Bosch DINION XF LTC 0495 User manual

CCTV | LTC 0495 Series DinionXF Day/Night Cameras
Security you can rely on.
LTC 0495
Series DinionXF Day Night
Cameras
• 15-bit DSP Technology
• High sensitivity
• Mechanically switching IR filter for
IR sensitivity at night
• XF-Dynamic for unsurpassed
wide dynamic range
• Bilinx Communication for remote
set-up and control
• Default Shutter eliminates motion
blurring
• Four area video motion detection
• 540 TVL resolution
The LTC 0495 High Performance 1/3-inch Digital CCD
Day/Night Camera ensures the highest image quality possible
at any time. Depending on the available light the camera will
automatically switch from color to monochrome.
A unique combination of 15-bit digital video processing that
enhances sensitivity and XF-Dynamic which extends the
dynamic range provides a sharper, more detailed image with
outstanding accuracy in color reproduction.
All Dinion cameras are supplied ready to operate. Simply
attach and focus the lens, then connect power. No tools are
required for back focus and power connection. For especially
challenging situations where fine tuning or special settings are
required, the camera parameters can be individually set using
the control buttons on the side of the camera and On-screen
Display (OSD). The camera automatically detects the lens
type. The Lens Wizard ensures accurate back-focusing for
perfectly sharp pictures at all times.
Functions
XF-Dynamic
The highly accurate 15-bit digital signal is automatically
processed to optimally capture the detail in both the high and
low light areas of the scene simultaneously, maximizing the
information visible in the picture.
Bilinx Technology
Bilinx is a bi-directional communication capability embedded
in the video signal of all Bosch Dinion cameras. Technicians
can check status, change camera settings and even update
firmware from virtually anywhere along the video cable. Bilinx
reduces service and installation time, provides for more
accurate set-up and adjustment, and improves overall
performance. In addition, Bilinx uses the standard video cable
to transmit alarm and status messages, providing superior
performance without additional installation steps.

2 | LTC 0495 Series DinionXF Day/Night Cameras
Video Motion Detection
The built-in video motion detector allows you to select up to
four fully programmable areas with individual thresholds. The
global scene change detector minimizes false alarms caused by
sudden lighting condition changes, such as switching on or off
the indoor or security lighting. When motion is detected
alarms may be displayed in the video signal while the output
relay can be closed in addition to alarm message transmission
on Bilinx.
Auto Black
The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).
Default Shutter
The LTC 0495 features a fast, default shutter speed in sufficient
lighting conditions to capture moving objects. When light
levels fall and other adjustments have been exhausted, the
shutter speed reverts to the standard setting to maintain
sensitivity.
Back Light Compensation (BLC)
Offering a fully programmable BLC area of interest, and a
variable BLC level, the camera can be easily set up for even the
most challenging entrance applications.
Lens Wizard
The Lens Wizard automatically detects the lens type and helps
focus the lens at the maximum opening to ensure proper focus
is maintained throughout the 24-hour cycle. No special tools
or filters are required.
Programmable Modes
Three independent, preprogrammed operating modes
support typical applications, but are fully programmable for
individual situations. Switching between modes is easy via
Bilinx or the external alarm input.
Day/Night Mode
The Day/Night Mode LTC 0495 provides enhanced night
viewing by increasing the IR sensitivity. The IR filter can
switch from color to monochrome automatically by either
sensing the illumination level or via the alarm input. The filter
can be switched manually via the alarm input, through the
camera menu or via the Bilinx coaxial control interface. An
internal through the lens IR detector enhances the
monochrome mode stability, as it prevents reverting to the
color mode when IR illumination is dominant.
SensUp
By increasing the integration time on the CCD up to 10 times,
the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight for
illumination.
Parts Included
Certifications and Approvals
Installation/Configuration Notes
Dimensions in mm (inches)
Quantity Component
1LTC 0 4 9 5 S e r i e s D i n i o n XF Day\Night Camera
1C/CS – mount conversion ring
1Spare male 4 – pin lens connector
Lens not included
Electro Magnetic Compatibility
Emission EN55022 class B, FCC class B part 15
Immunity EN50130-4 Alarm Systems, Part 4
Vibration Camera with 500 g (1.1 lbs) lens according
to IEC60068-2-27
Safety
LTC 0495/11 and LTC 0495/51: EN60065
LTC 0495/21 and LTC 0495/61: UL6500, cUL CAN/CSA E60065-
00
59 (2.323")
67 (2.638")
122 (4.803")
48 (1.889")
117 (4.606")
85 (3.346)
Dimensions in mm (inches).
Dinion
XF
Day/Night Camera
LENS 4-PIN 1/4"-20 UNC
1/4"-20 UNC
33 (1.30)
Dinion
XF
Day/Night Camera
133 (5.236")
Dinion
XF
Day/Night Camera

