Braun SERIES 7 5692 User manual

www.braun.com
Series 7
Type 5692
trimmer
trimmer
trimmer
Series 7
Series 7
Series 7
black premium selection
790cc-4
limited design edition
99573201_790cc-4_KOR_Gifting.ind19 1999573201_790cc-4_KOR_Gifting.ind19 19 26.05.2010 14:02:10 Uhr26.05.2010 14:02:10 Uhr
Leporello, 110x200 mm, 18 pages, 2/2c = black + HKS43N

2
trimmer
trimmer
trimmer
on
off
on
off
trimmer
trimmer
trimmer
3 4
6
5
1
2
4a
9
8
10
11
12
15
14
17
18
19
7
20
Series 7
Series 7
Series 7
16
13
Series 7
Series 7
Series 7
trimmer
trimmer
trimmer
Series 7
Series7
Series 7
99573201_790cc-4_KOR_Gifting.ind2 299573201_790cc-4_KOR_Gifting.ind2 2 26.05.2010 14:01:58 Uhr26.05.2010 14:01:58 Uhr

3
Series 7
Series 7
STOP
99573201_790cc-4_KOR_Gifting.ind3 399573201_790cc-4_KOR_Gifting.ind3 3 26.05.2010 14:02:00 Uhr26.05.2010 14:02:00 Uhr

4
new
f
a
s
t
c
l
e
a
n
f
a
s
t
c
l
e
a
n
f
a
s
t
c
l
e
a
n
2
1
trimmer
Series 7
99573201_790cc-4_KOR_Gifting.ind4 499573201_790cc-4_KOR_Gifting.ind4 4 26.05.2010 14:02:00 Uhr26.05.2010 14:02:00 Uhr

5
h
y
g
i
e
n
e
b
a
t
t
e
r
y
99573201_790cc-4_KOR_Gifting.ind5 599573201_790cc-4_KOR_Gifting.ind5 5 26.05.2010 14:02:01 Uhr26.05.2010 14:02:01 Uhr

6
h
y
g
i
e
n
e
b
a
t
t
e
r
y
h
y
g
i
e
n
e
b
a
t
t
e
r
y
b
a
t
a
t
e
r
y
r
99573201_790cc-4_KOR_Gifting.ind6 699573201_790cc-4_KOR_Gifting.ind6 6 26.05.2010 14:02:02 Uhr26.05.2010 14:02:02 Uhr

7
t
r
lock
12
trimmer
lock
lock
lock
+
release
trimmer
99573201_790cc-4_KOR_Gifting.ind7 799573201_790cc-4_KOR_Gifting.ind7 7 26.05.2010 14:02:03 Uhr26.05.2010 14:02:03 Uhr

8
oil
trimmer
er
re
le
a
s
e
trimmer
re
le
a
s
e
re
le
a
s
e
click! Series 7
Series 7
Series
Series
re
le
a
s
e
re
le
a
s
e
re
le
a
s
e
Series 7
Series 7
new old
99573201_790cc-4_KOR_Gifting.ind8 899573201_790cc-4_KOR_Gifting.ind8 8 26.05.2010 14:02:03 Uhr26.05.2010 14:02:03 Uhr

9
h
y
g
i
e
n
e
b
a
t
t
e
r
y
m
er
re
le
a
s
e
70S
Series7
70S
99573201_790cc-4_KOR_Gifting.ind9 999573201_790cc-4_KOR_Gifting.ind9 9 26.05.2010 14:02:04 Uhr26.05.2010 14:02:04 Uhr

10
99573201_790cc-4_KOR_Gifting.ind10 1099573201_790cc-4_KOR_Gifting.ind10 10 26.05.2010 14:02:05 Uhr26.05.2010 14:02:05 Uhr

Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you enjoy your new Braun Shaver.
Warning
Your shaving system is provided with a special
cord set, which has an integrated Safety Extra
Low Voltage power supply. Do not exchange or
tamper with any part of it, otherwise there is risk
of an electric shock.
This appliance is not intended for use by children
or persons with reduced physical, sensory or
mental capabilities, unless they are supervised
by a person responsible for their safety. In
general, we recommend that you keep the
appliance out of reach of children. Children
should be supervised to ensure that they do not
play with the appliance.
To prevent the cleaning fluid from leaking, ensure
that the Clean&Renew station is placed on a flat
surface. When a cleaning cartridge is installed,
do not tip, move suddenly or transport the
station in any way as cleaning fluid might spill
out of the cartridge. Do not place the station
inside a mirror cabinet, nor over a radiator, nor
place it on a polished or lacquered surface.
The cleaning cartridge contains a highly
flammable liquid so keep it away from sources of
ignition. Do not smoke near the station. Do not
expose to direct sunlight for long periods of time.
Do not refill the cartridge and use only original
Braun refill cartridges.
Description
Clean&Renew station
1Cleaning fluid display
2Lift button for cartridge exchange
3Station-to-shaver contacts
4Start button
DFast clean button
5Cleaning program indicators
6Station power socket
7Cleaning cartridge
Shaver
8Foil & Cutter cassette
9Cassette «release» button
0Shaver head «lock» switch
qPop-out long hair trimmer
STOPSTOP
English
11
99573201_790cc-4_KOR_Gifting.ind11 1199573201_790cc-4_KOR_Gifting.ind11 11 26.05.2010 14:02:05 Uhr26.05.2010 14:02:05 Uhr

12
wOn/off switch
e(–) setting button (sensitive)
r(+) setting button (intensive)
tReset button
zShaver display
uShaver-to-station contacts
iShaver power socket
oTravel case
pSpecial cord set
Before shaving
Prior to first use you must connect the shaver to
an electrical outlet using the special cord set p
or alternatively proceed as below.
Installing the Clean&Renew station
• Using the special cord set p, connect the
station power socket 6to an electrical outlet.
• Press the lift button 2to open the housing.
• Hold the cleaning cartridge 7down on a flat,
stable surface (e.g. table).
• Carefully remove the lid from the cartridge.
• Slide the cartridge into the base of the station
as far as it will go.
• Slowly close the housing by pushing it down
until it locks.
The cleaning fluid display 1will show how much
fluid is in the cartridge:
up to 30 cleaning cycles available
up to 7 cleaning cycles remaining
new cartridge required
Charging and cleaning the shaver
Insert the shaver head down into the cleaning
station. (The contacts uon the back of the
shaver will align with the contacts 3in the
cleaning station).
If required, the Clean&Renew station will auto-
matically charge the shaver. The hygiene status
of the shaver will also be analyzed and one of
the following cleaning program indicators 5will
light up:
new
f
a
s
t
c
l
e
a
n
f
a
s
t
c
l
e
a
n
f
a
s
t
c
l
e
a
n
2
1
new
f
a
s
t
c
l
e
a
n
f
a
s
t
c
l
e
a
n
f
a
s
t
c
l
e
a
n
2
1
trimmer
Series 7
trimmer
Series 7
99573201_790cc-4_KOR_Gifting.ind12 1299573201_790cc-4_KOR_Gifting.ind12 12 26.05.2010 14:02:06 Uhr26.05.2010 14:02:06 Uhr

13
« » shaver is clean
« » short economical cleaning required
« » normal level of cleaning required
« » high intensive cleaning required
If the station selects one of the required cleaning
programs, it will not start unless you press the
start button 4.For best shaving results, we
recommend cleaning after each shave.
Whilst cleaning is in progress, the respective
cleaning program indicator will blink. Each
cleaning program consists of several cycles,
where cleaning fluid is flushed through the
shaver head and a heat drying process dries
the shaver. Depending on the program selected
the total cleaning time will range from 32 to 43
minutes.
The cleaning programs should not be inter-
rupted. Please note that whilst the shaver is
drying, the shaving head may be hot and wet.
When the program is finished, the blue « »
indicator will light up. Your shaver is now clean
and ready for use.
Fast cleaning
Push the fast clean button Dto activate
the fast clean program without drying. This
program takes about 25 seconds only and is
recommended when you do not have time to
wait for one of the automatic cleaning programs.
If you remove the shaver just after the program
has finished, wipe off the shaver head with a
tissue to avoid dripping.
Stand-by mode
10 minutes after completing the charging or
cleaning session, the Clean&Renew station
switches to the stand-by mode: The indicators
of the Clean&Renew station turn off.
Shaver display
The shaver display zshows the charge status of
the battery on the left, and the hygiene status on
the right. (6 dark segments are shown on each
side when the battery is fully charged and the
shaver is hygienically clean).
h
y
g
i
e
n
e
b
a
t
t
e
r
y
h
y
g
i
e
n
e
b
a
t
t
e
r
y
99573201_790cc-4_KOR_Gifting.ind13 1399573201_790cc-4_KOR_Gifting.ind13 13 26.05.2010 14:02:06 Uhr26.05.2010 14:02:06 Uhr

