NL
Switch on device Set up
the temperature
Fig. †
1. Plug in the mains plug. Cold room
2. The alarm signal sounds. The
temperature display 3 flashes. Turn the temperature control, Fig. !/8,
to the desired setting.
3. Press the temperature setting button 1.
The alarm signal goes off. We recommend the setting on the
marking.
As soon as the freezer compartment has
reached the set temperature,
temperature display 3 lights up.
By changing the setting clockwise, the
temperature in the refrigerator
compartment decreases.
The factory recommends the
following settings: At a room temperature below 16 °C, set
the device slightly warmer. At a room
temperature above 32 °C, set the device
slightly colder.
■Cold room: medium setting
■ Freezer compartment: -18 °C
Store sensitive foods in the refrigerator
compartment.
Selecting a very cold setting
momentarily only if:
■ the door is often opened,
Instructions for use ■ large quantities of food are
placed in the refrigerator
compartment.
■ After switching on, it can take several
hours before the set temperatures are
reached.
■ The fully automatic NoFrost system keeps
the freezer compartment free of ice.
Defrosting is unnecessary.
freezer room
The temperature is adjustable from -18 °C
to -24 °C.
■ The front of the appliance behind the
door becomes partially light
heated to prevent the formation of
condensation near the door seal.
Press the temperature setting button 1
repeatedly until the desired temperature is
set in the freezer compartment.
The last set value is stored in memory.
The set temperature is displayed on the
temperature indicator 3 indicated.
■If the door of the freezer compartment
cannot be opened again immediately
after closing, you must wait a while
until the negative pressure has
disappeared.
75
