Brewer Fitness TREADWALL Series User manual

TreadwallFT® Series
Owner’s Manual
Max and S Frames
87 York Ave. Randolph MA 02368 USA | 781-961-5200 | www.brewerfitness.com
Copyright 2019, Brewer Fitness Rev August 2019

i
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Table of Contents
Introduction / Registration
Safety tips / Specifications
Operating Instructions/hold setup
Making Your Treadwall a Success
Information for Your Staff
Training Tips/Guidelines
Activities & Promotional Ideas
Frequently Asked Questions
General Maintenance
Troubleshooting
Service Instructions
Assembly instructions
Support Frame Assembly
Main Channel Assembly
Glossary
Warranty
Contact Info
TREADWALL
FT ®
Series
Complete Owners Manual

1
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
INTRODUCTION
Vertical movement is a new category of training that works the whole body and
mind together.
The TreadwallFT series delivers a full range of workout opportunities - from a
remarkable aerobic burn to an upper-body core and grip-strength workout that
challenges the fittest athletes.
When introducing a Treadwall it is important that the staff understands how to
unlock the potential benefits of this powerful fitness tool.
The owner's manual is designed to help managers, staff and trainers take full
advantage of this equipment. This reference tool emphasizes the benefits of
vertical movement with links and resources to help integrate the wall into fitness
routines. In addition, there are incentive programs to help ramp up popularity and
much more.
PRODUCT REGISTRATION
Record your serial number here:________________________________
Please register your Treadwall with us by emailing us at
[e-mail] with your contact information and serial number to
complete your product registration.
You must make sure to register your new Treadwall to receive service updates.

2
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Safety Tips
Safety Tips
WARNING - Read all instrucons before assembling and using the Treadwall.
In General - Handling and Assembly:
Be careful when moving and installing larger Treadwall components as they require effort to li and aach. Some
steps require two individuals. Have a second person assist you during assembly and make sure to have two ladders
on hand.
Carefully read and understand the Treadwall Owner’s Manual. Provide a general overview of the basic operaons and
usage to new Treadwall users. Do not place other equipment or any items in the fall zone or onto the floor mat of the
Treadwall.
FT Multipurpose Specifications
Max Frames S Frames V Frames
Weight
Width climbing surface 4 feet/6 feet 4 feet/6 feet 4 feet/6 feet
Length climbing surface 18-20-22 feet 18-20-22 feet 18-20 feet
# hold Placements 144...264 144...264 144...240
Angle Range +10 to –35 deg +10 to –15 deg Vertical only
Electrical Requirement 9 V Plug-in
Transformer
9 V Plug-in
Transformer
9 V Plug-in
Transformer
Maximum Hold Size 2.5” high x 6”
wide
2.5” high x 6”
wide
2.5” high x 6”
wide
Included Holds (Pro) 36/45 custom
holds
36/45 custom
holds
36/45 custom
holds
Electronic Display (Pro) Distance, time,
calories
Distance, time,
calories
Distance, time,
calories
Floor Mat (Pro) 1.25" dual foam ,
black vinyl
1.25" dual foam ,
black vinyl
1.25" dual foam ,
black vinyl
Warranty
6 years parts,
one year elec-
tronics and labor
6 years parts,
one year elec-
tronics and labor
6 years parts,
one year elec-
tronics and labor

3
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Operating Instructions
INTRODUCTION
There are 2 or 3 primary controls to know about on the TreadwallFT units.
You can adjust the speed of the climb with the lever located on the right side of the machine, you
can adjust the angle of the wall with the lever placed on the left side of the machine (Max and S
only) and you can view and track the stats on your exercise with the digital counter on the right
side of the machine.
HOW THE TREADWALL® WORKS
It’s very simple, you can just hop on and climb! The weight of
your body will move the wall downwards. With our auto-stop
technology, if you stop climbing, the Treadwall will stop and wait
for you when your feet reach the bottom. The Treadwall will not
move unless you are on the wall and climbing upwards.
You can adjust the angle of the wall as well, which makes it
easily adaptable to a large variety of abilities and fitness goals.
Easier angles are great for aerobic workouts and focus on the
lower body. Overhanging angles target upper body strength and
really engage the core.
Use the digital counter to set goals, manage your progress, and
track your exercises. The counter will begin automatically
counting upwards when you start climbing, or you can set time
and distance goals on the setup screen.

