
Microwave en
17
¡To prevent condensation, the appliance automatic-
ally switches on a heating element at the maximum
microwave power settings of 600watts and max.
The cooking compartment and the accessories be-
come hot. The cooking result is not affected by this.
You can switch off this drying function in the basic
settings.
→"Basic settings", Page20
WARNING‒Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
▶Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶Keep children at a safe distance.
1. Press .
2. Press "Microwave".
3. Press the button for the microwave power setting
that you require.
4. Use the control ring to set the cooking time.
5. Press to start.
aThe microwave starts and the cooking time counts
down. The heating line does not appear.
aWhen the time has elapsed, a signal sounds. The
time shown in the display is zero.
6. When the cooking time has elapsed:
‒To stop the signal early, press any touch field.
‒If necessary, set a microwave power setting and
a cooking time again.
‒When the food is ready, press to switch the
appliance off.
7. If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
→"Drying", Page24
Note:If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you have to press to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
→"Basic settings", Page20
Changing the microwave power setting
If you change the microwave power setting, the set
cooking time set is retained.
1. Press to pause operation.
2. Press the button for the microwave power setting
that you require.
3. Press to continue operation.
Changing the cooking time
After the start of the microwave operation, you can
change the cooking time directly.
▶Use the control ring to change the cooking time.
aThe change is applied immediately.
11.3 MicroCombi
To reduce the cooking time, you can use some types
of heating in combination with microwave mode.
Possible types of heating are:
¡4Dhot air
¡Top/bottom heating
¡Circulated air grilling
¡Grill, large area
¡Grill, small area
Possible microwave power settings are:
¡90watts
¡180watts
¡360watts
Setting MicroCombi
Note:
Note the correct way to handle the microwave:
¡→"Safety", Page2
¡→"Preventing material damage", Page6
¡→"Microwave power settings", Page11
¡→"Cookware and accessories with microwave",
Page16
1. Press .
2. Press "MicroCombi".
3. Press the type of heating that you want to use.
4. Press the button for the microwave power setting
that you require.
5. Use the control ring to set the temperature.
6. Press the cooking time and use the control ring to
set the cooking time.
7. Press to start.
aThe appliance starts to heat and the cooking time
counts down.
aWhen the time has elapsed, a signal sounds. The
time shown in the display is zero.
8. When the cooking time has elapsed:
‒To stop the signal early, press any touch field.
‒If necessary, set a combination again.
‒When the food is ready, press to switch the
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
▶Use the control ring to change the temperature.
aThe change is applied immediately.
Changing the cooking time
After the start of the MicroCombi operation, you can
change the cooking time at any time.
1. Press "Cooking time".
2. Use the control ring to change the cooking time.
aThe change is applied immediately.
Changing the combination
If you change the combination of the type of heating
and the microwave power setting, all of the other set-
tings are reset.
1. Press to pause operation.
2. Change the type of heating or microwave power set-
ting.
‒To change the microwave power setting, press
on the microwave and change the microwave
power setting.
‒To change the type of heating, press on the type
of heating and change the type of heating. Then
set the microwave power setting.
3. Press to continue operation.