Boston Acoustics Neo Type-M SE User manual

Neo Type-M SE Imaging System
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 USA T: 978.538.5000 F: 978.538.5100 W: bostonacoustics.com/car
Boston, Boston Acoustics, and the Boston Acoustics logo are registered trademarks of Boston Acoustics, Inc.
Specifications are subject to change without notice.
©2008 Boston Acoustics, Inc. All rights reserved. Covered by patents issued and/or pending. 142-002098-2
Specifications Neo Type-M SE
Nominal Size 1"
RMS Power Handling 50 watts
Peak Power Handling 100 watts
Nominal Impedance 8 ohms
Frequency Response (SQ mode) 8kHz–22kHz (± 3dB)
Frequency Response (SPL mode) 3kHz–22kHz (± 3dB)
Sensitivity 90dB (1watt @ 1meter)
# Description Quantity
1 Type-M1 1" Allow Dome Tweeter 2
2 Neo Type-M Crossover 2
3 Tweeter Grille 2
4 Tweeter Flush-Mount 2
5 Tweeter Angle-Mount (top) 2
6Tweeter Angle-Mount (bottom) 2
not shown Tweeter Hardware Pack 2
7 Spring Clips 4
8 Terminated Tweeter Wire 2
9#8 x 3/8"Pan Head Screw 2
10 #8 x 1/2"Self-Tapping Screw 4
11 #8x1" Self-Tapping Screw 8
12 1 1/2"Hex Nut 2
13 Hex Key 1
1
5
/ 8 "
40mm
6
1
/ 2 "
165mm
3
11
/ 16 "
94mm
1
1
/ 2 "
38mm
2"
51mm
1
3
/ 4 "
45mm
3
/ 4 "
19mm
1
1
/ 8 "
27mm
2
1
/ 16 "
52mm
1
1
/ 2 "
38mm
2"
51mm
1
3
/ 4 "
45mm
3
/ 4 "
19mm
1
1
/ 8 "
27mm

Key on Back Page
B C D E
Angle-Mount
8
9
5
10
6
1
3
8
7
4
9
1
3
Flush-Mount Tweeter Attenuation - J1 Crossover Configuration - J2
Tweeter Installation
A
Connecting / Securing Crossover Cases
2
Application - Dash Mount Application - Door Mount Wiring - Parallel With Front SpeakersWiring - Separate Amplification
Line Up Crossovers Slide Together A “Click” indicates that
the crossovers are locked Secure with Hardware Wiring
11
SQ (Imaging Mode)
SPL
Separate
or
Coaxial
Speakers
12
13
3kHz 8kHz
Imaging - 8kHz and above
SPL - 3kHz and above