2. To continue the programme, switch
on the ON/OFF switch (again.
Terminating the programme Terminating the programme
(Reset)
1. Press START button 8for
approx. 3 sec. until all displays go
out.
2. The remaining programme sequence
for draining the residual water takes
approx. 1 minute.
Changing the programme
When the START button 8has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
Intensive drying
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
The Cleaning display )" flashes.
3. Press and hold down the START
button 8.
4. Rotate programme selector 0until
the “Check water supply” display
`flashes.
5. Release button.
To change the setting:
1. By rotating the programme selector
0, you can switch on intensive
drying (Dry display h
is lit) or switch off intensive drying
(Dry display his not lit).
2. Press START button 8.
The setting is saved.

en Cleaning and maintenance
20
2Cleaning and
maintenance
Cleaning and maintenance
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
Check spray arm for grease
and limescale deposits.
If you find such deposits:
Fill detergent dispenser with
detergent. Start the appliance without
utensils in the programme with
the highest rinsing temperature.
Clean the appliance with detergents/
appliance cleaners which
are particularly suitable for use with
dishwashers.
To ensure that the door seal always
remains clean and hygienic, regularly
clean it with a damp cloth and a little
washing-up liquid.
If the appliance is switched off for
a prolonged period, leave the door
ajar to prevent the formation of
an unpleasant odour.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not
liable for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water
and a little washing up liquid
are adequate. Do not use sponges with
a rough surface or abrasive detergents,
as these could scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths
or wash them out thoroughly several
times before using for the first time.
mWarning – Health hazard
Never use other domestic detergents,
e.g. containing chlorine!
Special salt and rinse aid
Check the refill indicators Xand
P. If required, refill salt and/or
rinse aid.
Filters
The filters 1* keep large foreign
objects in the rinsing water away from
the pump. These foreign objects may
occasionally block the filters.
The filter system consists of a coarse
filter, a flat fine filter and a microfilter.
1. After each washing cycle check the
filters for residue.
2. Unscrew filter cylinder as illustrated
and take out filter system.