
17
Description
1a Precision beard comb (1-10 mm)
1b Precision hair comb (11-20 mm)*
2 Trimmer head
3 Length selector
4 On/off button
5 Charging indicator
6 Power socket
7 Special cord set (design can differ)
*not with all models
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for trimming is 15 °C to
35 °C. Do not expose the appliance to temperatures higher than 50 °C for
extended periods of time.
•Connect the appliance via the special cord set (7) to an electrical outlet.
•A full charge takes approx. 8 hours and provides up to 80 minutes of
cordless operation time.
•The charging indicator (5) shows that the appliance is being charged.
When the battery is fully charged, the charging indicator turns off.
•Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Usage
•Exchange the attachments only when the appliance is switched off.
•Place one of the precision combs (1a, 1b) over the trimmer head (2).
Beard Trimming / Hair Clipping
•Turn the length selector (3) to your desired cutting length. The comb
slides automatically up or down.
•Length settings precision beard comb (1a): 1 to 10 mm in 0,5 mm steps
•Length settings precision hair comb (1b): 11 to 20 mm in 0,5 mm steps
•Push the on/off button (4) to turn the appliance on.
•Trim against hair growth by guiding the flat comb part over the skin.
•Avoid clogging the comb with hair. Remove and clean it from time to time.
90591024_Type5517_BT_3242_3241_3240_3940_JP.indd 1790591024_Type5517_BT_3242_3241_3240_3940_JP.indd 17 07.06.19 09:0907.06.19 09:09
Business Use - P&G AUTHORIZED POA-00141539 Rev 001 Effective Date 2019-06-25 Printed 2020-10-06 Page 17 of 20