4
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Operating Instructions
Speed Control
To control the speed of your climb you simply move the
lever up and down. At the “0” setting the Treadwall will be
completely stopped for most people or it may just barely
creep downwards for heavier individuals. At speed “10” the
wall is at its fastest and only requires about 50 pounds of
weight to move. The ideal setting will be different for
people of different weights.
Accurate current and average speeds are displayed on the
counter in feet/min. or meters/min as required.
Option 1 Option 2
Changing the Angle
The angle of the wall makes a big difference! The Treadwall can
be adjusted (Max and S Frames) over a range of angles from a
relatively easy slab to a very challenging overhang.
Increasing (harder) angles:
Option 1: while standing in front of the climbing
surface, pull down on angle lever and push the
surface back to desired degree of difficulty.
Option 2: while climbing, gently push down the angle lever and
the climbing angle will increase using your body weight.
Decreasing (easier) angles:
While standing in front of the machine, pull down on the angle
lever and the wall will swing back to an easier angle on its own.
You may have to assist by pulling the wall forward.

5
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Operating Instructions
Digital Counter
The counter will start as soon as you begin climbing. It will pause if
you rest for 5 seconds, and it will power down after 5 minutes of non-
use. To turn the counter back on just start climbing, or tap the
screen.
You can adjust the view angle by adjusting the small arm at the rear
of the counter.
0
Calories
Time
0
Distance
0
Speed
0
Average Speed
Reset
Setup ?
Done
Distance Goal
?
Time Goal
Hold buttons above for
distance and time goals
Enter weight
below for
0
00:00
0
1 2 3 4 5
6 7 8 9 0
Clear
Home Screen
The home screen shows real-time data for a single climb. When
you pause for 5 seconds the counter will hold your data on the
screen until you begin climbing again and then it will start from
where you left off. To reset the counter for a new climber hit
“Reset.”
Setup Screen
To set a distance or time goal tap or hold the buttons labeled
“Distance Goal” or “Time Goal”. The values will increase more
rapidly as you hold the buttons down longer.
The number pad allows you to enter your weight for a more
accurate calorie count. The default weight is 150 pounds.
When you are satisfied with your goal, hit done and the value
you selected will appear on the home screen.
You can only select a distance or a time goal, not both at once.

6
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Making Your Treadwall a Success
Groundwork:
Staff should understand that vertical movement is a basic human activity and part
of everyday life. It should be presented as a positive and accessible addition to
the facility.
Climbing will often be perceived as challenging and intimidating. A staff locked in-
to the value of vertical movement as a fitness tool is the key for changing this per-
ception. Members should be actively encouraged to try the Treadwall and consid-
er it for part of their workout routine. We have found that people who are initially
hesitant often end up being the biggest Treadwall fans.
Choosing an Advocate/Integration
When the Treadwall is first installed, it will be an unfamiliar item. Climbing will be
a relatively new training activity for most. We recommend that a staff person be
chosen as the main advocate for the product’s introduction period. This person
might take on the following responsibilities:
1. Read through the manual thoroughly to become familiarized with the Treadwall
operation procedures, use and set-up.
2. Formulate a plan to integrate this equipment into their classes, personal train-
ing or general usage.
3. Create fun ways to get you members hooked on Vertical Movement - challeng-
es, competitions and incentives (such as our popular Everest Club program).
Set up a meeting with trainers to Establish Goals and Discuss Ideas:
1. Cross-training for sports that emphasize forearm strength such as martial arts,
baseball, swimming and tennis.
2. Weight-loss programs. Focus on manageable goals, using easier positive an-
gles. Emphasize smoothness over speed.
3. For Cardiovascular try 15 minutes once a week or every two weeks in place of
a treadmill.
4. As a warm-up, especially for lifting. Suggest using ground-based training
(hands only) for larger lifters.

7
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Information for Your Staff
The Benefits of Vertical Movement: Valuable Information
Most fitness activities target isolated muscle groups, but vertical movement is differ-
ent. Using a Treadwall provides a full-body, non-repetitive exercise that can be
adapted by the user for different goals. You can customize the experience by ad-
justing the exercise patterns, angle of the wall and climbing speed.
In terms of focus and mental involvement, climbing has no peer. The activity re-
quires constant decision-making and concentration. This promotes a quick motor
response and muscle recruitment. Technique, balance and core strength interplay
and climbers often develop a heightened sense of body awareness and confi-
dence in their daily lives.
The Treadwall is very versatile. It can stand alone as a high- energy interval trainer,
with longer workouts to develop endurance, or as part of a circuit routine with oth-
er equipment.
Customize it to suit YOUR needs and GOALS:
1) You should use the equipment yourself. Get a first-hand look at how the workout
makes you feel, learning to access angle and speed to accommodate a range of
abilities. Experience the benefits of vertical movement personally.
2) At first, clients might consider this equipment to be intimidating, but knowledge
you can pass on to your members about training and benefits will help bridge the
gap.
3) Check out all the different ways it can be used, experimenting with different hand
grips, angles, speeds and body movement. Your personal experience and enthu-
siasm will engage the user. Be creative.
Encourage members and clients to try it out:
Introduce it at the easier positive angle first so that members can get familiar with
the balance and motions involved. The workout on the Quick Start guide at
www.brewersledge.com/ownersmanual is a good place to begin.
Emphasize controlled, smooth climbing and attention to balance and footwork.
Suggest short workouts to start, which will complement their current workout routine.

