Boyo VTC701AHD-Q2 User manual

VTC701AHD-Q2
VTC701AHD-Q4
7” 1080P Full HD Digital
Wireless 2/4 Channel Monitor and Camera System
with Digital Video Recorder
USER MANUAL
Please read the instructional complete before use and keep it for
future reference.

2
Product Features
•1080P Full HD Image Quality System
•7” All View Angle IPS TFT LCD Panel
•4 Channel Wireless Monitor with Single, Dual, or Quad View
•Waterproofed, Heavy Duty Wireless Camera
•Reliable Wireless Operational Range up to 300 ft
•Audio Monitoring with a Microphone Built into the Camera
•Built-in DVR for Audio/Video Recording up to 4 Channels
•Camera with Heater Function
•Easy Installation and Operation
Contents
Monitor Set
(1x)
Camera Set
(2x for Q2)
(4x for Q4)
12V Power Adapter
Power Chords
(3x for Q2)
(4x for Q4)
Mounting HW
Before Installation
•Please check contents.
•Perform bench test. Ensure the product is working before
installation by connecting the monitor and the camera to 12VDC.
•Perform pre-install test, before mounting the monitor and the
camera. In very rare instances, a running engine causes
interference, resulting in image freezing and jerky object
movements. In such situation, the monitor and the camera need
to be moved and positioned at various places to determine the
best performance position.
•For recording, please use the high speed C10 SD memory card.

3
Wiring
a. Monitor wiring:
Trigger: The reverse backup light or turn signals are used for
trigger input. For example: pair a camera to Ch 3 to a backup
camera facing backup of the vehicle and connect reverse
backup light positive to the blue (Ch 3) wire. Whenever, a
gear is put in reverse and the backup light is turned on, it will
trigger the monitor to display the backup camera.
b. Camera wiring:
Pairing Button
12VDC –ACC

4
Monitor Installation
a. Install the monitor
bracket using the 3 self-
tapping screws.
•Screw in the center.
•Adjust the angle.
•Tighten all screws.
b. Install the monitor using 2
bolts on each sided.
* Do not tighten bolts.
c. Adjust the monitor angle.
* Tighten all bolts.
Operation
The wireless camera system is operated using the buttons on the
front face of the monitor. These are 7 buttons.
Each button has different function in three different modes. Three
different modes are Split Screen Multi- Channel Display Mode,
Single Channel Screen Display and Menu Display Mode.

5
1. Monitor Button Functions
Split Screen Multi-Channel Display Mode
Button
Function
MENU
-
Audio Channel -
Audio Channel +
Display On / Off
MODE
Video Ch +
-
OK
-
Single Channel Screen Display Mode
Button
Function
MENU
Enter Menu
Brightness -
Brightness +
Display On / Off
MODE
Video Channel +
Scale line on/off
OK
-
Menu Mode
Button
Function
MENU
Exit Menu Level
Previous Menu Item
Decrease
Next Menu Item
Increase
Display On / Off
MODE
-
-
OK
Select Submenu
Confirm

6
2. Menu Button –Single Channel Screen Display Mode
Pairing:
By pairing assign a camera to each channel
Picture Setting:
Brightness, Contrast, Saturation, Audio Volume
Picture Orientation:
Flip L/R, Flip U/D
Screen Display Settings:
Dual, or Quad split screen on/off
Camera Settings:
Camera on/off, Display Scan time
System Settings:
Set date/time, Set trigger delay, Set parking
guidelines
Playback:
Play back recorded video
Record Settings:
Format SD, Rewrite on/off

7
3. Pairing:
For a wireless camera to transmit video to a monitor, each camera
must be paired with specific monitor channel (or screen division).
In the following example, Ch 1 has been selected (Ch 1 single
screen display mode).
Menu button is pressed.
‘Pairing’ is selected and the monitor starts count-down
immediately.
During the count-down, press the camera’s RED pairing button on
the camera.
When pairing is successful, the camera video will be displayed.
Pairing Button
12VDC –ACC

8
4. Picture Settings:
Decrease
Increase
Brightness
Contrast
Hue
Volume

9
5. Picture Orientation:
Normal Camera pointing forward:
An object at the front-right side of the vehicle
is displayed on the right side of the screen.
Normal Camera pointing backward - installed
as a rearview camera: Flip image horizontally.
An object at the rear- right side of the vehicle is
displayed on the right side of the screen.
Normal Camera installed upside down:
Rotate the image (180 degrees) to get the
normal view.
Rear view camera installed upside down:
Flip horizontally and rotate the image (180
degrees) to get the normal view.

10
6. Screen Display Setting:
The screen divisions, applicable to enabled cameras in “Camera
Settings” are enabled (white colored) and non-applicable screen
divisions are disabled (grayed out).
Use or button to the enabled screen division, and then
use the OK button to select. Selected screen divisions will pink
background .
VTC701AHD-Q2: There are only two cameras and if they are
paired with Ch 1 and Ch 2, then only will be enabled for
selection. Other 2-screen divisions ( , and ) will be
disabled (greyed-out).
VTC701AHD-Q4: If Camera 2 is turned off in the camera setting
menu ( ), the screen divisions, ( , ) will be disabled from
selection and grayed out.
When ‘Split Off’ ( ) is selected, the split screen display will not
be displayed.