Boult Audio KW107S User manual

User Manual
KW107S smart watch
Please refer to this manual before using the product.
V0.0.1

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
KW107S
KW107S_PHONE
KW107S_PHONE
KW107S

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
Exercise: Record daily steps, distance, and
calories. More details can be viewed in app.
Sleep: Record your sleep status.More details
can be viewed in APP.
Phone Calling: Please refer to 02.3 to connect
and use phone calling feature. You can check
contacts and calls record.
Heart rate monitoring: Click on heart rate page
to measure heart rate. More APP monitor
operation and test data can be viewed on in
app.
Blood pressure monitor:
Record your blood pressure status. More
details can be viewed in APP.
The value is for reference only and cannot be
used as a medical basis.
04 Function introduction

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
Multi-sport mode:are supported.
More details can be viewed in APP.
Weather: Current weather status and next 5
days forecast.
Make sure bluetooth connected correctly.
Message: Instant notifications reminder, 5
latest messages will be showed.(requires
permission to turn on the App side)showed.
AI voice assistant: When APP is successfully
connected and the bluetooth call function is
successfully connected. By using the
corresponding phone model’s wake up
"word" to wake-up AI voice assistant (for
example, the wake-up word of Xiaomi phone
is "Xiao Ai"), the user can use the AI voice
assistant to wake up the phone function to
operate it.
Blood oxygen monitor:
Record your blood oxygen status. More
details can be viewed in APP.
The value is for reference only and cannot be
used as a medical basis.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
BT Camera Control: After connecting to the
phone, the watch can be used as a remote
control for the phone's camera, and click on the
watch camera control page to control the
phone camera shutter.
Stopwatch: Record time.
Breathing training: Record
breath training.
Alarm clock: 3 alarm clocks
can be set.
Music control:Connected to
APP, operate on
play/pause/previous/next and
volume on the phone.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
Flashlight: Light up the screen to illuminate.
Find：Find the phone to confirm whether the
connection with the watch is successful.
Games: 2048 /Thunder Battleship / Young
Bird.
Brightness adjustment: Brightness or
darkness can be adjusted
Auto sleep: The screen-on time of 5/10/15/20s
can be set.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
Dial switch: Long pressing the main page, you
can slide left and right to select and set the
dials.
Menu view: The style of the main menu can be
switched , and it can be switched to grid view
or list view.
Do not disturb: After turn on , the watch will no
longer receive message reminders.
Power saving mode: When turned on it, the
brightness drops to the lowest level, and the
incoming message does not vibrate to remind,
and turm o wrist lift to brighten the screen.
Restart: Restart the watch in settings.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.
Power on/off: Press and hold the side
button for 3 seconds on the dial page.
Reset: restore factory settings, reset watch
data to zero.
Version: Displays the bluetooth name and
version number.
APP download: Scan the QR code to download
the APP.

Notes:
1.1The company reserves the right to modify the contents of this manual without
any further notification. It is normal that some functions may vary in certain
versions of software.
1.2 Please charge this product with the configured cable for no less than 2 hours
before using it.
1.3 Before using the product, you need to connect the APP synchronization time
and set your personal information.
1.4 This product supports IP68 rank waterproof, not suitable for deep sea diving.
Hot water, tea and other corrosive liquids are destructive to the watch, and will
not be able to enjoy the product warranty and free maintenance services.
01 How to wear
Please wear the device on your wrist correctly, about one finger from the carpal
and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when heart rate monitor.
02 How to download & connect to APP
02.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open
“Settings--About--Download QR code” , scan QR code to download and install “
DaFit” APP
B. Scan below “DaFit” QR code to download and install “ DaFit” APP
C. Search “Dafit” in App Store or Play Store to download and install “ DaFit” APP
02.2. Open “DaFit” and select "Add Device" on the device page, then follow the
instructions on the screen.
02.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly, there will
be a “ PAIR” pop-up reminder, chose to pair to KW107S_PHONE, then
connection finished.
(2) For all IOS mobile phones and some Android mobile phones, after watch
connected to APP correctly, you should go to setting page of mobile phones,
search and select KW107S_PHONE in bluetooth list, then click to pair, BT call
feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0 or
above.
(3). For the first time connection with iphone, “Pair” reminder will pop-up, click to
pair, then incoming calls and instant messages will be pushed.
(4). For the first time connection with android, “Permissions” reminder will
pop-up, please follow up the guidance and allow permissions to ensure all
functions working properly.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
network.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch to try again.
03 Operating Instructions
a. Shortcut page: Slide down from main page, go to shortcut page.
b. Main Menu Page: Slide up from the main page, change the menu styles by
double click on side button or change on setting page.
c.Split- screen browser: Slide right from the main page to enter into split-screen,
press the side button or slide left to return
d.Smart components page: Slide right from the main page enter into smart
components page, there are 7 components, click “+” to add components, long
press to delete.
e. Quick access to change watch faces: Long press the watch face on main
page, slide left or right to choose watch faces.
f. Power on/off: press and hold the side button for 3 seconds on the dial
interface
g. Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
05 Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
brighten the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
06 Charging
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time,
please clean up the charging metal pins to make sure connecting well.
07 Warranty
1. One year warranty for default hardware defectives, half of year for battery and
charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
(1) Personal assemble or disassemble.
(2) Falling damage during use.
(3) All man-made damage or due to the third party's fault, improper use(such as:
water in the smart watch, external force shattering, scratch during use etc.
3. Please provide a warranty card with the details filled when request for after
selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes:
1.To ensure waterproof, please DO NOT:
1)Wear the watch during hot shower or in hot tea and other corrosive liquids
2)Remove any screws or buttons.
2.Products with batteries cannot be disposed with
household waste. Please send this product to WEEE
collecting points near you.

Warranty Certificate
Client Name
Vendor’s Contact
Product IMEI Code
Client’s Address
Vendor’s Address
Client Info
Vendor
Contact Info
Purchase Date
Product Type (Stamp)
Warranty Record
Date Problems Diagnosis More Info