8
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Below you will find different training tips we have learned over the years
that can ease your clients into Vertical Movement.
Initial Exposure When your clients and members are trying out the Treadwall
for the first time:
1. Ensure speed is on zero before having them climb.
2. Ask if they would like you to control speed at first.
3. Encourage them to try adjusting the speed themselves: Set the speed to 0
and tell them to climb about half way up. Let them know that at settings 7
to 10 the speed is quite fast, so move the speed lever slowly. All they have
to do is hang on, reach for the speed lever, and pull it up a small amount.
4. Have them take it slow at first and focus on smooth movement.
5. Emphasize the need to move your feet above a certain panel to keep the
wall moving. Auto-stop will automatically stop the rotation as they approach
the bottom.
6. Tell them they can keep going even after the auto-stop has engaged, just
continue climbing and the wall will resume rotation.
Initial Workout:
Most people are unfamiliar with climbing holds, but the Treadwall Base set is
very user-friendly. If ordered, the Ladder Line is an excellent way to intro-
duce them to the basic balance and movements. Try having them start on
the Ladder Line first for a couple of minutes to get a feeling for it.
As they continue to climb, then suggest using a few of the climbing holds as
well as the Ladder rungs.
If the client is looking for a more complete challenging program, or you need
ideas, refer to our website where you will find complete training programs
and sample workouts.
Training Tips/Guidelines

9
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
QUICK HINTS:
1. Start them slow. Remind about auto-stop sensor panel.
2. Focus on Safety. Don’t jump off—ride it down. It will stop at the right height to
step off .
3. Tell them they are not very high off the ground if they seem reluctant (focus on
the padding below).
4. Mention the benefits of Vertical Movement so they are aware of WHY they
should use the equipment.
Full-Body/Burn Calories/Lean Muscle/Core Strength/Balance
1. Refer www.brewerfitness.com/ for downloadable versions of the Quick Start
guide, printable Training Logs, resources for articles on the benefits of climbing
etc.
2. Refer to our website for full training program ideas and short workouts.
Climbing is a progressive activity—there is a great deal to learn about balance and
technique. The initial workouts should emphasize the fun and excitement of re-
learning an activity that has roots in the earliest childhood years. As climbers pro-
gress and become more comfortable, they naturally and inevitably gravitate to the
more challenging aspects of the sport.
Climbers love “problems” - climbing problems that is. They seek them out. They talk
about them. They work on them—sometimes for months or even years. Few things
in life are more satisfying than solving a tricky, elusive “problem” that initially
seemed completely improbable if not downright impossible.
Training Tips/Guidelines

10
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Activities & Promotional Ideas
Setup a Mt. Everest club challenge for staff and members:
Perhaps use teams. (Brewer Fitness provides free Everest Club membership to the
first three staff members to complete the challenge.
Recognize the first members to start on Mt. Everest Club challenge:
Use the bulletin board to put up names and perhaps pictures.
Completing the Everest Challenge is a major accomplishment. Climbing 1000 feet a
day, seven days a week, it will take a full month. For most people it will take the bet-
ter part of a year. Anybody who completes this challenge will come out a different
person—fitter, stronger, healthier, and most likely more confident. An important ad-
vantage to having a Treadwall is being able to offer this unique program.
The Everest Club:
Climb 29,028 feet on the Treadwall and you are eligible to join. You can find
the Everest application and a training log at
www.brewerfitness.com/OwnersManual
Special incentive:
Brewer Fitness provides free Everest Club Membership to the first three staff
members to complete the Everest Challenge

