Bose CineMate 130 User manual

CineMate ®130
home theater system
Owrle_s G_de / G_a de _s_a o / I_lol:ce d_ sator_

Important Safety Information
Please read this owner's guide carefully and save it for future reference.
z_The lightningflashwith arrowheadsymbolwithinanequilateraltrianglealertsthe usertothe presenceof
uninsulated,dangerousvoltagewithinthe systemenclosurethatmaybeofsufficientmagnitudeto
constitutea riskofelectricshock.
The exclamationpointwithinanequilateraltrianglealertsthe usertothepresenceof importantoperating
and maintenanceinstructionsin theowner's guide.
z_ WARNINGS:
.Toreducetheriskoffireor electricshock,donotexposethisproducttorain or moisture.
.Donot exposethisapparatusto drippingor splashing,and donot placeobjectsfilled with liquids,suchas
vases,onor neartheapparatus.Aswith any electronicproducts,use carenotto spillliquidsintoany part
of theproduct.Exposuretoliquidsmay createa failureand/orfirehazard.
.ReplaceonlywithaAA (lEOLR06)alkaline battery(orbatteries).
.Do notplacenakedflamesources,suchas lightedcandles,onor neartheproduct.
CAUTIONS:
.Do notmakeunauthorizedalterationstothe product;doingso maycompromisesafety,regulatory
compliance,systemperformance,andmayvoidthewarranty.
.Long-termexposuretoloudmusicmay causehearingdamage.It isbesttoavoidextremevolumewhen
usingheadphones,especiallyfor extendedperiods.
QWARNING:
Containssmall partswhich maybeachokinghazard.Notsuitablefor childrenunderage 3.
WARNING:This productcontainsmagneticmaterial.Contactyourphysicianif you havequestionsonwhetherthis
mightaffecttheoperationof yourimplantablemedicaldevice.
NOTES:
. Theproductlabel islocatedonthebottomoftheconsole.
.Wherethemainsplugor appliancecoupleris usedas thedisconnectdevice,suchdisconnectdeviceshall remain
readilyoperable.
.Thisproductmustbe usedindoors.It isneitherdesignednortestedfor useoutdoors,in recreationalvehicles,or
onboats.
.Thespeakerwire andinterconnectcablesincludedwith thesystemare notapprovedfor in-wallinstallation.
Pleasecheckyourlocal buildingcodesfor thecorrecttype ofwireandcablerequiredfor in-wallinstallation.
f BoseCorporationherebydeclaresthatthis productisin compliancewith theessentialrequirements
t. andotherrelevantprovisionsofDirective1999/5/ECandallotherapplicableEUdirective
requirements.The completedeclarationofconformitycan befoundat:www.Bose.com/compliance
2 - English

Important Safety Information
Important Safety Instructions
1. Read these instructions.
2. Keepthese instructions.
3. Heed atlwarnings.
4. Follow allinstructions.
5. Do not use thisapparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilationopenings. Install in accordancewith the manufacturer's instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Protectthe powersupply or cordfrom beingwalked on or pinched, particularlyat plugs,convenience receptacles,and the
pointwhere they exit from the apparatus.
10. Only use attachments/accessories specifiedby the manufacturer.
11. Unplugthis apparatus duringlightning stormsor when unused for longperiods oftime.
12. Refer all servicing toqualified service personnel. Servicing is required when the apparatus has been damaged in any way:
such as power supply or cord is damaged; liquidhas been spilledor objects havefallen into the apparatus; the apparatus
has been exposed to rain or moisture, does not operate normatly_or has been dropped.
Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates_uses, and can radiate radio frequency energy an& if not installed
and used in accordance with the instructions_may cause harmful interference toradio communications. However,
there is no guarantee that interference wilt not occur in a particular installation, if this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more ofthe following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
Changesor modificationsnot expresslyapprovedby BoseCorporationcouldvoidtheuser'sauthoritytooperate
thisequipment.
Thisdevicecomplieswith part15of theFCCRulesand IndustryCanadalicense-exemptRSS standard(s).
Operationissubjecttothefollowingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation.
ThisClass Bdigitalapparatuscomplieswith CanadianICES-003.
CANICES-3(B)/NMB-3(a)
Thisdevicecomplieswith FCCand IndustryCanada RFradiationexposurelimitsset forthforgeneralpopulation.
It mustnotbeco-locatedor beoperatinginconjunctionwith anyotherantennasor transmitters.
Thetemperaturerangeofthis productis 32°F(0°C)to 113°F(45°C).
This symbolmeansthe productmustnotbediscardedas householdwaste,andshould
bedeliveredto anappropriatecollectionfacilityfor recycling.Properdisposaland
recyclinghelps protectnaturalresources,humanhealthandtheenvironment.For more
informationondisposalandrecyclingof thisproduct,contactyourlocalmunicipality,
disposalservice,or theshopwhereyou boughtthisproduct.
English -3