3 | LTC 0495 Series DinionXF Day/Night Cameras
Data subject to change without notice | Printed in USA | | 22. Jul 2005
Americas:
Bosch Security Systems
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone:[phone]
[phone]
[e-mail]
http://www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone:[phone]
Fax:[phone]
emea.securitysy[email protected]
http://www.boschsecurity.com
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone:[phone]
Fax:[phone]
apr.security[email protected]
http://www.boschsecurity.com
1) F/1.2, 89% reflection, SenseUp off
Technical Specifications
Electrical
Model No. Rated Voltage
LTC 0 49 5 /11 12 - 28 VAC
11 - 39 V D C
45 - 65 Hz
LTC 0495/21 12 - 28 VAC
11 - 39 V D C
45 - 65 Hz
LTC 0 4 9 5 / 51 110 - 240 VAC 45 - 65 Hz
LTC 0495/61 110 - 240 VAC 45 - 65 Hz
Power Consumption 4 W
CCD Type 1/3-inch interline
Active Pixels
PAL Model: 752 x 582
NTSC Model 768 x 492
Sensitivity (3200 k)
Sensitivity
(Full video) 1)
2.4 lux (0.24 fc)
Sensitivity
50 IRE1)
0.59 lux / 0.08 lux (Monochrome mode)
Minimum
illumination1)
0.24 lux / 0.038 lux (Monochrome mode)
Minimum Illumination with
SensUp
0.024 lux / 0.0038 lux (Monochrome
mode)
Horizontal Resolution 540 TVL
Signal-to-Noise Ratio > 50 dB
Video Output 1 Vp-p, 75 ohm
Y/C Output Y: 1 Vp-p / C: 0.3 Vp-p
Synchronization Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Sensitivity up Off, Automatic continuous up to 10x
Auto Black On, Off selectable
Range 32x dynamic range enhancement
Dynamic Noise
Reduction
Auto, Off selectable
Contour Sharpness enhancement level selectable
BLC Off, Area and Level selectable
Gain Auto (maximum level selectable to 28 dB)
or fixed level selectable
Lens Mount CS (max lens protrusion 5 mm, 0.2 in,)
White Balance ATW (2500 - 10000 K), AWB hold,
Manual WB selectable
VMD 4 area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input
(TTL)
Profile switching, +5 V nominal, +40 VDC
max
Alarm Output Relay max. 30 VAC or +40 VDC, Max 0.5 A
continuous, 10 VA
External Synchronal Input 75 ohm or High Impedance selectable
Cable
Compensation
Up to 1000 m (3000 ft.) coax without
external amplifiers (automatic set-up in
combination with coaxial communication)
Camera ID 16 character editable string, position
selectable
Lens Types Manual, DC- and Video-Iris auto-detect
with override DC-iris drive: max. 50 mA
continuous
Video-iris: 11.5 ± 0.5 VDC, max 50 mA
continuous
Remote Control Bilinx coaxial communication
Mechanical
Dimensions
(H x W x L)
59 x 67 x 122 mm
(2.28 x 2.6 x 4.8 in.)
without lens
Weight 450 g (0.99 lbs) without lens
Tripod Mount Bottom (isolated) and top 1/4-inch
20 UNC
Controls OSD with softkey operation
Environmental
Operating Temperature -20°C to +50°C (-4°F to 122°F)
Storage Tem pe ra tu re -25°C to +70°C (-13°F to +158°F)
Operating Humidity 20% to 93% RH
Storage Humidity up to 98% RH
Electrical

4 | LTC 0495 Series DinionXF Day/Night Cameras