11
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Elevation/Location
30' Typical street lamp
40’ Height of the Parthenon
190' Niagara Falls (American Side)
302' Statue of Liberty
555' Washington Monument
607' Space Needle, Seattle
642' Top Span, Astrodome roof.
984' Eiffel Tower, Paris
1250' Empire State Building, New York
1454' Sears Tower, Chicago
2,717’ Burj Khalifa (tower in Dubai)
3200' Angel Falls, Venezuela
4610' Mt. Vesuvius, Italy
5117' Devil's Tower, Wyoming
5267' Mt. Katahdin, Maine
6288' Mt. Washington, New Hampshire
7310' Mt. Koscivsko. high point in Australia
7569' El Capitan, Yosemite National Park
8842' Half Dome, Yosemite National Park
9570' Mt. Olympus, Greece
11245' Mt. Hood, Oregon
13766' Grand Teton, Wyoming
14161' Mt. Shasta, California
14495' Mt. Whitney, high point continental US
14692' The Matterhorn, Germany
Activities & Promotional Ideas
Other Ideas:
1. Other distances : trail length (Appalachian), Body of Water Length
(English Channel)
2. Weekly “Tread crew,” meet up group
3. Bi-monthly Competitions using wall (Triathlon: Rower, Pool, Tread-
wall) or other cardio pieces

12
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
How hard is climbing on the Treadwall?
Climbing on the Treadwall is as hard or as easy as you
choose. The wall is customizable in difficulty by altering the
speed, angle and route you follow.
How fast can I climb on the Treadwall?
The Treadwall is easily adjusted via the speed lever. In addition, the auto-stop sys-
tem will keep pace with your stops and starts. We recommend starting off climbing at
a slower controlled pace, focusing on smooth movement.
How does the Treadwall work?
The Treadwall operates by the weight of the climber. There are no electric motors. A hydrau-
lic brake controls the speed of descent. The Treadwall cannot move aer the climber steps
off.
How long should I climb for?
This depends on your objectives. Test out various methods and take a look at our
training section at www.brewerfitness.com
Will the hold pattern get repetitious?
Eventually, but it takes much longer that you might expect. The Treadwall has no beginning
or end, and it connually presents you with new challenges and possibilies. It is simple to
set holds in other places and change the climb completely.
Do I need special shoes to climb the Treadwall?
No. Any well fied athlec shoe will do quite well. However, special climbing shoes are more
enjoyable to climb in. Climbing shoes are very close fing with a special flat sole of special
'scky' rubber. They are quite expensive. Karate shoes are a good inexpensive alternave.
Can anybody use the Treadwall?
Almost anyone can perform vertical movement. Anyone with a serious physical prob-
lem should consult with their doctor, and people with very long fingernails should
think twice. We also suggest taking off your rings before climbing.
Can you be too old to climb?
Maybe, but we have reports of people well into their 70s who enjoy climbing on the
Treadwall. One climber 72 years old recently completed the Everest challenge
(29,028 ft.) - for the 10th time!
Q&A
Frequently Asked Questions

13
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Does everyone like it?
Most people who try the Treadwall love it. Some of the biggest fans are people who
start off saying "I don't think I'd like that." Everyone should be encouraged to give it a
try.
I have never done that. Will it take me long to learn?
Never climbed? - not likely. Most children spend many happy hours climbing play
equipment and trees. For adults, climbing on the Treadwall recaptures much of that
simple joy and natural vertical movement.
What kind of bodies does Vertical Movement build?
Climbing and gymnastics are similar, promoting muscle tone, flexibility and endurance
with increased agility and body awareness. Your body will respond by burning fat, cre-
ating a lean muscle structure and increasing bone density
Do serious climbers like the Treadwall? Yes, it is a perfect endurance training tool,
all the way from elite climbers to a novice.
Frequently Asked Questions

14
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
General Maintenance
INTRODUCTION
Treadwall® maintenance is easy and requires only lubrication and cleaning. The most
important maintenance of the Treadwall occurs during the first month of operation when the
chain and cables are stretching to their final length. It is very important to keep the angle-
adjuster cables tight during this break-in period so that the coils remain even and do not
overlap. Also the drive chain must be tightened after 2-3 weeks of use. Instructions for these
adjustments are included here.
THEORY OF OPERATION
TreadwallFT series is completely powered by the climber. The wall does not rotate by itself, but
only when a person begins to climb on the machine. You can vary the speed of climbing with
the lever located on the right side of the machine. This lever controls a hydraulic resistance
unit located at the top of the right channel. The hydraulic resistance mechanism is connected
to the main shaft with a short chain.
Our auto-stop system is triggered when the weight of the climber’s foot reaches the bottom
panel. The Treadwall will not move when someone is standing and not climbing upwards.
The internal sensor for this system is located at the bottom right side of the machine.
The panels slide through the side channels on small plastic buttons which help reduce friction
in the system.. These buttons are located on the top front face and the bottom rear corner of
each panel. The panels also contain welded fasteners which allow the climbing holds and
various attachments to be added in any configuration the user wishes.
The entire center section of the wall pivots to allow for the angle of the wall to change. This
is controlled by a patented system of synchronized cables. A lever on the left side of the unit
(Max and S frames only) releases the brake that hold the angle—this can be changed either
before using or while climbing.
There is an electronic counter on the right side of the machine (Pro models) that allows users
to track distance, time, and calories. The sensor for this system is located on the inside the
right channel. The sensor detects a series of magnets placed on the main shaft.