Important Safety Information
Names and Contents of To×it or Hazardous Substances orElements
Toxic or Hazardous Substances and Elements
Lead Mercury Cadmium Ne×avMent
PartNarne (Pb} (!-Ig} (Cd} (CR(Vl})
PCBs X 0 0 0
Metalparts X O O O
Plasticparts O O O O
Speakers X O O O
Cables X O O O
Polybrominated
Biphenyi (PBB}
O
O
O
O
O
Polybrominated
diphenyLether (PBDE)
O
O
O
O
O
O:Indicatesthatthistoxic or hazardoussubstancecontainedin allof the homogeneousmaterialsfor thispart isbelow the limit
requirementin SJ/T 11363-2006.
X: Indicatesthatthis toxicor hazardoussubstancecontainedin atleast oneofthe homogeneousmaterialsusedforthis partis
abovethelimit requirementin SJ/T11363-2006,
Please complete and retain for your records:
Serial numbers can be found on the Acoustimass ®module's connector panel and on the
packaging for the remote control.
Module serial number:
Remote serial number:
Console serial number:
Soundbar serial number:
Purchase date:
We suggest you keep your receipt with this owner's guide.
Blu-rayDiscT',and Blu-ray" are trademarksof the Blu-rayDiscAssociation.
Theterms HDMIand HDMIHigh-DefinitionMultimediaInterface,andtheHDMILogoaretrademarksor registered
trademarksofHDMILicensingLLCin the UnitedStatesandothercountries."
m DOLBY Manufacturedunderlicensefrom DolbyLaboratories.Dolbyand thedouble-Dsymbolare
..................................._1 trademarksof DolbyLaboratories.
For DTSpatents,seehttp://patents.dts.com.ManufacturedunderlicensefromDTSLicensing
Limited.DTS,theSymbol,&DTSandtheSymboltogetherare registeredtrademarks,and DTS
D_gital Surround DigitalSurroundisa trademarkof DTS,Inc.@DTS,Inc.All RightsReserved.
SoundTouchandthewirelessnotedesign aretrademarksof BoseCorporationin the U.S.andothercountries.
Wi-Fiis a registeredmarkoftheWi-FiAlliance.
@2014BoseCorporation.Nopartofthisworkmaybereproduced,modified,distributed,or otherwiseusedwithout
priorwritten permission.
4-English

Contents
introduction
About your CineMate®130 home theater system ........................................................... 7
System Features ........................................................................................................... 7
Introdudng SoundTouch" from Bose ® .................................................................... 7
Unpacking the system ......................................................................................................... 8
Placement guidelines .......................................................................................................... 9
Setting Up the Acoustimass ®Module
Attaching the rubber feet to the Acoustimass module ................................................ 10
Connecting the Acoustimass module to power ............................................................. 11
Setting Up the Console
Connectin 8 the console to your TV's HDMI TM ARC connector ........................................ 12
TVs without an HDMI TM ARC connector ............................................................................. 13
Use a secondary connection in the followin 8 confisurations .............................. 13
Connectin 8 the console to other sources ........................................................................ 13
Connectin 8 to non-HDMF" compatible sources ............................................................. 14
Audio-only sources ...................................................................................................... 14
Setting Up the Soundbar
Connecting the soundbar ................................................................................................... ]5
Attaching the optional extension feet to the soundbar ............................................... ]6
Wall mounting the soundbar ............................................................................................. ]6
Connecting the System to Power
Connecting the soundbar to power .................................................................................. ]7
Connecting the console to power ...................................................................................... ]7
Starting Up the System
Installing the remote control's batteries ......................................................................... ]8
Powering on the system ...................................................................................................... ]8
English -5