14
Battery segments:
During charging or when using the shaver, the
respective battery segments will blink. When
fully charged all 6 segments are shown. With
decreasing charge the segments gradually
disappear.
Low charge indicator:
The low charge indicator provided with a red
frame blinks to indicate that the charge has
dropped below 20%. The remaining battery
capacity is sufficient for 2 to 3 shaves.
Hygiene segments:
All 6 hygiene segments will appear after the
shaver has been cleaned in the Clean&Renew
station. When the shaver is being used, the
hygiene segments will gradually disappear.
Once the shaver is returned to the station, the
system will automatically select the appropriate
cleaning program and restore the segments
to maximum hygiene. Given that rinsing the
shaver under tap water is not as hygienic as the
cleaning station, the hygiene segments will only
restore themselves when the shaver has been
cleaned in the Clean&Renew station.
Charging information
• A full charge provides up to 50 minutes
of cordless shaving time. This may vary
according to your beard growth.
• The best environmental temperature for
charging is between 5 °C to 35 °C. Do not
expose the shaver to temperatures higher than
50 °C for extended periods of time.
Personalizing your shaver
Personalizing your shaver
With the (–) eand (+) rbuttons you can choose
the best setting for shaving different areas of
your face and as per your specific needs.
For a thorough and fast shave we recommend
the (+) setting.
When switching on next time, the last used
setting will be activated.
h
y
g
i
e
n
e
b
a
t
t
e
r
y
h
y
g
i
e
n
e
b
a
t
t
e
r
y
h
y
g
i
e
n
e
b
a
t
t
e
r
y
b
a
t
a
t
e
r
y
r
h
y
g
i
e
n
e
b
a
t
t
e
r
y
b
a
t
a
t
e
r
y
r
99573201_790cc-4_KOR_Gifting.ind14 1499573201_790cc-4_KOR_Gifting.ind14 14 26.05.2010 14:02:08 Uhr26.05.2010 14:02:08 Uhr

15
How to use
Press the on/off switch wto operate the shaver:
• The pivoting shaver head and floating foils
automatically adjust to every contour of your
face.
• To shave hard to reach areas (e.g. under the
nose) slide the shaver head «lock» switch 0to
the back position to lock the pivoting head at
an angle.
• To trim sideburns, moustache or beard, slide
the pop-out long hair trimmer upwards.
Tips for the perfect shave
For best shaving results, Braun recommends you
follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles
(90°) to your skin.
3. Stretch your skin and shave against the
direction of your beard growth.
Shaving with the cord
If the shaver has run out of power (discharged),
and you do not have the time to recharge it in the
Clean&Renew station, you may also shave with
the shaver connected to an electrical outlet via
the special cord set.
Cleaning
Automatic cleaning
After each shave, return the shaver to the
Clean&Renew station and proceed as described
above in the section «Before shaving».
All charging and cleaning needs are then
automatically taken care of. With daily use, a
cleaning cartridge should be sufficient for about
30 cleaning cycles.
The hygienic cleaning cartridge contains alcohol,
which once opened will naturally evaporate
slowly into the surrounding air. Each cartridge,
if not used daily, should be replaced after
approximately 8 weeks.
The cleaning cartridge also contains lubricants,
which may leave residual marks on the outer foil
frame after cleaning. However, these marks can
be removed easily by wiping gently with a cloth
or soft tissue paper.
t
r
lock
12
trimmer
lock
lock
lock
+
t
r
lock
12
trimmer
lock
lock
lock
+
releaserelease
trimmertrimmer
99573201_790cc-4_KOR_Gifting.ind15 1599573201_790cc-4_KOR_Gifting.ind15 15 26.05.2010 14:02:08 Uhr26.05.2010 14:02:08 Uhr

