Braun 7 series User manual

Type 5694
Type 5695
braun-market.com.ua
Series 7
730s-4
720s-4
trimmer
trimmer
trimmer
Series 7Series 7
Series 7
94501402_730s-4_CEE_S1.indd 194501402_730s-4_CEE_S1.indd 1 08.08.12 15:3608.08.12 15:36
Stapled booklet, 110 x 200 mm, 70 p (incl. 6 p cover), 2/2c = black + HKS43N

Braun Infolines
UK 0800 783 7010
IE 1 800 509 448
FR 0 800 944 802
BE 0 800 14 592
PL 801 127 286
801 1 BRAUN
CZ 221 804 335
SK 02/5710 1135
HU (06-1) 451-1256
HR 091 66 01 777
SI 080 2822
TR 0 800 261 63 65
RU 8 800 200 20 20
UA 0 800 505 00
HK 852-25249377
(Audio Supplies Company Ltd.)
English 4
Français 9
Polski 14
âesk˘ 20
Slovensk˘ 25
Magyar 30
Hrvatski 35
Slovenski 41
Türkçe 46
êÛÒÒÍËÈ 51
ìÍ‡ªÌҸ͇ 57
69
Braun GmbH
Frankfurter Straße 145
61476 Kronberg/Germany
94501402/VIII-12
UK/FR/PL/CZ/SK/HU/HR/SL/TR/
RU/UA/Arab
94501402_730s-4_CEE_S2.indd 194501402_730s-4_CEE_S2.indd 1 08.08.12 15:3808.08.12 15:38

trimmer
trimmer
trimmer
on
off
on
off
trimmer
trimmer
trimmer
Series 7
Series 7
Series 7
2
1
3
4
5
8
7
6
9
10
12
11
trimmer
trimmer
trimmer
Series7 Series7
Series7
94501402_730s-4_CEE_S3.indd 194501402_730s-4_CEE_S3.indd 1 08.08.12 15:4308.08.12 15:43

4
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you enjoy your new Braun Shaver.
Warning
Your shaver is provided with a special cord
set, which has an integrated Safety Extra Low
Voltage power supply. Do not exchange or
tamper with any part of it, otherwise there is risk
of electric shock.
This appliance is not intended for use by children
or persons with reduced physical or mental
capabilities, unless they are supervised by a
person responsible for their safety. In general,
we recommend that you keep the appliance
out of reach of children. Children should be
supervised to ensure that they do not play with
the appliance.
Oil bottle
Keep out of reach of children.
Do not swallow.
Dispose of properly when empty.
Description
1Foil & Cutter cassette
2Cassette release button
3Shaver head «lock» switch
4Pop-out long hair trimmer
5On/off switch
6(–) setting button (sensitive)
7(+) setting button (intensive)
8Reset button
9Shaver display
0Shaver power socket
qTravel case
w Special cord set
Charging
The best environmental temperature for charging
is between 5 °C and 35 °C.
• Using the special cord set w, connect the
shaver to an electrical outlet with the motor
switched off and charge it for at least one hour.
• A full charge provides up to 50 minutes
of cordless shaving time. This may vary
according to your beard growth.
STOP
English
94501402_730s-4_CEE.indd 494501402_730s-4_CEE.indd 4 13.08.12 08:5713.08.12 08:57

5
• If the rechargeable battery has run out of
power (discharged), you may also shave by
connecting the shaver to an electrical outlet via
the special cord set.
Shaver display 9
The green indicator flashes when the shaver is
being charged or when in use.
When the battery is fully charged, the charge
segment « » (720) / « » « » (730) will light
up continuously provided that the shaver is
switched on or connected to an electrical outlet.
Stand-by mode
(shaver is switched off but connected to the
mains)
Some minutes after completing the charging,
the shaver switches to the stand-by-mode:
The display turns off.
The red « » indicator flashes when the battery
capacity has dropped below 20%, provided the
shaver is switched on. The remaining capacity
will then be sufficient for 2 to 3 shaves.
Personalizing your shaver
Personalizing your shaver
With the (–) 6and (+) 7buttons you can choose
the best setting for shaving different areas of
your face and as per your specific needs. The
different settings are indicated by the pilot light
incorporated in the on/off switch 5:
• dark blue (powerful shave)
• light blue (normal)
• white (for a thorough comfortable shave in
sensitive areas of your face such as neck)
For a thorough and fast shave we recommend
the (+) setting.
When switching on next time, the last used
setting will be activated.
730 720
730 720
+normal
94501402_730s-4_CEE.indd 594501402_730s-4_CEE.indd 5 13.08.12 08:5713.08.12 08:57