Contents
Finishing Setup
Checking for sound ............................................................................................................... ]9
Changing the language on the console ............................................................................ ]9
Running the ADAPTiQ® audio calibration ......................................................................... 20
Using the System
Remote control buttons ...................................................................................................... 21
Programming the universal remote control ................................................................... 22
Consumer Electronics Control ................................................................................... 22
Test your HDM I'"-connected sources for CEC.......................................................... 23
Program the remote to control your source ............................................................ 24
Source selection ................................................................................................................... 25
Select a source connected to the Bose ®system .................................................... 25
Select a source connected to your TV ...................................................................... 25
Universal source buttons and console connectors ........................................................ 25
Adjusting the volume .......................................................................................................... 26
Function buttons .................................................................................................................. 26
Programming a non-Bose remote control ....................................................................... 26
Getting System Information from the Display
Understanding messages on the display ........................................................................ 27
Using the System menu .............................................................................................. 27
Error messages ............................................................................................................. 29
Acoustimass module status indicator ............................................................................. 29
Care and Maintenance
Troubleshooting ................................................................................................................... 30
If your console cannot find the Acoustimass ® module ......................................... 31
Factory reset the system ............................................................................................ 32
Reset a source button on the remote control ......................................................... 32
Service connectors on the Acoustimass ®module ................................................. 32
Cleaning .................................................................................................................................. 33
Customer service .................................................................................................................. 32
Limited warranty .................................................................................................................. 33
Technical information .......................................................................................................... 33
6-English

Introduction
About youF CineMate }3O
home theateF system
The CineMate 130 system delivers spacious, detailed sound from one
slim soundbar.
System Features
• Advanced Bose audio processing provides natural and lifelike sound.
ADAPTiQ ®audio calibration optimizes sound quality.
Display provides access to system settings and information.
HDMITM connectivity allows easy setup and ensures high-quality audio from your
connected sources.
Supports Consumer Electronics Control (CEC).
Programmable universal remote can control your TV, cable/satellite box and
other connected sources.
Hideaway wireless Acoustimass ®module provides impactful bass sound.
Soundbar can be mounted on the wall (kit available separately).
Supports the SoundTouch TM wireless adapter (available separately).
Introducing SoundTouch TM from Bose ®
With the SoundTouch TM wireless adapter (available separately), you can stream
Internet radio, music services (where available) and your music library. If you have
Wi-FPat home, you're ready to enjoy your favorite music in any room you want.
Key Benefits
Enjoy wireless access to Internet radio, music services and your music library.
Stream your favorite music easily with personalized Presets.
Works with your existing Wi-FPnetwork.
Free SoundTouch TM app for your computer, smartphone or tablet provides more
powerful control.
Simply add additional systems at any time for a multi-room listening experience.
Wide selection of Bose audio systems lets you choose the right solution for
any room.
English -7

Introduction
Unpacking the system
Carefully unpack the carton and confirm that the following parts are included:
Acoustimass C")module Console
Acoustimass Console Soundbar HDMI'' cable
power cord power cord power cord
Soundbar /
Speaker cable
Universal remote control ADAPTiQ ® headset Rubber feet
The appropriate cords for region are supplied.
power your
Note: If part of the system is damaged, do not use it. Contact your authorized
Bose _>dealer or Bose customer service. Refer to the contact sheet in
the carton.
8-English

