8
collection sites. However, if you prefer to dispose of the cell unit yourself,
remove the cell unit as shown on page 43.
How to operate the shaver
Your Lady Braun style has a switch lock
. It prevents the shaver from
turning on accidentally when stored away.
To unlock: push switch lock up
To lock: push switch lock down
The switch
turns both the foil shaving system and the two curved
trimmers on and off:
On = push switch up
Off = push switch down
Before shaving remove the protective cap
. Grasp both sides in the
middle and lift gently off. After you are finished, always put it back on
again to protect the foil against damage.
Before starting off
Before shaving, make sure your skin is completely dry.
Shaving
Hair removal with the combined actions of the Lady Braun style foil and
trimmer systems is fast, thorough, yet gentle to skin: The curved trimmers
first raise all long hairs and cut them off. Then the flexible foil
follows
to smooth away any stubble. For best results, hold the shaver so that
about half of the foil and one of the trimmers are in contact with your skin,
with the trimmer leading.
Guide the shaver slowly over your skin without pressing. The Lady Braun
style gives you equal shaving action on both trimmer sides, so you can
move the shaver forwards and backwards again. The large, rounded
shaver head lets you easily shave those difficult curvers and countours –
on knees, ankles, underarms, bikini line, for instance.
When you are finished
After shaving, you may want to smooth on a little body cream or lotion.
Caution, however, is advised in applying perfume or deodorants right
away.
Store your Lady Braun style in its bag (pouch) when not in use nor
recharging. Besides offering practical storage, it also protects the foil
against possible damage (a).
Keeping your Lady Braun style in good condition
Before cleaning, turn the shaver off. The foil of your Lady Braun style is a
precision part. To avoid damaging it, be careful when handling the shaver
head.
After every use: Remove the shaver head by pulling it off (b). Tap the
bottom (not the metal parts) on a flat surface (c).
Do not brush the shaver foil surface, because that may damage it. Then
give the top of the shaver a quick cleaning with the brush. Replace the
shaver head by clicking in place.
5575054_Lady_uni.fm Seite 8 Montag, 8. Juli 2002 8:55 08