6
How to use
Press the on/off switch 5to operate the shaver:
• The pivoting shaver head and floating foils
automatically adjust to every contour of your
face.
• To shave hard to reach areas (e.g. under the
nose) slide the shaver head «lock» switch 3to
the back position to lock the pivoting head at
an angle.
• To trim sideburns, moustache or beard, slide
the pop-out long hair trimmer 4upwards.
Tips for the perfect shave
For best shaving results, Braun recommends you
to follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles
(90°) to your skin.
3. Stretch your skin and shave against the
direction of your beard growth.
Cleaning
The shaver head is suitable for cleaning
under running tap water.
Warning: Detach the shaver from the
power supply before cleaning the shaver
head in water.
Regular cleaning ensures better shaving
performance. Rinsing the shaving head under
running water after each shave is an easy and
fast way to keep it clean:
• Switch the shaver on (cordless) and rinse
the shaving head under hot running water.
You may use liquid soap without abrasive
substances. Rinse off all foam and let the
shaver run for a few more seconds.
• Next, switch off the shaver, press the release
button 2to remove the Foil & Cutter cassette
1and let it dry.
• If you regularly clean the shaver under
water, then once a week apply a drop of
light machine oil on top of the Foil & Cutter
cassette.
t
r
lock
12
trimmer
lock
lock
lock
+
release
oil
trimmer
er
re
le
a
s
e
trimmer
re
le
a
s
e
re
le
a
s
e
click!
Series 7
Series 7
Series
Series
94501402_730s-4_CEE.indd 694501402_730s-4_CEE.indd 6 13.08.12 08:5713.08.12 08:57

7
Alternatively, you may clean the shaver using the
brush provided:
• Switch off the shaver. Remove the Foil & Cutter
cassette 1and tap it out on a flat surface.
Using the brush, clean the inner area of the
pivoting head. However, do not clean the foil
and cutter cassette with the brush as this may
damage it.
Keeping your shaver in top shape
Replacing the Foil & Cutter cassette / reset
To maintain 100% shaving performance,
replace the Foil & Cutter cassette 1, when the
replacement symbol lights up on the shaver
display 9(after about 18 months) or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the Foil & Cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
8for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & Cutter cassette 70S
Environmental notice
This product contains rechargeable
batteries. In the interest of protecting the
environment, please do not dispose of the
product in household waste at the end of
its useful life. Disposal can take place at a
Braun Service Centre or at appropriate
collection points provided in your country.
Subject to change without notice.
For electric specifications, see printing on the
special cord set.
re
le
a
s
e
re
le
a
s
e
re
le
a
s
e
Series 7
Series 7
m
er
re le
a
s
e
70S
Series 7
94501402_730s-4_CEE.indd 794501402_730s-4_CEE.indd 7 13.08.12 08:5713.08.12 08:57

8
Guarantee
We grant a 2 year guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate any defects in
the appliance resulting from faults in materials or
workmanship, free of charge either by repairing
or replacing the complete appliance at our
discretion.
This guarantee extends to every country where
this appliance is supplied by Braun or its
appointed distributor.
This guarantee does not cover: damage due to
improper use, normal wear and tear (e.g. shaver
foil or cutter block) as well as defects that have
a negligible effect on the value or operation of
the appliance. The guarantee becomes void if
repairs are undertaken by unauthorised persons
and if original Braun parts are not used.
To obtain service within the guarantee period,
hand in or send the complete appliance with
your sales receipt to an authorised Braun
Customer Service Centre.
For UK only:
This guarantee in no way affects your rights
under statutory law.
94501402_730s-4_CEE.indd 894501402_730s-4_CEE.indd 8 13.08.12 08:5713.08.12 08:57