Introduction
P acement uide ines
To avoid wireless interference, keep other wireless equipment away from the
system. Place the system outside of and away from metal cabinets, away from
other audio/video components and away from direct heat sources.
Acoustimass _ • Stand the Acoustimass module on its rubber feet along the same wall
module as your TV, or along any other wall in the front third of the room.
• Choose a stable and level surface. Vibration can cause the
Acoustimass module to move, particularly on smooth surfaces like
marble, glass or highly polished wood.
• Make sure there is an AC (mains) outlet nearby.
Soundbar • Place the soundbar in front of your TV.
• Do not place the soundbar inside a cabinet.
Make sure there is an AC (mains) outlet nearby.
Console • Place the console near your TV. Do NOT place the TV on top of
your console.
Make sure there is an AC (mains) outlet nearby.
SoundTouch TM • Place the SoundTouch TM wireless adapter within 1-6 ft. (.3-1.8 m) of
wireless the console.
adapter
(available • If you have the SoundTouch TM wireless adapter, you can begin set up.
separately) Refer to the SoundTouch TM wireless adapter's owner's guide for
more information.
Note: Do not connect the adapter to the console until prompted by the
SoundTouch TM app.
Sample system placement
English -9

Settin 8 Up the Acoustimass ® Module
Attachin 8 the Fubbe_ feet to the
Acoustimass module
Attach the rubber feet to the Acoustimass module to protect your floor.
1. Turn the Acoustimass module upside down onto a soft surface to protect it
from being damaged.
2. Attach the rubber feet to the bottom of the Acoustimass module.
@-- Rubber foot
@
@
Bottom of Acoustimass module
3_
4_
Place the Acoustimass module on its feet.
Caution: Do not place the Acoustimass module on its front, back end, side or
top when in use.
.....@@
Remove all protective films. These may affect acoustic performance if left
in place.
10 -English

Setting Up the Acoustimass ®Module
CoHHectiH_ the Acoustimass module
te pewe_
1. Plug the power cord into the Power connector on the Acoustimass module.
2. Plug the power cord into an AC (mains) outlet.
English -11

Settin 8 Up the Console
Connecting the console to your TV°s
HD_4__°_ARC CoHHecto_
Use the Bose ® HDMI cable to connect the console to your -IV.
1, Disconnect your HDMI-connected sources, such as a cable/satellite box, DVD
or Blu-ray DiscTM player or game system, from your -IV.
2, Insert one end of the Bose ®HDMI cable into the TV connector on the console.
3_ Insert the other end of the HDMI cable into your TV's HDMI connector.
Note: Use your TV's HDMI connector labeled ARC or Audio Return Channel
if available. If your -I__does not have an HDMI ARC connector,
see page 13.
12 -English

Setting Up the Console
TVs without an HDM_ _°_ARC connector
If your TV does not have an HDMI ARC connector, you may need to make a
secondary connection to the console with an optical, coaxial or analog stereo
audio cable. Without this secondary connection, you may not hear audio from the
Bose ®system.
Use asecondary connection in the following configurations
• You are using internal sources (such as Internet applications or an
over-the-air antenna).
You are connecting sources to your -IV.
Refer to your -IV owner's guide for more information.
Tip: If your TV has IN and OUT audio connector panels, use audio OUT for your
secondary connection.
Connectin 8 the console to other sources
You can connect the console to other sources, such as a cable/satellite box, DVD
or Blu-ray DiscTM player or game system with an HDMI cable (available separately).
If your source is non-HDMI compatible, use different audio and video cables
(see page 14).
1. insert one end of an HDMI cable into your source's HDMI (OUT) connector.
2. insert the other end of an HDMI cable into the appropriate HDMI connector on
the console. For example, to connect a game system, connect an HDMI cable
to the GAME connector. Connect other sources to the
appropriate HDMIconnector
on the console.
English -13

Setting Up the Console
CoH_ectiHg to no_-HDMI _=
compatible sources
Ifyour source is non-HDMI compatible, connect it to your -15/using audio and video
cables (available separately). Refer to your TV owner's guide for more information.
Tip: If your source has IN and OUT audio connector panels, use audio OUT.
Audio-only sources
Ifyour audio-only source, such as a media or CD player, is non-HDMI compatible,
connect it to the console's optical, coaxial or analog connector. You can use an
optical, coaxial or analog cable (available separately).
Note: After connecting your audio-only source, you must set the optical, coaxial or
analog input for the appropriate source. You can access these settings using
the System menu (see page 27).
14 -English