16
Manual cleaning
The shaver head is suitable for cleaning
under running tap water.
Warning: Detach the shaver from the
power supply before cleaning the shaver
head in water.
Rinsing the shaving head under running water
is an alternative way to keep the shaver clean,
especially when travelling:
• Switch the shaver on (cordless) and rinse
the shaving head under hot running water.
You may use liquid soap without abrasive
substances. Rinse off all foam and let the
shaver run for a few more seconds.
• Next, switch off the shaver, press the «release»
button 9to remove the Foil & Cutter cassette
8and let it dry.
• If you regularly clean the shaver under
water, then once a week apply a drop of
light machine oil on top of the Foil & Cutter
cassette.
Alternatively, you may clean the shaver using the
brush provided:
• Switch off the shaver. Remove the Foil & Cutter
cassette 8and tap it out on a flat surface.
Using the brush, clean the inner area of the
pivoting head. However, do not clean the
cassette with the brush as this may damage it.
Cleaning the housing
From time to time clean the housing of the
shaver and the Clean&Renew station with a
damp cloth, especially inside the cleaning
chamber where the shaver rests.
Replacing the cleaning cartridge
After having pressed the lift button 2to open the
housing, wait for a few seconds before removing
the used cartridge to avoid any dripping.
Before discarding the used cartridge, make sure
to close the openings using the lid of the new
cartridge, since the used cartridge will contain
contaminated cleaning solution.
oil
trimmer
er
re
le
a
s
e
trimmer
re
le
a
s
e
re
le
a
s
e
click! Series 7
Series 7
Series
Series
oil
trimmer
er
re
le
a
s
e
trimmer
re
le
a
s
e
re
le
a
s
e
click! Series 7
Series 7
Series
Series
re
le
a
s
e
re
le
a
s
e
re
le
a
s
e
Series 7
Series 7
re
le
a
s
e
re
le
a
s
e
re
le
a
s
e
Series 7
Series 7
new old new old
99573201_790cc-4_KOR_Gifting.ind16 1699573201_790cc-4_KOR_Gifting.ind16 16 26.05.2010 14:02:08 Uhr26.05.2010 14:02:08 Uhr

17
Keeping your shaver in top shape
Replacing the Foil & Cutter cassette / reset
To maintain 100% shaving performance, re-
place the Foil & Cutter cassette 8, when the
replacement symbol lights up on the shaver
display z(after about 18 months) or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the Foil & Cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
tfor at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
Available at your dealer or Braun Service
Centres:
• Foil & Cutter cassette 70S
(70-black = www.service.braun.com)
• Cleaning cartridge Clean&Renew CCR
Environmental notice
This product contains rechargeable
batteries. In the interest of protecting the
environment, please do not dispose of the
product in household waste at the end of
its useful life. Disposal can take place at a
Braun Service Centre or at appropriate
collection points provided in your country.
The cleaning cartridge can be disposed with
regular household waste.
Subject to change without notice.
For electric specifications, see printing on the
special cord set.
h
y
g
i
e
n
e
b
a
t
t
e
r
y
h
y
g
i
e
n
e
b
a
t
t
e
r
y
m
er
re
le
a
s
e
70S
Series7
m
er
re
le
a
s
e
70S
Series7
70S70S
99573201_790cc-4_KOR_Gifting.ind17 1799573201_790cc-4_KOR_Gifting.ind17 17 26.05.2010 14:02:09 Uhr26.05.2010 14:02:09 Uhr

99573201/V-10
Korea/GB
Series 7
99573201_790cc-4_KOR_Gifting.ind18 1899573201_790cc-4_KOR_Gifting.ind18 18 26.05.2010 14:02:10 Uhr26.05.2010 14:02:10 Uhr