9
Français
Nos produits sont conçus pour répondre aux
normes les plus élevées en matière de qualité,
fonctionnalité et design. Nous espérons que
vous apprécierez votre nouveau rasoir Braun.
Attention
Votre système de rasage est livré avec
un cordon d’alimentation qui intègre une
prise transformateur basse tension. Vous
ne devez remplacer ou modifier aucun de
ses composants, afin d’éviter tout risque
d’électrocution.
Cet appareil n’est pas destiné à des enfants
ou à des personnes aux capacités mentales,
sensorielles et physiques réduites à moins
qu’elles ne soient sous la surveillance d’un
adulte responsable de leur sécurité. Il convient
de surveiller les enfants pour s’assurer qu’ils ne
jouent pas avec l’appareil. Conserver hors de
portée des enfants.
Bouteille d’huile
Conserver hors de la portée des enfants.
Ne pas avaler.
Eliminer comme il convient après usage.
Description
1Cassette de rasage
2Bouton d’éjection de la cassette
3Verrouillage de la tête du rasoir « lock »
4Tondeuse rétractable pour poils longs
5Interrupteur marche/arrêt
6(–) bouton de réglage sensible
7(+) bouton de réglage intensif
8Bouton de réinitialisation
9 Ecran d’affichage du rasoir
0Prise d’alimentation du rasoir
q Trousse de voyage
w Cordon d’alimentation
Charge du rasoir
La température ambiante idéale pour la mise en
charge se situe entre 5 °C et 35 °C.
• A l‘aide du cordon d‘alimentation w, branchez
le rasoir à une prise de courant avec le moteur
arrêté et chargez-le pendant au moins une
heure
• Une charge complète procure jusqu’à 50
minutes de temps de rasage sans fil. Cela peut
varier selon la densité, la dureté et la longueur
de votre barbe.
STOP
94501402_730s-4_CEE.indd 994501402_730s-4_CEE.indd 9 13.08.12 08:5713.08.12 08:57

10
• Si la batterie est complètement déchargée,
vous pouvez également vous raser en
branchant le rasoir sur une prise de courant via
le cordon d‘alimentation.
Ecran d’affichage du rasoir 9
Le voyant vert clignote lorsque le rasoir est en
charge ou en utilisation.
Lorsque la batterie est complètement chargée, le
segment de charge « » (720) / « » « » (730) est
allumé en continu, quand le rasoir fonctionne ou
quand il est branché sur une prise de courant.
Mode stand-by
(le rasoir est arrêté mais branché sur le secteur)
Quelques minutes après la fin de charge, le
rasoir passe en mode stand-by : l’affichage
s’éteint.
L’indicateur « » rouge clignote quand le rasoir
fonctionne pour indiquer que la capacité de
la batterie est inférieure à 20 %. La capacité
restante est suffisante pour 2 à 3 rasages.
Personnalisez votre rasoir
Personnalisez votre rasoir
A l’aide des boutons de réglage sensible (–) 6
et intensif (+) 7, vous pouvez sélectionner
le meilleur réglage pour raser les différentes
zones de votre visage et pour répondre à vos
besoins spécifiques. Les différents réglages
sont indiqués par le voyant lumineux intégré à
l’interrupteur marche / arrêt 5:
• bleu foncé (rasage puissant)
• bleu clair (normal)
• blanc (pour un rasage doux, complet et
agréable des zones sensibles du visage ou
du cou)
Pour un rasage complet et rapide, nous
recommandons le réglage (+).
Lors de la prochaine mise en marche, le dernier
réglage utilisé sera sélectionné.
730 720
730 720
+normal
94501402_730s-4_CEE.indd 1094501402_730s-4_CEE.indd 10 13.08.12 08:5713.08.12 08:57