Setting Up the Soundbar
CeHHectiH_ the seuHdbar
1. Insert one end of the speaker cable into the Speaker Connection connector
on the console.
2, Insert the other end of the speaker cable into the Aud_iN connector on
the soundbar.
English -15

Setting Up the Soundbar
AttachiH_ the optioHal extensioH feet
te the seundba_
Attach the optional extension feet to raise the soundbar to create
space underneath.
1. Turn the soundbar upside down onto a soft surface to protect it from being
damaged.
2. Attach the extension feet to the bottom of the soundbar.
3. Place the soundbar on its feet.
Wall mountin S the soundbaF
You can mount the soundbar on a wall. To purchase the WB-135 Wall Mount Kit,
contact your local Bose dealer or visit www.Bose.com
CAUTION: Do not use any other hardware to mount the soundbar.
16 -English

Connectin 8 the System to Power
CoHHectiH_ the seuHdba_ to powe_
1. Plug the power cord into the Power connector on the soundbar.
2. Plug the power cord into an AC (mains) outlet.
CoHHectiHg the coHsole to powe_
1. Plug the power cord into the Power _ connector on the console.
2. Plug the power cord into an AC (mains) outlet.
English -17

Starting Up the System
IHstalIiH S the remote coHtFoI's batteries
1, Slide open the battery compartment cover on the back of the remote control.
2. Insert the two provided AA (IEC-LR6) 1.5V batteries. Match the + and -
symbols on the batteries with the + and - markings inside the compartment.
3. Slide the battery compartment cover back into place.
PoweriH S oH the system
Press on the remote.
The console powers on.
The display defaults to CBL SAT for first time power on. Otherwise, the display
defaults to your last used source.
/
Note: The system powers off after sixteen minutes of inactivity. You can disable
AUTO OFF using the System menu (see page 27).
18 -English

Checkin_ fo_ sound
1,
2,
3_
4,
5,
6_
Finishing Setup
Power on your T'v(
If you are using a cable/satellite box or other secondary source, power on
this source.
Tip: If your secondary source is connected to your TV, select the appropriate
TV input. You may need to use a different remote.
Power on the system.
Press the appropriate source button.
Check if sound is coming from the soundbar.
Note: If you do not hear sound from the soundbar, see "Troubleshooting" on
page 30.
Press _, on the remote control. Check that no sound is coming from the TV
speakers.
Note: If you hear sound coming from your TV speakers, see "Troubleshooting"
on page 30.
CHaHsiH 8 the laHsuase oH the coHsole
Use the remote control to change the language on the console.
1.
2.
3.
Power on the system.
Press on the remote control.
Press V until 10 LANGUAGE (€,_ appears on the display.
4. Press 4 and _ to select your language.
5. Press _.
z•
Tip: Look for the ({_ icon in the System menu if you select the wrong
language.
English -19

Finishing Setup
Runnin 8 the ADAPTi©< S'audio calibration
The ADAPTiQ audio calibration customizes the sound of the system to the
acoustics of your listening area by taking five audio measurements. To perform
an audio calibration, you need 10 minutes when the room is quiet.
1. Put the ADAPTiQ headset on your head.
During the ADAPTiQ audio calibration, a microphone on the top of the
headset measures the sound characteristics of your room to determine
optimal sound quality.
2.
3.
4.
5.
6.
7.
¢h
Insert the ADAPTiQ headset cable into the _ connector on the console.
Press on the remote control.
Press V until 14 ADAPTiQ appears on the display.
Follow the voice prompts until the system completes the process.
Unplug the ADAPTiQ headset from the console and store it in a safe place.
Note: If you move the system or any furniture, run ADAPTiQ again to ensure
optimal sound quality.
20 - English