Boult Audio Dive+ User manual

Smartwatch
Dive+
User Manual
For better experience, suggest use IOS 9
Android 5 or above operating system.

functions may vary in certain versions of software.
(B) 1.2 Please charge this product with the congured cable for no less
(A) 1.1The company reserves the right to modify the contents of this
deep sea diving. Hot water, tea and other corrosive liquids are
than 2 hours before using it.
synchronization time and set your personal information.
destructive to the watch, and will not be able to enjoy the product
warranty and free maintenance services.
(D) 1.4 This product supports IP68 rank waterproof, not suitable for
manual without any further notication. It is normal that some
(C) 1.3 Before using the product, you need to connect the APP
Please wear the device on your wrist correctly, about one nger from the
carpal and adjust it to comfortable position. Below picture as reference.
Tip: Please wear the device a bit little tighter when using heart rate
monitor.
02 How to download & connect to APP
2.1
3 methods to download & install APP:
A. Find the QR code on setting page. Turn on the watch, open “Settings-
-About--Download QR code” , scan QR code to download and install
“Boultt” APP.
B. Scan below “BoultFit” QR code to download and install “BoultFit” APP
C. Search “BoultFit” in App Store or Play Store to download and install
“BoultFit” APP.
2.2. Open “BoultFit” and select "Add Device" on the device page, then
follow the instructions on the screen.
Notes:
01 How to wear

2.3 How to connect to BT call feature:
(1)For most android phones, after watch connected to APP correctly,
there will be a “ PAIR” pop-up reminder, chose to pair to Dive+_PHONE,
then connection nished.
(2)For all IOS mobile phones and some Android mobile phones, after
watch connected to APP correctly, you should go to setting page of
mobile phones, search and select Dive+_PHONE in bluetooth list, then
click to pair, BT call feature can be used after paired.
Tips:
(1).Please upgrade the app to latest version to get a better experience.
(3). For the rst time connection with iphone, “Pair” reminder will pop-
up, click to pair, then incoming calls and instant messages will be
pushed.
(5). To connect successfully, please turn on mobile phone’s bluetooth, GPS and
Mobile network/WIFI.
(6). If the device cannot be searched or connected during use, please reset or
turn off the watch try again.
(2). It is recommended mobile phone system of Android 5.0 or IOS 9.0
or above.
(4). For the rst time connection with android, “Permissions” reminder
will pop-up, please follow up the guidance and allow permissions to
ensure all functions working properly.
Dive+
Dive+
Dive+_Phone
DIVE+

(A). Quick Settings: Slide down from main page, go to shortcut page.
03 Operating Instructions
(B). Main Menu Page: Slide up from the main page, change the menu
styles by double click on side button or change on setting page.
(C). Recent Features: Slide right from the main page to enter into split-
screen, press the side button or slide left to return.
(D). Smart Features page: Slide right from the main page enter into
smart components page, there are 7 components, click “+” to add
Features long press to delete.

(E). Quick access to change watch faces: Long press the watch face on
main page, slide left or right to choose watch faces.
(F). Power on/off: press and hold the side button for 3 seconds on the
dial interface.
(G). Normal operation, press the side button to return back to previous page; On
main page, press the side button to turn on/off the screen.
04 Function introduction
Exercise: Record daily steps, distance, and
calories. More details can be viewed in app.
Phone Calling: Please refer to 02.3 to connect
and use phone calling feature. You can check
contacts and calls record.

Sleep: Record your sleep status. More details
can be viewed in APP.
Heart rate monitoring: Click on heart rate
page to measure heart rate. More APP
monitor operation and test data can be
viewed on in app
Weather: Current weather status and next 5
days forecast.
Make sure bluetooth connected correctly.
Multi-sport mode: are supported.
More details can be viewed in APP.
Blood pressure monitor:
Record your blood pressure status. More
details can be viewed in APP.
The value is for reference only and cannot be
used as a medical basis.
Blood oxygen monitor:
Record your blood oxygen status. More details
can be viewed in APP.
The value is for reference only and cannot be
used as a medical basis.

Message: Instant notications reminder, 5
latest messages will be showed.(requires
permission to turn on the App side)showed.
BT Camera Control: After connecting to the
phone, the watch can be used as a remote
control for the phone's camera, and click on the
watch camera control page to control the
phone camera shutter.
Stopwatch: Record time.
Alarm clock: 3 alarm clocks
can be set.
Breathing training: Record
breath training.
AI voice assistant: When APP is successfully
connected and the bluetooth call function is
successfully connected. By using the corresponding
phone model’s wake up "word" to wake-up AI voice
assistant (for example, the wake-up word of Xiaomi
phone is "Xiao Ai"), the user can use the AI voice
assistant to wake up the phone function to operate it.

Flashlight: Light up the screen
to illuminate.
Music control:Connected to
APP, operate on
play/pause/previous/next and
volume on the phone.
Find Phone：Find the phone to confirm whether
the connection with the watch is successful.
Auto sleep: The screen-on time of 5/10/15/20s
can be set.
Brightness adjustment: Brightness or darkness
can be adjusted.
Games: 2048 /Thunder Battleship / Young
Bird.

Power saving mode: When turned on it, the
brightness drops to the lowest level, and the
incoming message does not vibrate to remind,
and turm o wrist lift to brighten the screen.
Do not disturb: After turn on , the watch will no
longer receive message.
Menu view: The style of the main menu can be
switched , and it can be switched to grid view
or list view.
Dial switch: Long pressing the main page, you
can slide left and right to select and set the
dials.
Version: Displays the bluetooth name and
version number.
Power off, Restart, Reset: Press and hold the
side button for 3 seconds on the dial page

Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, turning the wrist to
wake the screen, drinking water reminder, heart rate warning reminder,
physiological cycle reminder , Goal achievement reminder.
APP download: Scan the QR code to download
the APP.
05 Other functions
Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long
time, please clean up the charging metal pins to make sure connecting well.
Attach the charging cable to the watch charging port, ensuring the metal pins
fully connected.
06 Charging

07 Warranty
5. Please note all functions of the product are based on physical objects.
(2)Remove any screws or buttons.
1.To ensure waterproof, please DO NOT:
(1)Wear the watch during hot shower or in hot tea and other corrosive liquids
4. Please contact with direct dealers for warranty service.
Notes:
(2) Falling damage during use.
3. Please provide a warranty c2.Products with batteries cannot be disposed
with ard with the details lled when request for after selling service.
(1) Personal assemble or disassemble.
(3) All man-made damage or due to the third party's fault, improper use(such
as: water in the smart watch, external force shattering, scratch during use etc.
2. Below reasons cause to defectives are not included in free warranty service:
1. One year warranty for default hardware defectives, charging cable.
2.Products with batteries cannot be disposed with household waste. Please
send this product to WEEE collecting points near you.