Bose Wave radio Series III User manual

Enabling standby (low power) mode
Applies to:
SoundTouch 30 wireless speaker
SoundTouch 20 wireless speaker
You can enable standby (low power) mode by removing the Ethernet cable,
disabling Wi-Fi and clearing the Bluetooth® pairing list. Disabling Ethernet and Wi-
Fi will prevent the system from connecting to your network, as well as preventing
the system from being controlled by the SoundTouch® app until Ethernet and Wi-
Fi are re-enabled.
Disable Wi-Fi: On the speaker, press and hold "3" and Volume down until the Wi-
Fi indicator turns off
Deactivate Bluetooth:Deactivate Bluetooth by clearing the pairing list. Press and
hold the Bluetooth button on the speaker until the Bluetooth indicator blinks
white

Within 2.5 hours, the unit will enter standby mode
To reactivate Wi-Fi, press and hold "3" and Volume down until the Wi-Fi indicator
turns on. Reactivate Bluetooth by pairing with a Bluetooth source