15
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
General Maintenance
After The First Month:
 Check the drive chain to make sure that it is not loose. Tighten if necessary.
 Check the alignment on the angle adjuster cables and adjuster cassette. Gently tighten any
slack that develops. Realign frame if needed.
Every 6 Months:
 Lubricate the side channels —This can be done more or less frequently depending on usage.
 Clean the Climbing holds and set new routes.
 Wipe down and clean machine.
Maintenance Schedule
How to access the inside of your Treadwall
The Treadwall wall panels are bolted to a set of chains. These two chains form a continuous
loop around the top and bottom axles. Each panel is attached to flanges mounted on the chains
with 4 Philips head bolts and 3/8” lock nuts.
Rotate the wall so that the desired panel is lined up with the access hole. Remove the cover,
then remove panel bolts and nuts. Rotate the wall downward and allow the panel to drop out at
bottom. Multiple panels can be removed in a similar manner if necessary. Rotate the wall until
the opening is at the height where service is required. Reverse this process to reattach the
panel and cover up the access hole.
Plasc access covers
Panel Bolts

16
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Troubleshooting
Problem Cause Solution
Entire Treadwall wobbles or moves Exterior X-bracing too loose
Tighten the exterior X-bracing
making sure that the entire
frame is square and level
Main channel section sways
side-to-side Internal x-bracing too loose.
Tighten Internal x-bracing. Do
not over-tighten. Tighten until
just firm. When you have com-
pleted this adjustment, make
sure locknuts on the turnbuck-
les are very tight
Chain makes slapping noise Drive chain too loose
Tighten drive chain and make
sure that lock nut is tightened
firmly
Speed control lever does not work control cables may need ad-
justing
Remove hydraulic cover and
inspect the path and tightness
of the control cable.
Auto stop doesn’t work or works er-
ratically
Microswitch needs adjust-
ment
Check and adjust the small
switch at the bottom of the right
channel. Also, make sure that
unit is plugged in and receiving
adequate power .
Wall is sluggish: lighter weights will
not pull wall down
Either the drive chain too
tight, the channels need lu-
brication, or the ends of the
panels are rubbing the chan-
nels
Loosen the drive chain, lubri-
cate the Treadwall, and check
the internal x-bracing
Hold rotates
Hold bolts not sufficiently
tightened
Re-check hold bolts; re-tighten
with a 5/16” Allen Wrench
Display does not power on
The Treadwall is not plugged
in, not receiving adequate
power, there is a loose con-
nector, or a wire is cut
Check that the Treadwall is
plugged in and the power outlet
is working. Check all connect-
ors and cables for good fit and
good condition
Display is powered up but will not
start counting
Sensor and magnets not ad-
justed properly, broken, or
missing
Check the sensor located on
the inside top of the right chan-
nel. The gap should be no
more than 1/8”

17
Treadwall®FT Owner’s Manual—2019 Rev Aug 2019
Service Instructions
Frame Alignment
Adjust to these dimensions if the wheel is on the
right side (as shown). If the wheel is on the other
side, adjust so that there is a bit more room on
the wheel side. This will make the angle
adjustment easier. The slight angle of
misalignment will not affect the operation of the
Treadwall.
Internal X-bracing adjustment
If the internal X-bracing is too tight the panels may be restricted in their movement. If too loose,
the wall can sway from side to side.
For best function the center section of the Treadwall should hang level with both turnbuckles
approximately the same length.
TO adjust the x-bracing, remove the plastic covers at the bottom of the channels, loosen the
lock nut on the x-bracing, and then adjust until the wall is straight and level and you can not
easily move the center section from side to side.
Location of turnbuckles
Plastic access covers
Older M6 Pro shown for illustraon only